Journals / Mühendislik Bilimleri Dergisi / 2000 / Cilt: 6 - Sayı: 2

A study on temperature optimization of quinizarine obtainment

Kinizarin eldesi işleminin sıcaklık optimizasyonu üzerine bir çalışma

Pages
259–261
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the end of the work, it was observed that the highest yield was obtained at the experiment in which the temperature is gradually increased and then, maintained at 250 °C.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it was investigated the effect of temperature on obtainment of quinizarine, which is an important raw material for textile dystuffs based on anthraquinone.
📊
Key Findings & Data:For this purpose, the experiment was performed at three different temperature in laboratory.
💡
Conclusion & Impact:At the end of the work, it was observed that the highest yield was obtained at the experiment in which the temperature is gradually increased and then, maintained at 250 °C.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, it was investigated the effect of temperature on obtainment of quinizarine, which is an important raw material for textile dystuffs based on anthraquinone. For this purpose, the experiment was performed at three different temperature in laboratory. Melting points of products obtained were observed and they were analyzed by IR spectrometer. In this way, optimum temperature conditions were determined. At the end of the work, it was observed that the highest yield was obtained at the experiment in which the temperature is gradually increased and then, maintained at 250 °C.

Özet

Bu çalışmada antrakinon esaslı tekstil boyarmaddeleri için önemli hammaddelerden birisi olan kinizarinin eldesi üzerine sıcaklığın etkisi araştırıldı. Bu amaçla laboratuvar şartlarında üç farklı sıcaklıkta deney gerçekleştirildi. Elde edilen ürünlerin erime noktalan tayin edildi ve IR spektrumları çekildi. Bu tarzda optimum verim için sıcaklık şartları belirlenmeye çalışıldı. Yapılan deneyler sonucunda, en yüksek verime kademe kademe arttırılarak 250°C' da gerçekleştirilen deney şartlarında ulaşıldığı gözlendi.

🔖

Cite This Article

ALICILAR, A., MURATHAN, A. M., BALBAŞI, M. (2000). A study on temperature optimization of quinizarine obtainment. Mühendislik Bilimleri Dergisi, Cilt: 6 - Sayı: 2, 259–261. https://ajindex.com/articles/289342

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Confrancesso, A. J. 1982.
  2. Anthraquinone Dyes, General Anilin & Film Corporation, New York. Erdik, E. ve Ark., 1978.
  3. Denel Organik Kimya, A. Ü. Fen Fakültesi Organik Kimya Araştırma Ensitüsü Yayınları, Ankara. http://chipo.chem.uic.edu/web1/ocol/spec/IR.htm.
  4. Othmer, K. 1978.
  5. Encyclopedia of Chemical Technology, John Wiley & Sons, New York. Özcan, Y. Ulusoy, E. 1978.
  6. Tekstil Elyaf ve Boyama Tekniği, İstanbul Üniversitesi Yayınları,
  7. İstanbul.
  8. Özgirgin, M. 1986.
  9. Boyarmadde Kimyası, Milli Eğitim Basımevi, İstanbul.
  10. Schmitz, R. 1983. Process for the Preparation of Quinizarine, United States Patent, 4387054. Shrader, M. O. 1956.
  11. Production of Quinizarine, United States Patent, 2752364. Venkataraman, K. 1952.
  12. The Chemistry of Synthetic Dyes, Volume 2, Academic Press, New York.