SavedAdd your journal

Journals / Mühendislik Bilimleri Dergisi / 2003 / Cilt: 9 - Sayı: 2

Geotechnical design of solid waste landfill sites

Katı atık depo alanlarının geoteknik tasarımı

SUAT AKBULUT
Pages
223–230
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, leachate collection and removal facilities, landfill gas collection unites, and final cover unites were evaluated in a detailed way.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Solid waste landfills are important engineering structures for protection of wastes, decrease of environmental pollution, and especially prevention of soil and water pollution.
📊
Key Findings & Data:Solid wastes should conveniently be maintained in landfill areas to control environmental pollution caused by waste disposals.
💡
Conclusion & Impact:Also, leachate collection and removal facilities, landfill gas collection unites, and final cover unites were evaluated in a detailed way.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Solid waste landfills are important engineering structures for protection of wastes, decrease of environmental pollution, and especially prevention of soil and water pollution. Solid wastes should conveniently be maintained in landfill areas to control environmental pollution caused by waste disposals. Until the middle of this century clay liners were used for maintenance of waste disposal, but it was observed that these liner systems were insufficient. Today thinner and less permeable liner systems are constructed by using synthetic materials. In this study, by evaluating the waste landfills, site assessment of landfills and construction of natural and synthetic liner systems were summarized respectively, and especially the design properties of these systems were examined intensively. Also, leachate collection and removal facilities, landfill gas collection unites, and final cover unites were evaluated in a detailed way.

Özet

Katı atık depoları atıkların muhafaza edilmesi, çevre kirliliğinin azaltılması, özellikle toprak ve su kirliliğinin önlenmesi açısından önemli mühendislik yapılarıdır. Atıkların neden olduğu çevre kirliliğini kontrol etmek için atıklar uygun şekilde depolama alanlarında muhafaza edilmelidir. Bu yüzyılın ortalarına kadar atıkların muhafaza edilmesi için kil şilteler kullanılmış fakat bu şilte sistemlerinin yetersiz olduğu gözlenmiştir. Günümüzde sentetik malzemeler kullanılarak daha ince ve daha geçirimsiz şilte sistemleri yapılmaktadır. Bu çalışmada atık depolarının değerlendirilmesi yapılarak sırası ile depo yerinin tespit edilmesi, doğal ve sentetik şilte sistemlerinin yapısı özetlenmiş ve bu sistemlerin tasarım özellikleri ayrıntılı olarak incelenmiştir. Ayrıca, sızıntı toplama ve uzaklaştırma tesisleri, depo gazı toplama üniteleri ve örtü tabakası birimleri detaylı olarak irdelenmiştir.

🔖

Cite This Article

AKBULUT, S. (2003). Geotechnical design of solid waste landfill sites. Mühendislik Bilimleri Dergisi, Cilt: 9 - Sayı: 2, 223–230. https://ajindex.com/articles/289259

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Akbulut, S. 1995. Katı Atık Depolarının Geoteknik Yönden Değerlendirilmesi, Atatürk Üniv., Fen Bil. Enst., Y. Lisans Tezi, Erzurum. Alberta, E. 1985. Design and Construction of Liners for Municipal Wastewater Stabilization Ponds, Report, Alberta Environment Publication, Edmonton, Canada. Anonymous, 1989a. EPA “Final Covers on Hazardous Waste Landfills and Surface Impoundments”, EPA/530-SW-89-047,
  2. OSW, Washington, DC. Anonymous, 1989b.
  3. SCS Engineers Inc. “Landfill Gas Monitoring and Control Systems”, Procedural Guidance Manual for Sanitary Landfills, California Waste Management Board, Vol. 2, Sacramento, CA, April. Benson, C. H., Daniel, D. E. 1990. “ Influence of Clods on Hydraulic Conductivity of Compacted Clays”, Journal of Geotechnical Engineering, pp 1231-1248, Vol. 113, No 12. Bouazza, A. 2002.
  4. Geosynthetic Clay Liners, Geotextiles and Geomembranes, 20, pp. 3-17.
  5. Bouazza, A., Van Impe, W. F. and Van Den Broeck, M. 1996. “Hydraulic Conductivity of a Geosynthetic Clay Liner Under Various Conditions”, Proc. of the Sec. Int. Congress on Landfills, Vol. 1, Cagliari, Italy, pp. 595-610.
  6. Cope, F. G. Karpinksi, J. P. and Stein, L. 1984. “Use of Liners for Containment of Hazardous Waste Landfills”, Pollution Engineering, Vol. 16, No 3. Daniel, D. E. 1993. Geotechnical Practice For Waste Disposal, Chapman& Hall Pub. London, UK. Daniel, D. E., Benson, C. H. 1990. “Water Content-Density Criteria for Compacted Soil Liners”, Journal of Geotechnical Engineering, pp. 1811-1830, Vol. 116, No 12, December. Daniel, D. E. and Wu, Y. K. 1993. “Compacted Clay Liners and Covers For Sites”, Journal of Geotechnical Engineering, Vol. 119, No 2, pp. 223-237.
  7. Dawson, G. W., Merger, B.W. 1973. “Site Selection Criteria Areas as Delineated in The 1973 Report to Congress”, Hazardous Waste Management, pp. 465-468.
  8. Giroud, J. P., Soderman, K. L. 2000. Criterion for Acceptable Bentonite Loss From a GCL Incorporated into a Liner System. Geosynthetics International, 7 (4-6), pp. 529-581.
  9. Koerner, R. M. 1985. “Landfilling, Liners and Covers for Waste Disposal”, Construction and Geotechnical Methods in Foundation Engineering, McGraw-Hill, Inc. New York. Koerner, R. M. 1993. “Geomembran Liners”, Geotechnical Practice for Waste Disposal, Chapman&Hill Pub., pp. 164-186,
  10. London, UK. Lake, C. B. and Rowe, R. K. 2000. Diffusion of Sodium and Chloride Through Geosynthetic Clay Liners, Geotextiles and Geomembranes, 18, pp. 103-131.
  11. Moshiri, G. A. and Miller, C. C. 1992. “An Integrated Solid Waste