SavedAdd your journal

Journals / Mühendislik Bilimleri Dergisi / 2003 / Cilt: 9 - Sayı: 1

Dobby shedding mechanism on weaving machines: Part 1-Analysis

Dokuma makinalarında armürlü ağızlık açma mekanizmaları: Bölüm1-İnceleme

Gabil ABDULLAYEV
ALİ SERKAN SOYDAN
Barış HASÇELİK
Pages
103–113
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The first part of the paper includes a classification and analysis of dlobby machines: besides the information obtained from patent application is included.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The project "High Speed Dobby Design for Weaving Machines" with the number of MİSAG-139. which was carried out the Textile Department of Engineering Faculty at Pamukkale University between the dates 10.08.1999 - 01.08.2001. was successfully completed and approved by TÜBİTAK (The Scientific and Technical Research Council of Turkey).
📊
Key Findings & Data:The project "High Speed Dobby Design for Weaving Machines" with the number of MİSAG-139. which was carried out the Textile Department of Engineering Faculty at Pamukkale University between the dates 10.08.1999 - 01.08.2001. was successfully completed and approved by TÜBİTAK (The Scientific and Technical Research Council of Turkey).
💡
Conclusion & Impact:The first part of the paper includes a classification and analysis of dlobby machines: besides the information obtained from patent application is included.
🔬Design:Research Article
📍Scope:2001 Verileri
⚙️Variables:Domain Parameters

Abstract

The project "High Speed Dobby Design for Weaving Machines" with the number of MİSAG-139. which was carried out the Textile Department of Engineering Faculty at Pamukkale University between the dates 10.08.1999 - 01.08.2001. was successfully completed and approved by TÜBİTAK (The Scientific and Technical Research Council of Turkey). The first part of the paper includes a classification and analysis of dlobby machines: besides the information obtained from patent application is included.

Özet

PAÜ Mühendislik Fakültesi Tekstil Mühendisliği Bölümü'nde 10.08.1999 - 01.08.2001 tarihleri arasında yürütülmüş olan MİSAG-139'Nolu "Dokuma Makinaları için Yüksek Hızlı Armür Dizaynı" adlı proje başarıyla sonuçlanmış ve TÜBİTAK tarafından onaylanmıştır. Proje çerçevesinde yapılan araştırmalar ve elde edilen sonuçlar ile ilgili bilgiler makalemizin ana hatlarını oluşturmaktadır. Makalenin birinci bölümünde, proje içerisinde bahsi geçen armür makinalarının sınıflandırılması ve analizi hakkında literatür çalışması ve patent araştırmalarından elde edilen bilgiler yer almaktadır.

🔖

Cite This Article

ABDULLAYEV, G., SOYDAN, A. S., HASÇELİK, B. (2003). Dobby shedding mechanism on weaving machines: Part 1-Analysis. Mühendislik Bilimleri Dergisi, Cilt: 9 - Sayı: 1, 103–113. https://ajindex.com/articles/289229

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Adanur, S. 2001.
  2. Handbook of Weaving, Auburn University, Alabama U.S.A. Anonymous, 1999a. Stäubli® High-Performance Negative Dobby 2500, CH-8810 Horgen, Schweiz. Anonymous, 1999b. Stäubli® High-Performance Rotaryy Dobby 2000, CH-8810 Horgen, Schweiz. Anonymous, 1999c. Stäubli® Hochlistungs-Rotations- Schaftmaschine 2600, CH-8810 Horgen, Schweiz. Anonymous, 2000a. Fimtextile® RD 3000 S.p.A.-24028 Ponte Nossa, İtalya. Anonymous, 2000b. Muratec Type MX-10 Negatif Armür Kataloğu, Murata Machinery Ltd., Green-Bldg, 2-6-26
  3. Kitahma, Choku, Osaka, 541-0041, Japonya. Anonymous, 2000c. Tsudakoma ZA209i Hava Jetli Tezgah Kataloğu, Tsudakoma Crop., Nomachi Kanazawa, 921-91, Japonya. Anonymous, 2002.
  4. Toyota Textile Machinery, Toyoda-cho, Kariya-shi, Aichi 448-8671, s. 9, Japan. Disky, A. B. 1983. Dokuma Makinalarının Tasarımının Temelleri, 96-97 Moskova (Rusça). Eren, R. 2000.
  5. Armürlü Ağızlık Açama Mekanizmaları, Tekstil Maraton Dergisi, 46-55.
  6. Svaty, V. and Talavasek, O. 1975. Bezčlunkovĕ Stavy, 139-141
  7. Prag. Terentyev, V. 1978.
  8. Armürlerin İncedlenmesi ve Tasarımı, MTA, Moskova (Rusça). Truyevsev, N. İ. 1969. Lifli Malzemelerin Mekanik Teknolojisi, 454-455, Moskova (Rusçca).