SavedAdd your journal

Journals / Mühendislik Bilimleri Dergisi / 2003 / Cilt: 9 - Sayı: 1

A new approach at surface engineering; duplex surface treatment

Yüzey mühendisliğinde yeni bir yaklaşım dubleks yüzey işlemi

Akgün ALSARAN
AYHAN ÇELİK
MEHMET KARAKAN
ALİ FATİH YETİM
Pages
1–7
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, the duplex surface treatment was deal with -main lines send informed .about advantage and disadvantage.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Duplex surface process was developed to deposite thin ceramic film coating on commonly manufacturing used low alloy steels.
📊
Key Findings & Data:Low alloy steel having low strength by this process was first plasma nitrided with purpose enhancing load bearing capacity and then deposited with such ceramic coating.
💡
Conclusion & Impact:In this study, the duplex surface treatment was deal with -main lines send informed .about advantage and disadvantage.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Duplex surface process was developed to deposite thin ceramic film coating on commonly manufacturing used low alloy steels. Low alloy steel having low strength by this process was first plasma nitrided with purpose enhancing load bearing capacity and then deposited with such ceramic coating. In this study, the duplex surface treatment was deal with -main lines send informed .about advantage and disadvantage.

Özet

Dubleks yüzey işlemleri, imalatta yaygın olarak kullanılan düşük alaşımlı çeliklere ince seramik film kaplamak için geliştirilmiştir. Bu yöntemle, düşük mukavemete sahip az alaşımlı çeliğin ilk olarak plazma ile nitrürasyon işlemi uygulanarak yük taşıma kapasitesi artırılmakta ve sonra üzerine seramik kaplamalar yapılmaktadır. Bu çalışmada, dubleks yüzey işlemleri ana hatları ile ele alınmış, avantaj ve dezavantajları hakkında bilgi verilmiştir.

🔖

Cite This Article

ALSARAN, A., ÇELİK, A., KARAKAN, M., YETİM, A. F. (2003). A new approach at surface engineering; duplex surface treatment. Mühendislik Bilimleri Dergisi, Cilt: 9 - Sayı: 1, 1–7. https://ajindex.com/articles/289225

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Alsaran, A. and Çelik, A. 2001. The Structural Characterization of Ion Nitrided AISI 5140 low alloy steel. Mater. Chart, 47 (3-4), 207-213.
  2. Alsaran, A., Karakan, M. and Çelik, A. 2002a. The Investigation of Mechanical and Structural Properties of ion-nitrided AISI 5140 Low Alloy Steel. Mater. Chart, 48, 323-327.
  3. Alsaran, A., Çelik, A. and Çelik, C. 2002b. Determination of Optimum Conditions For the Ion Nitriding of AISI 5140. Surface and Coating Technology, 160, 219-226.
  4. Bader, M., Spies, H.J., Höck, K., Broszeit, E. and Schröder, H. J. 1998. Properties of duplex Treated (Gas-nitriding and PVD-TiN, -Cr2N) Low Alloy Steel. Surf. and Coat. Tech., 98, 891-896.
  5. Bhushan, B. and Gupta, K. B. 1991.
  6. Handbook of Tribology. McGraw-Hill, U.S.A. Çelik, A. and Karadeniz, S. 1995. Improvement of Fatigue Strength of AISI 4140 Steel by ion Nitriding Process. Surf. and Coat. Tech., 72, 169-173.
  7. Çelik, A. and Karadeniz, S. 1996. Investigation of Compound Layer Formed During ion Nitriding of AISI 4140 Steel. Surf. and Coat. Tech., 80, 283-286.
  8. Dingremont, N., Bergmann, E., Collignon, P. and Michel, H. 1995. Optimisation of Duplex Coatings Built From Nitriding and Ion Plating With Continuous and Discontinuous Operation For Construction and Hot Working Steels. Surf. and Coat. Tech., 72, 163-168.
  9. Edenhofer, B. 1974. Physical and Metallurgical Aspect of Ionitriding. Heat Treat. of Metals, 2, 23-28.
  10. Gredic, T., Zlatanovic, M., Popovic, N. and Bogdanow, Z. 1993. Effect of Plasma Nitriding on the Properties of (Ti, Al)N Coatings Deposited onto Hot Working Steels Substrates. Thin Solid Films, 228, 261-266.
  11. Haen, J. D., Quaeyhaegens, C, Knuyt, G, De Schepper, L., Stals, L.M. and Van Stappen, M. 1993. An Interface Study of Various PVD TiN Coatings on Plasma-Nitrided Austenitic Stainless Steel AISI 304. Surf. and Coat. Tech., 60, 468-473.
  12. Kadlec, J, Hruby, V and Novac, M. 1990. Influencing Properties of High-Speed Cutting Steel. Vacuum, 41 (7-9), 2226-2229.
  13. Karamış, B. and Gerçekçioğlu, E. 2000. Wear Behaviour of Plasma Nitrided Steels at Ambient and Elevated Temperature. Wear, 243, 76-84.
  14. Kaufman, H. 1995. Industrial Applications of Plasma and ion Surface Engineering. Surf. and Coat. Tech., 74-75, 23-28.
  15. Korhonen, A. S., Sirvio, E. H. and Sulonen, M. S. 1983. Plasma Nitriding and ion Nlating With an Intensified Glow Discharge. Thin Solid Films, 107, 387-394.
  16. Kramer, B. M. 1983. Requirements for Wear- Resistant Coating, Thin Solid Films, 108, 117-121.
  17. Liang, W., Yuzhou, G. and Bin, X.