SavedAdd your journal

Journals / Mühendislik Bilimleri Dergisi / 2004 / Cilt: 10 - Sayı: 3

CNC lathe machine producing NC code by using dialog method

CNC torna tezgahları için dialog metodu kullanılarak NC kod türetilmesi

YAKUP TURGUT
İHSAN KORKUT
Mehmet Tolga AKINCI
Pages
299–304
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The program was developed using BASIC 6.0 programming language while the material and cutting tool database were and supported with the help of ACCESS 7.0.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, an NC code generation program utilising Dialog Method was developed for turning centres.
📊
Key Findings & Data:By using geometric definition methods, tool path was generated and CNC part program was developed for FANUC control unit.
💡
Conclusion & Impact:The program was developed using BASIC 6.0 programming language while the material and cutting tool database were and supported with the help of ACCESS 7.0.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, an NC code generation program utilising Dialog Method was developed for turning centres. Initially, CNC lathes turning methods and tool path development techniques were reviewed briefly. By using geometric definition methods, tool path was generated and CNC part program was developed for FANUC control unit. The developed program made CNC part program generation process easy. The program was developed using BASIC 6.0 programming language while the material and cutting tool database were and supported with the help of ACCESS 7.0.

Özet

Bu araştırmada, CNC torna tezgahları için Diyalog Yöntemi ile NC Kodu üreten bir bilgisayar programı geliştirilmiştir. Öncelikle, CNC torna tezgahları, tornalama metotları ve takım yolu oluşturma teknikleri araştırılmıştır. Takım yolunun oluşturulmasında, geometrik tanımlama teknikleri kullanılarak, FANUC formatına uygun CNC parça programı türetilmiştir. Bu çalışma ile geometrik tanımlama teknikleri yardımı ile, CNC parça programı hazırlama işlemi kolaylaştırılmıştır. Geliştirilen bilgisayar programı VISUAL BASIC 6.0 programlama dili ile yazılmıştır. Program ACCESS 7.0'da hazırlanan malzeme ve kesici takım veri tabanları ile desteklenmiştir.

🔖

Cite This Article

TURGUT, Y., KORKUT, İ., AKINCI, M. T. (2004). CNC lathe machine producing NC code by using dialog method. Mühendislik Bilimleri Dergisi, Cilt: 10 - Sayı: 3, 299–304. https://ajindex.com/articles/289195

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Berra, P. B., Barash, M. M. 1971. A Computerized Algorithm for the Planning and Optimization of a Manufacturing Process, Computer Aided Design, pp. 24-25.
  2. Bogert, R. M., Kals, H. J. J., Van Houten, F. J. 1996. "Tool Paths and Cutting Technology in Computer Aided Process Planning", International Journal of Advanced Manufacturing Tehnology, Vol. 11, No. 3, p. 186-197.
  3. Croocal, J. R., Smith, J. A. 1971. Program AUTOPLAN for the Derivation of Operation and Machining Conditions in Multi Operational Turning, Proceeding the 2th International Conference on Product Development of Manufacturing Tecnology, University of Stracthclyd. Inoue, K. 1976. Data Structure in Software for Lathe Operations, Annals of the CIRP, Vol. 25/1, pp. 423-425.
  4. Koloc, J., Bouwer, L. I. 1974. Procssing of Geometry in a Technologically Oriented Programming System. Tekiner, Z., Korkut, İ. 2000. "Iges Veri Yapısı Kullanılarak Dönel Parçalarda Süreç Planlama", Makina Tasarım ve İmalat Dergisi, 3, 232-241.
  5. Subrohmanyam, W., Somoshekar, M. 1995. "Overview of Automatic Feature Recognition Techniques For Computer Aided Process Planning", Computer in Indusrtry, Vol. 26, No. 1, p. 1 -21, Apr.