SavedAdd your journal

Journals / Mühendislik Bilimleri Dergisi / 2005 / Cilt: 11 - Sayı: 1

Usage of standard personal computer ports for designing of the double redundant fault-tolerant computer control systems

Çift yedeklenmiş arıza-kaldırılabilir bilgisayar kontrol sistemleri tasarımında standart bilgisayar portlarının kullanımı

Rafig SAMEDOV
Ahmet ÇİFTÇİ
Pages
31–40
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, the method for choosing of the most optimal structure version has been suggested.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, for designing of the fault-tolerant control systems by using standard personal computers, the ports have been investigated, different structure versions have been designed and the method for choosing of an optimal structure has been suggested.
📊
Key Findings & Data:After that, the structure versions have been designed and evaluated according to the used data transmission methods, the numbers of ports and the criterions of reliability, performance, truth, control and cost.
💡
Conclusion & Impact:Finally, the method for choosing of the most optimal structure version has been suggested.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, for designing of the fault-tolerant control systems by using standard personal computers, the ports have been investigated, different structure versions have been designed and the method for choosing of an optimal structure has been suggested. In this scope, first of all, the ÇİFTYAK system has been defined and its work principle has been determined] Then, data transmission ports of the standard personal computers have been classified and analyzed. After that, the structure versions have been designed and evaluated according to the used data transmission methods, the numbers of ports and the criterions of reliability, performance, truth, control and cost. Finally, the method for choosing of the most optimal structure version has been suggested.

Özet

Bu çalışmada, standart bilgisayar kullanılarak arıza-kaldırılabilir kontrol sistemi tasarımı için portlar araştırılmış, değişik yapı versiyonları tasarlanmış ve en uygun yapıyı seçmek için yöntem önerilmiştir. Bu kapsamda önce ÇİFTYAK sistemi tanımlanmış ve çalışma prensibi belirlenmiştir. Sonra standart bilgisayarda veri iletim yöntemlerinde portlar sınıflandırılarak analizi yapılmıştır. Daha sonra kullanılan veri iletim yöntemlerine ve port sayısına göre yapı versiyonları tasarlanarak güvenilirlik, performans, doğruluk, kontrol ve maliyet gibi kriterlere göre değerlendirilmiştir. Son olarak ÇİFTYAK sistemi için en uygun yapı versiyonu seçmek için yöntem önerilmiştir.

🔖

Cite This Article

SAMEDOV, R., ÇİFTÇİ, A. (2005). Usage of standard personal computer ports for designing of the double redundant fault-tolerant computer control systems. Mühendislik Bilimleri Dergisi, Cilt: 11 - Sayı: 1, 31–40. https://ajindex.com/articles/289170

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Avizienis, A. 1971. The STAR (Self-Testing-And-Repairing) Computer: An Investigation of the Theory and Pratice of Fault-Tolerant Computer Design. IEEE Trans. Computer, Vol. C-20, No. 11, pp. 1312-1321. 2.Avizienis, A. 1978. Fault-tolerance: The Survival Attribute of Digital Systems. Proceeding of the IEEE, Vol. 66, No. 10, pp. 5-25. 3.Axelson, J. 1998.
  2. Serial Port Complete, Lakeview Research. 4.Axelson, J. 1999.
  3. Parallel Port Complete, Lakeview Research. 5.Axelson, J. 2001.
  4. USB Complete, Lakeview Research. 6.Borgerson, B. R. 1972. "A Fail-Softly System for Time-Sharing Use" Digest 1972 International Symposium. Fault-Tolerant Computering, Newton, M. A., pp. 89-93. 7.Bouricius, W., Carter, W., Jessep, D., Schneider, P. & Wadia, A. 1995. "Reliability Modeling for Fault Tolerant Computers," Fault-Tolerant Computing. 8.Downing, R. W., Nowak, J. S. and Tuomenoksa, L. S. 19647 No. 1 ESS Maintenance Plan. Bell Syst. Tech. J., Vol. 43, No. 5, Part 1, pp. 1961-2019. 9.Fox, G. C, Willims, R. D., Messina, P. C. 1995.
  5. Parallel Computing Works, Morgan Kaufmann Publishers,
  6. Inc., ISBN 1-55860-253-4. 10.Hopkins, A. L., Smith, T. B., Lala, J. H. 1978. FTMP-A. Highly Reliable Fault-Tolerant Multiprocessor for Air Craft. Proceeding of the IEEE, Vol. 66, No.10, pp,142-165. 11.Ihara, H. Fukuoka, K., Kubo, Y., Yokota, S. 1978. Fault-Tolerant Computer System With Three Symmetric Computers. Proceeding of the IEEE, Vol. 66, No. 10, pp. 1160-1170. 12.Katsuki, D. 1978. Pluribus- An Operational Fault-Tolerant Multiprocessor. IEEE, Vol. 66, No. 10, pp. 1146-1159. 13.Kuehn, R. E. 1969. Computer Redundancy: Design, Performance and Future. IEEE Trans. On Reliabilty, Vol.R-18, No. 1, pp. 3-11. 14.Maison, F. P. 1971. The MECRA: A Self-Repairable Computer for Highly Reliable Process. IEEE Trans. Computers, Vol. C-20, No. 11, pp. 1382-1393. 15.Meraud, C. and Browaeys, F. 1976. "Automatic Rollback Techniques of the COPRA Computers" Proceeding 1976 International Symposium Fault-Tolerant Computing, Pitsburg, PA. 16.Pradhan, D. K. 1996. Fault-Tolerant Computer Svstem Design, Prentice Hall PTR. 17.Samedov R. and Temiz, M. 1999. "The Regular Features of the Faults in the Structure of the Computer Control Systems", 6th International Conference of the Control Problems for Safety of Complex Systems, IPU RAN, Moscow. 18.Samedov, R. 1999. "An Approach to the Support of the Fault-Tolerance of the Double Redundant Computer Control Systems", Second International Symposium on Mathematical & Computational