Journals / Mühendislik Bilimleri Dergisi / 2007 / Cilt: 13 - Sayı: 1

Effect of steel fiber on properties of concrete in compression and bending

Çelik liflerin beton basınç ve eğilme özelliklerine etkisi

Pages
23–30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, it was observed that the stress-strain in compression and flexure strength of concrete were increased by adding of fibers in the concrete.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, effect of steel fiber type and content on the mechanical properties of fiber concrete in bending and compression was investigated.
📊
Key Findings & Data:In the production of concrete series, four different aggregates which have in 22 mm max. diameter were used.
💡
Conclusion & Impact:As a result, it was observed that the stress-strain in compression and flexure strength of concrete were increased by adding of fibers in the concrete.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, effect of steel fiber type and content on the mechanical properties of fiber concrete in bending and compression was investigated. In the production of concrete series, four different aggregates which have in 22 mm max. diameter were used. Cement content and water/cement ratio were kept at 325 kg/m3 and 0.60, respectively. In mixes, totally ten different series were produced as in two different fiber types at 60 and 80 aspect ratio, and five different fiber contents at 0 (control), 15, 30, 45 and 60 kg/m3. For define to mechanical properties of fiber concretes in bending and compression, 0150 x 300 mm. cylindrical specimens and 100x100x350 mm. prismatic specimens were used. Stress-strain behavior in compression and flexure strength in bending were defined on the cylindrical and prismatic specimens, respectively. As a result, it was observed that the stress-strain in compression and flexure strength of concrete were increased by adding of fibers in the concrete.

Özet

Bu çalışmada, çelik lif katkılı betonlarda farklı lif tipi ve miktarının, basınç ve eğilme altındaki betonun mekanik özelikleri üzerindeki etkisi araştırılmıştır. Beton serilerinin üretiminde, en büyük tane çapı 22 mm olan dört farklı agrega kullanılmıştır. Çimento dozajı 325 kg/m3, su/çimento oranı 0.60 olarak sabit tutulmuştur. Karışımlarda narinlik oranları 60 ve 80 olan iki farklı lif tipinde ve 0 (kontrol), 15, 30, 45 ve 60 kg/m3 olarak 5 farklı lif içeriğinde olmak üzere toplam 10 farklı seri üretilmiştir. Lif katkılı betonların basınç ve eğilme altındaki mekanik özeliklerinin belirlenmesi amacıyla 0150 x 300 mm. boyutlarında silindir numuneler ile 100 x 100 x 350 mm. boyutlarında prizmatik numuneler kullanılmıştır. Silindir numuneler üzerinde basınç altında gerilme-şekil değiştirme davranışı, prizmatik numuneler üzerinde de eğilme dayanımları belirlenmiştir. Sonuç olarak betona ilave edilen lifler, betonun basınç altındaki gerilme-şekil değiştirme yeteneğini ve eğilme dayanımını arttırdığı gözlenmiştir.

🔖

Cite This Article

ÜNAL, O., UYGUNOĞLU, T., GENÇEL, O. (2007). Effect of steel fiber on properties of concrete in compression and bending. Mühendislik Bilimleri Dergisi, Cilt: 13 - Sayı: 1, 23–30. https://ajindex.com/articles/289128

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Altun, F., Özcan, D. M., Vekli, M. ve Karahan, O. 2004. "Çelik Lif Katkılı C20 Betonun Mekanik Özelliklerinin Deneysel Araştırılması", Afyon Kocatepe Üniversitesi,
  2. Fen Bilimleri Dergisi, Cilt-4, Sayı 1 -2, Ekim, Afyon. Anonim, 1992. TS 10513, "Çelik Teller - Beton Takviyesinde Kullanılan", TSE, Ankara, 1992. Anonymous, 1997. ACI 544.1R-96, State-of-the-Art Report on Fiber Reinforced Concrete, American Concrete Institute (ACI) Committee 544. Anonim, 2002a. TS EN 196-1, "Çimento Deney Metotları- Bölüm 1: Dayanım", TSE, Ankara. Anonim, 2002b. TS EN 197-2, "Çimento- Bölüm 2: Uygunluk Değerlendirmesi", TSE, Ankara. Anonim, 2002c. TS EN 12390-1, Beton - Sertleşmiş beton deneylen - Bölüm 1: Deney Numunesi ve Kalıplarının Şekil, Boyut ve Diğer Özellikleri, TSE, Ankara. Anonim, 2002d. TS EN 12390-5, Beton - Sertleşmiş Beton Deneyleri - Bölüm 5: Deney Numunelerinin Eğilme Dayanımının Tayini, TSE, Ankara.
  3. Bayasi, Z. and Soroushian, P. 1992. "Effect of Steel Fiber Reinforcement on Fresh Mix Properties of Concrete", Technical Paper, ACI Materials Journal, Vol. 89, No. 4, July-August. Ding, Y. and Kusterle, W. 2000. "Compressive Stress-Strain Relationship of Steel Fiber-Reinforced Concrete at Early Age", Cement and Concrete Research 30, 1573-1579.
  4. Ersoy, H. Y. 2003.
  5. Kompozit Malzeme, Literatür Yayınları,
  6. Mimarlık Dizisi, ISBN: 975-8431-47-1. Ezeldin A. S. and Balaguru P. N. 1992. "Nornıal-and High-Strength Fiber-Reinforced Concrete Under Compression", Mat. Civil Eng., (4) 415-427.
  7. Fanella, D. A. and Naaman A. E. 1985. "Stress-Strain Properties of Fiber Reinforced( Concrete in Compression" ACI, 82 (4), 475 - 483. ' Gencel, O. 2006. "Farklı Çelik Lif Tipi ve Miktarının Beton Özelliklerine Etkisi", Yüksek Lisans Tezi, Afyon Kocatepe Üniversitesi,
  8. Fen Bilimleri Enstitüsü, Afyonkarahisar. İçağa, Y., Ünal, O. ve Uygunoğlu, T. 2005. "Farklı Koşullarda Kür Edilmiş Lif Katkılı Betonların Donma Çözülme Etkisi Altında Fiziksel Ve Mekanik Özelliklerinin Araştırılması", Proje No: 042.TEF.02. Khaloo, A.R. and Afshari, M. 2005. "Flexural Behavior of Small Steel Fiber Reinforced Concrete Slabs", Cement and Concrete Composites 27, 141-149.
  9. Nataraja, M.C., Dhang, N. and Gupta, A.P. 1999. "Stress-Strain Curves for Steel-Fiber. Reinforced Concrete Under Compression", Cement and Concrete Composites 21, 383-390.
  10. Shah, S. P. and Rangan, B.V. 1971. "Fiber Reinforced Concrete Properties", ACI Journal, pp. 126-135,
  11. February. Song, P. S. and Hwang, S. 2004. "Mechanical Properties of High-Stren