Journals / Ormancılık Araştırma Dergisi / 2020 / Cilt: 7 - Sayı: 2

Odun lifi takviyeli polivinil asetat rijit köpüklerin üretimi

Manufacture of wood fiber reinforced polyvinyl acetate rigid foams

Pages
104–112
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Tüm test sonuçlarına göre PVAc bazlı rijit köpüğün umut verici sonuçlar sergilediği gözlenmiştir.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Bu çalışmada, dondur-kurut tekniği kullanılarak tasarlanmış ve üretilmiş rijit köpükler polivinil asetattan (PVAc), ağartılmış kraft hamurundan ve ağartılmamış kraft hamurundan yapılmıştır.
📊
Key Findings & Data:PVAc bazlı köpük farklı oranlarda kraft hamuru ile güçlendirilmiştir.
💡
Conclusion & Impact:Tüm test sonuçlarına göre PVAc bazlı rijit köpüğün umut verici sonuçlar sergilediği gözlenmiştir.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Bu çalışmada, dondur-kurut tekniği kullanılarak tasarlanmış ve üretilmiş rijit köpükler polivinil asetattan (PVAc), ağartılmış kraft hamurundan ve ağartılmamış kraft hamurundan yapılmıştır. Rijit köpük çevre dostu bir ürün olarak üretim aşamasında pentan veya hidrokloroflorokarbon içermemektedir. PVAc bazlı köpük farklı oranlarda kraft hamuru ile güçlendirilmiştir. Basınç, eğilme kuvvetleri, fiziksel ve morfolojik özellikleri gibi performans özellikleri ilgili standartlara göre incelenmiştir. Köpük yoğunlukları %17,65 varyasyon katsayısı (CV) ile 0,018 g/cm3 ve %2,33 CV ile 0,137 g/cm3 arasında değişmektedir. Basınç direnci %50,00 CV ile 0,001 N/mm2 ve %5,98 CV ile 0.03 N/mm2 arasında değişmektedir. Eğilme direnci ise %20,00 CV ile 0,005 N/mm2 ve %6,06 CV ile 0,11 N/mm2 arasında bulunmuştur. Optimum özellikler B-4’ten (PVAc/Ağartılmış Kraft hamuru 1/0.8) elde edilmiştir. Ağartılmış kraft hamur takviyesi, ağartılmamış kraft hamur takviyesine kıyasla köpük malzemenin performans özellikleri üzerinde daha iyi sonuçlar vermiştir. Tüm test sonuçlarına göre PVAc bazlı rijit köpüğün umut verici sonuçlar sergilediği gözlenmiştir.

Özet

In this work, rigid foams designed and manufactured using the freeze drying technique were made from polyvinyl acetate (PVAc), bleached kraft pulp and unbleached kraft pulp. The rigid foams designed as an environmentally-friendly product with no pentane or hydrochlorofluorocarbon included in the manufacturing process. The PVAc based foams were reinforced with different kraft pulp contents. Their performance properties such as compressive and flexural strength, physical and morphological properties were investigated according to relevant standards. The foam densities ranged from 0,017 g/cm3 with %17,65 coefficient of variation (CV) to 0,137 g/cm3 with %2,33 CV. The compression resistance was found between 0,001 N/mm2 with %50,00 CV and 0,03 N/mm2 with %5,98 CV. The flexural resistance was found between 0,005 N/mm2 with %20,00 CV and 0,11 N/mm2 with %6,06 CV. Optimum properties were observed at B-4 (PVAc/ Bleached Kraft pulp 1/0.8). Bleached kraft pulp reinforcement gave better results on performance characteristics of foam materials compared to unbleached kraft pulp reinforcement. Overall test results showed that the PVAc based rigid foams have promising results.

🔖

Cite This Article

ERGÜN, M. E., ÖZEN, E., YILDIRIM, N., DALKILIÇ, B. (2020). Odun lifi takviyeli polivinil asetat rijit köpüklerin üretimi. Ormancılık Araştırma Dergisi, Cilt: 7 - Sayı: 2, 104–112. https://ajindex.com/articles/288428

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Ahmadzadeh S, Nasirpour A, Keramat J, Hamdami N, Behzad T, Desobry S., 2015. Nanoporous cellulose nanocomposite foams as high insulated food packaging materials. Colloids and Surfaces A: Physicochemical and Engineering Aspects 468, 201–210.
  2. Amann, M., Minge, O., 2011. Biodegradability of Poly (vinyl acetate) and Related Polymers. Advances in Polymer Science 245, 137–172. ASTM C165, 2007. Standard test method for measuring compressive properties of thermal insulations. ASTM International, Geneva, Switzerland. ASTM C203, 2012. Standard test method for breaking load and flexural properties of block-type thermal insulation. ASTM International, Geneva, Switzerland. ASTM C303, 2010. Standard test method for dimensions and density of performed block and board-type thermal insulation. ASTM International, Geneva, Switzerland BWPA, 2019. What is Wood Pulp? https://www.bwpa. org.uk/wood-pulp/ (Last visited: 12.08.2019)
  3. Crowly J., Bell D., Kopp-Holtwiesche B., 2005. Environmentally-favorable erosion control with a polyvinyl acetatebased formulation. Quattro Environmental, Inc. Technical Report. Dash, R., Li, Y., Ragauskas, A. J., 2012. Cellulose nanowhisker foams by freeze casting. Carbohydrate polymers 88(2), 789-792.
  4. De Rodriguez, N. L. G., Thielemans, W., Dufresne, A., 2006. Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites. Cellulose 13(3), 261-270.
  5. Ek, M., Gellerstedt, G., Henriksson, G., 2009. Pulping chemistry and technology (Vol. 2). KTH Royal Institute of Technology, Walter de Gruyter, Stockholm. Geng, S., Haque, M. M.-U., Oksman, K., 2016. Crosslinked poly(vinyl acetate) (PVAc) reinforced with cellulose nanocrystals (CNC): Structure and mechanical properties. Composites Science and Technology 126, 35-42.
  6. Glenn, G. M., Irving, D. W., 1995. Starch-based microcellular foams. Cereal Chemistry 72(2), 155-161.
  7. Glenn, G. M., Orts, W. J., 2001. Properties of starchbased foam formed by compression/explosion processing. Industrial Crops and Products 13(2), 135-143.
  8. Glenn, G. M., Orts, W. J., Nobes, G. A. R., 2001. Starch, fiber and CaCO3 effects on the physical properties of foams made by a baking process. Industrial Crops and Products 14(3), 201-212.
  9. Gong, G., Mathew, A. P., Oksman, K., 2011a. Toughening effect of cellulose nanowhiskers on polyvinyl acetate: fracture toughness and viscoelastic analysis. Polymer Composites 32(10), 1492–1498.
  10. Gong, G., Pyo, J., Mathew, A. P., Oksman, K., 2011b. Tensile behavior, morphology and viscoelastic analysis o