At the end of the study, it is observed that the abrasive wear resistance of boron steel specimens increased with increasing hardness values of the test material.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, the abrasive wear behaviour of untreated and heat treated AISI (SAE) 15B35H and 15B41H boron steel specimens are experimentally investigated in the laboratory conditions and the wear results are compared with respect to their hardnesses.
📊
Key Findings & Data:In this study, the abrasive wear behaviour of untreated and heat treated AISI (SAE) 15B35H and 15B41H boron steel specimens are experimentally investigated in the laboratory conditions and the wear results are compared with respect to their hardnesses.
💡
Conclusion & Impact:At the end of the study, it is observed that the abrasive wear resistance of boron steel specimens increased with increasing hardness values of the test material.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
In this study, the abrasive wear behaviour of untreated and heat treated AISI (SAE) 15B35H and 15B41H boron steel specimens are experimentally investigated in the laboratory conditions and the wear results are compared with respect to their hardnesses. At the end of the study, it is observed that the abrasive wear resistance of boron steel specimens increased with increasing hardness values of the test material.
Özet
Bu çalışmada, AISI (SAE) 15B35H ve 15B41H işlemsiz ve ısıl işlemli borlu çelik numunelerin abrazif aşınma davranışları laboratuvar şartlarında deneysel olarak incelenmiş ve aşınma sonuçları sertlikleri açısından karşılaştırılmıştır. Çalışma sonunda, borlu çelik numunelerin abrazif aşınma dirençlerinin test malzemesinin artan sertlik değerleriyle arttığı gözlenmiştir.
🔖
Cite This Article
ER, Ü. (2004). BORLU ÇELİKLERİN ABRAZİF AŞINMA DAVRANIŞLARI. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 17 - Sayı: 2, 59–70. https://ajindex.com/articles/287552
A. Misra and I. Finnie, “A Review of the Abrasive Wear of Metals”, Journal of Engineering Materials and Technology, Vol.104, pp. 94-101, 1982
N.Y. Sarı, Ş.Y. Şirin, E. Kaluç ve K. Tülbentçi, “Makine Parçalarının Aşınmasına Karşı Modern Yüzey İşlemleri (1)”, Makine Magazin, Vol.14, 48-51, 1997
N.Y. Sarı ve E. Kaluç, “Endüstride Aşınma Problemleri”, Makine ve Metal Teknolojisi, Vol.50, 64-68, 1996
N. Axén and K.-H. Zum Gahr, “Abrasive Wear of TiC-Steel Composite Clad Layers on Tool Steel”, Wear, Vol.157, pp. 189-201, 1992
M.A. Moore, “A Review of Two-Body Abrasive Wear”, Wear, Vol.27, 1-17, 1974
P.L. Hurricks, “Some Metallurgical Factors Controlling the Adhesive and Abrasive Wear Resistance of Steels. A Review”, Wear, Vol.26, pp. 285-304, 1973
P.L. Hurricks, “Review Paper: Some Aspects of the Metallurgy and Wear Resistance of Surface Coatings”, Wear, Vol.22, 291-320, 1972
M.M. Khruschov, “Principles of Abrasive Wear”, Wear, Vol.28, pp. 69-88, 1974
I.M. Hutchings, “Wear by hard particles, Chapter 6, In: Tribology: Friction and Wear of Engineering Materials”, Edward Arnold Pub., London, 1992