SavedAdd your journal

Journals / Madencilik Dergisi / 2000 / Cilt: 39 - Sayı: 2

Controlled blasting techniques and the application of the T2 tunnel on the Tarsus crossing Gaziantep motorway

Kontrollü patlatma yöntemleri ve Tarsus ayrımı-Gaziantep otoyolu T2 tüneli uygulaması

Sair KAHRAMAN
Alaettin KILIÇ
Pages
11–22
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, less reinforcement and less concrete were needed and the cost was lowered.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, firstly, line drilling, smooth blasting and presplitting, which are known as controlled blasting techniques, are described in detail.
📊
Key Findings & Data:Then, the applications of line drilling and smooth blasting in the T2 tunnel on the Tarsus Crossing-Gaziantep Motorway are given as an example.
💡
Conclusion & Impact:As a result, less reinforcement and less concrete were needed and the cost was lowered.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, firstly, line drilling, smooth blasting and presplitting, which are known as controlled blasting techniques, are described in detail. Then, the applications of line drilling and smooth blasting in the T2 tunnel on the Tarsus Crossing-Gaziantep Motorway are given as an example. Fracturing beyond the excavation line and over breaking were minimised with a successful application of line drilling and smooth blasting in the T2 tunnel. As a result, less reinforcement and less concrete were needed and the cost was lowered.

Özet

Bu çalışmada, önce kontrollü patlatma yöntemleri olarak bilmen hat delme, son-kesme ve ön-kesme detaylı olarak anlatılmıştır. Sonra Tarsus Ayrımı-Gaziantep Otoyolu T2 tünelinde son-kesme ve hat delme uygulamaları örnek olarak verilmiştir. T2 tünelinde başarılı bir son-kesme ve hat delme uygulaması ile kazı hattı dışındaki kayaçta çatlamalar ve aşırı kazı en aza indirilmiştir. Bunun sonucunda tahkimat ve püskürtme beton kullanımı azaltılmış ve maliyet düşürülmüştür.

🔖

Cite This Article

KAHRAMAN, S., KILIÇ, A. (2000). Controlled blasting techniques and the application of the T2 tunnel on the Tarsus crossing Gaziantep motorway. Madencilik Dergisi, Cilt: 39 - Sayı: 2, 11–22. https://ajindex.com/articles/282274

References (6)

  1. Barton, N., Lien, R. ve Lunde, J., 1974; "Engineering Classification of Rock Masses for The Design of The Tunnel Support", Rock Mech.,6,s. 183-236.
  2. Bieniawski, Z.T., 1973; "Engineering Classification of Jointed Rock Masses", Trans. S. Afr. Ins. Civ. Eng., 15, s. 335-344
  3. Deere, D.U. ve Miller, R. P., 1964; "Engineering Classification and Index Properties for Intact Rock", Air Force Weapons Lab. Tech. Report, AFWL-TR 65-116,
  4. Kirtland Base, New Mexico. Duman, T.Y., 1993; "Tarsus Ayrımı -Adana- Gaziantep Otoyolu (TAG) Tünel 2-Tünel 4 Arasının Mühendislik Jeolojisi", Y. Lisans Tezi. ÇÜ. Fen. Bil. Enst., Adana, 173 s. Erkoç, Ö.Y., 1990; "Kaya Patlatma Tekniği", 164s. Gustafsson, R., 1973; "Swedish Blasting Technique", 323s. Konya, C.J. ve Walter, E.J., 1990; "Surface Blast Design", 293s. Lauffer, H., 1958; "Gebirgsklassifizierung Fürden Stollenbau", Geol., Bauwesen 74, s. 46- 51. Naapuri, J., 1990; "Surface Drilling and Blasting", Tamrock, 472s. Olofson, S.O., 1988; "Applied Explosive Technology for Construction and Mining", 302s. Steiner, W. ve Einstein, H.H., 1980; "Improved Design of Tunnel Supports". Empirical methods in Rock Tunnelling-Reviewed Recommendations, "U.S. Dept. of Transportation Report, Cilt 5, Sayı: UMTA-MA-06-0100-80-8,
  5. Washington D.C., Haziran. Tekfen, 1996; Tekfen İnşaat ve Tesisat A.Ş. Terzaghi, K., 1946; "Rock Defects and Loads on Tunnel Support", Rock Tunnelling with Steel Support, ed. R.V. Proctor ve T. Withe. Commercial Shearing Co., Youngstown, OH, s. 15-99.
  6. Wickham, G.E., Tiedemann, H.R. ve Scinner. E.H., 1972; "Support Determination Based on Geologic Predictions", Proc. Rapid Excav. Tunnelling Conf., AIME, New York, s. 43- 64. Yılmazer, İ., Ertunç, A. ve Erhan, F., 1992; "Engineering Geology of the Düziçi- Kömürler Region", 1st Int. Symp. Eastern Mediterranean Geology, Çukurova Üniversitesi Adana, s.77-89. Yılmazer, i., 1995; "Significance of Discontinuity Surveying in Motorway Alingment Selection, Southern Turkey", Engineering Geology, Cilt 40, s. 41-48.