Journals / Madencilik Dergisi / 2005 / Cilt: 44 - Sayı: 2

A comparison of domestic iron ore and import iron ore used in blast furnace and sinter

Yüksek fırın ve sinter de kullanılan yerli demir cevherleri ile ithal demir cevherlerinin karşılaştırılması

Pages
37–43
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Moreover in this study, according to comparison parameters and integrated plants changes, to increase the amount and usage of domestic iron ores in blast furnace is given as an advice.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, chemical, physcial and metalurgical properties of some domestic iron ore are compared with the import iron ore properties.
📊
Key Findings & Data:After this comparison, it’s seen that the chemical and physical properties of the domestic iron ore must be improved.
💡
Conclusion & Impact:Moreover in this study, according to comparison parameters and integrated plants changes, to increase the amount and usage of domestic iron ores in blast furnace is given as an advice.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, chemical, physcial and metalurgical properties of some domestic iron ore are compared with the import iron ore properties. After this comparison, it’s seen that the chemical and physical properties of the domestic iron ore must be improved. The metalurgical properties of both ores seems to be same. Moreover in this study, according to comparison parameters and integrated plants changes, to increase the amount and usage of domestic iron ores in blast furnace is given as an advice.

Özet

Bu çalışmada, bir kısım yerli cevherin kimyasal, fiziksel ve metalurjik özellikleri, ithal edilen cevherlerin bu özellikleri ile karşılaştırılmıştır. Karşılaştırma sonunda yerli cevherlerin kimyasal ve fiziksel özelliklerinin iyileştirmesi gerektiği gözlenmiştir. Metalurjik özellikler açısından ise yerli parça cevherlerin, ithal cevherlerle rekabet edecek değerlerde olduğu görülmüştür. Ayrıca bu çalışmada karşılaştırma sonuçlarına ve entegre tesislerdeki gözlenen değişikliklere bağlı olarak, yerli cevherlerin yüksek fırında kullanım miktarını artırabilmek için çeşitli önerilerde bulunulmuştur.

🔖

Cite This Article

ERÜNSAL, E. (2005). A comparison of domestic iron ore and import iron ore used in blast furnace and sinter. Madencilik Dergisi, Cilt: 44 - Sayı: 2, 37–43. https://ajindex.com/articles/282258

References (3)

  1. Acarkan, N., Önal, G., 1999; “TDÇİ Malatya- Hekimhan Hasançelebi Cevher Yatağının Yeniden Değerlendirilmesi “ Nihai Rapor. Anon,2005 “ U.S Geological Survey, Mineral Commodity Summaries” http://minerals.usgs.gov./minerals/ Chao,J.,T, Cook., J. Gran,A.E.,1989; “ The Practice of Ilmenite Application In the BF A Technical and Economical Review” ICP,383-390.
  2. Chevailler, A., Roth,J,L., Metz, B., Jusseau,N., Steiler,J,M.; 1989; “Hot Metal Quality For Optimum Blast Furnace- Convertor Operation. IMP 311-318.
  3. Erhan, A., 2004; 6 Eylül. Dünya. Ekonomi-Politika. Kortman, A., Lüngen, H, Ritz, J. Wolker., 1992; “ Quality Requirements For Burden Materials and Testing Method Used In Germany” Ironmaking Conference Proceeding. 195-203.