Journals / Bilimsel Madencilik Dergisi / 2026 / Cilt: 44 Sayı: 2

A Comparison of Domestic Iron Ore and Import Iron Ore Used in Blast Furnace and Sinter

YÜKSEK FIRIN VE SİNTER DE KULLANILAN YERLİ DEMİR CEVHERLERİ İLE İTHAL DEMİR CEVHERLERİNİN KARŞILAŞTIRILMASI

Pages
37–43
Publication Date
2005-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Moreover in this study, according to comparison parameters and integrated plants changes, to increase the amount and usage of domestic iron ores in blast furnace is given as an advice.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, chemical, physcial and metalurgical properties of some domestic iron ore are compared with the import iron ore properties.
📊
Key Findings & Data:After this comparison, it’s seen that the chemical and physical properties of the domestic iron ore must be improved.
💡
Conclusion & Impact:Moreover in this study, according to comparison parameters and integrated plants changes, to increase the amount and usage of domestic iron ores in blast furnace is given as an advice.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Yerli Cevher · İthal Cevher · Yüksek Fırın

Abstract

In this study, chemical, physcial and metalurgical properties of some domestic iron ore are compared with the import iron ore properties. After this comparison, it’s seen that the chemical and physical properties of the domestic iron ore must be improved. The metalurgical properties of both ores seems to be same. Moreover in this study, according to comparison parameters and integrated plants changes, to increase the amount and usage of domestic iron ores in blast furnace is given as an advice.

Özet

Bu çalışmada, bir kısım yerli cevherin kimyasal, fiziksel ve metalurjik özellikleri, ithal edilen cevherlerin bu özellikleri ile karşılaştırılmıştır. Karşılaştırma sonunda yerli cevherlerin kimyasal ve fiziksel özelliklerinin iyileştirmesi gerektiği gözlenmiştir. Metalurjik özellikler açısından ise yerli parça cevherlerin, ithal cevherlerle rekabet edecek değerlerde olduğu görülmüştür. Ayrıca bu çalışmada karşılaştırma sonuçlarına ve entegre tesislerdeki gözlenen değişikliklere bağlı olarak, yerli cevherlerin yüksek fırında kullanım miktarını artırabilmek için çeşitli önerilerde bulunulmuştur

🔖

Cite This Article

Erünsal, E. (2005). A Comparison of Domestic Iron Ore and Import Iron Ore Used in Blast Furnace and Sinter. Bilimsel Madencilik Dergisi, Cilt: 44 Sayı: 2, 37–43. https://ajindex.com/articles/1126003

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...