SavedAdd your journal

Journals / Makine Teknolojileri Elektronik Dergisi (elektronik) / 2015 / Cilt: 12 - Sayı: 2

Determination of Displacements on Tool Holder in Ultrasonic and Conventional Cylindrical Turning Processes

Ultrasonik ve Geleneksel Silindirik Tornalama İşlemlerinde Takım Tutucu Üzerindeki Yer Değiştirmenin Belirlenmesi

İsmail UCUN
İBRAHİM PAZARKAYA
Pages
65–74
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results shows that the displacement values occurred in ultrasonic turning process is very low in compared with conventional method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, displacements occurred on tool holder in ultrasonic and conventional turning processes have been determined as experimental.
📊
Key Findings & Data:Cutting parameters such as depth of cut, feed rate and cutting speed has been considered in the experiments.
💡
Conclusion & Impact:The results shows that the displacement values occurred in ultrasonic turning process is very low in compared with conventional method.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, displacements occurred on tool holder in ultrasonic and conventional turning processes have been determined as experimental. Cutting parameters such as depth of cut, feed rate and cutting speed has been considered in the experiments. AISI 310 stainless steel was used in the experiments. The displacements was measured by using KEYENCE laser apparatus attached on conventional turning machine. In addition, the ultrasonic system was attached on a conventional turning machine. Working frequency of the ultrasonic system is 20 kHz and also amplitude is almost 15-20 µm. The results shows that the displacement values occurred in ultrasonic turning process is very low in compared with conventional method. The tool holder is a more stable behavior in the turning processes by using ultrasonic.

Özet

Bu çalışmada, ultrasonik ve geleneksel tornalama işlemlerinde takım tutucuda (kater) meydana gelen yer değiştirmeler deneysel olarak incelenmiştir. Deneysel çalışmada kesme hızı, ilerleme ve kesme derinliği gibi kesme parametreleri dikkate alınmıştır. Deneylerde AISI 310 paslanmaz çelik kullanılmıştır. Yer değiştirmeler torna tezgâhı tablası üzerine bağlanan KEYENCE lazer cihazı ile ölçülmüştür. Ultrasonik sistem ise üniversal bir torna tezgâhı üzerine bağlanmıştır. Ultrasonik sistemin çalışma frekansı 20 kHz ve genliği ise 15-20 µm civarındadır. Çalışma sonuçları göstermiştir ki, ultrasonik ile yapılan tornalama işlemindeki yer değiştirme değerleri geleneksel yönteme göre daha düşük elde edilmiştir. Ultrasonik ile yapılan tornalama işlemlerinde kater daha stabil bir davranış göstermiştir.

🔖

Cite This Article

UCUN, İ., PAZARKAYA, İ. (2015). Determination of Displacements on Tool Holder in Ultrasonic and Conventional Cylindrical Turning Processes. Makine Teknolojileri Elektronik Dergisi (elektronik), Cilt: 12 - Sayı: 2, 65–74. https://ajindex.com/articles/281985

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Liao, Y.S., Chen Y.C. and Lin H.M., 2007, “Feasibility Study of the Ultrasonic Vibration Assisted Drilling of Inconel Superalloy”, Int. J. Machine Tools and Manufacture, 47, 1988-1996
  2. Zhou, M., Eow, Y.T., Ngoi, B.G.A. and Lim, E.N., 2003, “Vibration-Assisted Precision Machining of Steel with PCD Tools”, Materials and Manufacturing Proc., 18, 5, 825–834
  3. Shen X.H., Zhang J., Xing D.X., Zhao Y., 2012, “A Study of Surface Roughness Variation in Ultrasonic Vibration-Assisted Milling”, Int. J. of Advanced Manuf. Tech., 58 (5), 553-561
  4. Nath, C., Rahman, M. and Neo, K.S., 2009 “A Study on the Effect of Tool Nose Radius in Ultrasonic Elliptical Vibration Cutting of Tungsten Carbide”, J. Mat. Processing Tech., 209, 5830–5836
  5. Nath, C., Rahman, M. and Andrew S.S.K., 2007, “A Study on Ultrasonic Vibration Cutting of Low Alloy Steel”, J. Mat. Processing Tech., 192–193, 159–165
  6. Dinakaran D., Sampathkumar S., Sivashanmugam N., 2009, “An Experimental Investigation on Monitoring of Crater Wear in Turning Using Ultrasonic Technique”, Int. J. Machine Tools and Manufacture 49 (15), 1234-1237
  7. Ahmed, N., Mitrofanov, A.V. Babitsky, V.I. and Silberschmidt, V.V. 2007, “Analysis of Forces in Ultrasonically Assisted Turning”, Journal of Sound and Vibration, 308, 845–854
  8. Ahmed, N., Mitrofanov, A.V. Babitsky, V.I. and Silberschmidt, V.V. 2006, “Analysis of Material Response to Ultrasonic Vibration Loading in Turning Inconel 718, Mat. Sci. And Engineering A, 424, 318-325
  9. Pujana J., Rivero A., Celaya A., Lopez L.N., 2009, “Analysis of Ultrasonic-Assisted Drilling of Ti6Al4V”, Int J of Machine and Tools and Manufacture, 49, 500-508
  10. Celaya, A., Norberto López de Lacalle L., Javier Campa F. and Aitzol Lamikiz, 2010, “Ultrasonic Assisted Turning of Mild Steels”, Int. J. Materials and Product Technology, 37, 1/2
  11. Azarhoushang, B. and Akbari, J., 2007, “Ultrasonic-assisted Drilling of Inconel 738-LC”, Int. J. Machine Tools and Manufacture 47, 1027–1033
  12. Babitsky, V.I., Kalashnikov, A.N. and Molodtsov F.V., 2004, “Autoresonant Control of Ultrasonically Assisted Cutting”, Mechatronics, 14, 91–114
  13. Pazarkaya, İ., 2013, “Silindirik Tornalama İçin Ultrasonik Sistem Tasarımı ve İmalatı”, Afyon Kocatepe Üniversitesi, Yüksek Lisans Tezi, Afyonkarahisar
  14. Ucun İ., Pazarkaya İ., 2015, “Silindirik Tornalama İşlemi İçin Yeni Bir Ultrasonik Sistem Tasarımı ve İmalatı”, Teknolojik Araştırmalar: Makine Tek. Elektronik Dergisi, 15(1), 13-23
  15. Mitrofano