Modifications applied on the electrical discharge machine, workpiece and electrode to improve performance outputs in EDM and the experimental results of which were presented as a summary
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, experimental studies related to electric discharge machining (EDM) over the period since the beginning of using this process as a nontraditional manufacturing process were investigated.
📊
Key Findings & Data:In this study, experimental studies related to electric discharge machining (EDM) over the period since the beginning of using this process as a nontraditional manufacturing process were investigated.
💡
Conclusion & Impact:Modifications applied on the electrical discharge machine, workpiece and electrode to improve performance outputs in EDM and the experimental results of which were presented as a summary
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
In this study, experimental studies related to electric discharge machining (EDM) over the period since the beginning of using this process as a nontraditional manufacturing process were investigated. Modifications applied on the electrical discharge machine, workpiece and electrode to improve performance outputs in EDM and the experimental results of which were presented as a summary
Özet
Bu çalışmada, Elektro-Erozyon İle İşleme (EEİ) tekniğinin alışılmamış imalat yöntemlerinden biri olarak kullanılmaya başlamasından günümüze kadar geçen sürede bu teknik ile ilgili yapılmış olan deneysel çalışmalar incelenmiştir. EEİ ile işlemenin performans çıktılarını iyileştirmek amacı ile tezgah, işparçası ve elektrot üzerinde uygulanmış modifikasyonlar ve bunlara ait deneysel sonuçlar özet olarak sunulmuştur
🔖
Cite This Article
ÖZGEDİK, A. (2013). Modifications Applied on Electrical Discharge Machine, Workpiece and Electrode in Electric Discharge Machining. Makine Teknolojileri Elektronik Dergisi (elektronik), Cilt: 11 - Sayı: 2, 19–38. https://ajindex.com/articles/281972
Pandey, P.C., Shan, H.S., 1980, "Modern Machining Processes", Tata McGraw Hill Publishing Company Limited, New Delhi, 84-114. 2. McGeough, J.A., 1988, "Advanced Methods of Machining", Chapman and Hall, London New York, 128-147. 3. Springborn, R.K., 1967, "Non-Traditional Machining Processes", American Society of Tool and Manufacturing Engineers, Dearborn Michigan, 105-133
Saito, K., Kishinami, T., Konno, H., Sato, M., 1986, "Development of numerical contouring control electric discharge machining (NCC-EDM)", Annals of the CIRP, 35 (1): 117-120. 8. Chen, S.L., Yan, B.H., Huang, F.Y., 1999, "Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti-6Al-4V", Journal of Materials Processing Technology, 87 (1-3): 107-111. 9. Bayramoğlu, M., 1995, "Dalma elektro erozyon tezgahları ve nümerik kontrol", Makina ve Metal Teknolojisi, 45: 157-160.
Masuzawa, T., Heuvelman, C.J., 1983, "A self flushing method with spark erosion machining", Annals of the CIRP, 32 (1): 109-111.
Bayramoğlu, M., 1995, "Elektro erozyon tezgahlarında işlenen parçaların yüzey kalitesi", 6. Denizli Malzeme Sempozyumu320-326, Denizli. Kruth, J.-P., Stevens, L., Froyen, L., Lauwers, B., 1995, "Study of the white layer of a surface machined by die-sinking electro-discharge machining", Annals of the CIRP, 44 (1): 169-172.
Çoğun, C., 1990, "Keeping electric discharge machining under control", Machine Design, 62 (8): 105-108.
Schumacher, B. M., 1990, "About the role of debris in the gap during electrical discharge machining", Annals of the CIRP, 39 (1): 197-199.
Özgedik, A., Çogun, C., 2006, An experimental investigation of tool wear in electric discharge machining, The International Journal of Advanced Manufacturing Technology, 27 (5-6): 488-500.
Mohan, B., Rajadurai, A., Satyanarayana, K.G., 2002, "Effect of SiC and rotation of electrode on electric discharge machining of Al Processing Technology, 124 (3): 297-304. -SiC composite", Journal of Materials Yu, Z., Jun, T., Masanori, K., 2004, "Dry electrical discharge machining of cemented carbide", Journal of Materials Processing Technology, 149 (1-3): 353-357.
Guu, Y.H., Hocheng, H., 2001, "Effects of workpiece rotation on machinability during electrical-discharge machining", Materials and Manufacturing Processes, 16 (1): 91-101.
Kunieda, M., Yoshida, M., Taniguchi, N., 1997, "Electrical discharge machining in gas", Annals of the CIRP, 46 (1): 143-146.