Journals / Makine Teknolojileri Elektronik Dergisi (elektronik) / 2013 / Cilt: 11 - Sayı: 2

Optimal Design of Cylindrical Slotted Electromagnetic Damper

Silindirik Slotlu Elektromanyetik Sönümleyicinin Optimal Tasarımı

Pages
11–18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Then two-dimensional axisymmetric Finite Element analysis is performed and the results are compared

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays viscous dampers are used to prevent undesired vibrations in the machines.
📊
Key Findings & Data:It is possible that this energy can be regenerated by using a suitable electric machinery and power converter topology.
💡
Conclusion & Impact:Then two-dimensional axisymmetric Finite Element analysis is performed and the results are compared
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Nowadays viscous dampers are used to prevent undesired vibrations in the machines. These passive elements, convert mechanical energy into heat energy by fluid motion and the heat is dissipated. It is possible that this energy can be regenerated by using a suitable electric machinery and power converter topology. By means of this electromagnetic system, the mechanical energy due to undesired vibrations can be converted into electrical energy and can be utilized later, In this study a slotted tubular electromagnetic magnetic damper was designed. The effect of winding slot width and permanent magnet width on the system performance is analyzed and optimized. For this purpose a twodimensional parametric geometry of the system is created using MATLAB and COMSOL. Then two-dimensional axisymmetric Finite Element analysis is performed and the results are compared

Özet

Günümüzde pek çok makinada istenmeyen titreşimlerin önlenmesi için vizkoz sönümleyiciler kullanılmaktadır. Bu pasif elemanlar, titreşime sebep olan mekanik enerjiyi içerisindeki akışkanın hareketi yardımıyla ısı enerjisine dönüştürerek dışarı atmaktadırlar. Uygun bir elektrik makinesi ve güç elektroniği topolojisi kullanarak gerçekleştirilecek bir aktif sönümleyiciler ile bu enerjinin geri kazanımı mümkün hale gelmektedir. Böylece kayıp olarak dışarıya atılan ısı ileride kullanılmak üzere elektrik enerjisi olarak depolanabilmektedir. Bu çalışmada slotlu tübüler yapıda bir elektromanyetik sönümleyici tasarlanmıştır. Sargı slot genişliği ile kalıcı mıknatıs boyutunun sistem performansına etkisi incelenmiş ve optimize edilmeye çalışılmıştır. Bu amaçla öncelikle sistemin iki boyutlu geometrisi oluşturulmuş ve COMSOL ile MATLAB yazılımları birlikte kullanılarak sistemdeki geometrik boyutlar parametrik hale getirilmiştir. Daha sonra iki boyutlu eksenel simetrik sonlu elemanlar analizleri gerçekleştirilmiş ve sonuçlar karşılaştırılmıştır

🔖

Cite This Article

BALTACI, A., BOZTEPE, M., OĞUZ, G., SABANCI, S., SARIKANAT, M. (2013). Optimal Design of Cylindrical Slotted Electromagnetic Damper. Makine Teknolojileri Elektronik Dergisi (elektronik), Cilt: 11 - Sayı: 2, 11–18. https://ajindex.com/articles/281971

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Fodor, M.G., Redfield, R., 1993. The Variable Linear Transmission for Regenerative Damping in Vehicle Suspension Control. Vehicle System Dynamics 22, 1-20.
  2. Suda Y, Shiiba T, Hio K, et al., "Study on Electromagnetic Damper for Automobiles with Nonlinear Damping Force Characteristics (Road Test and Theoretical Analysis)", Vehicle System Dynamics, 2004, 41(Sup. ), pp.637-646.
  3. Kawamoto, Y., Suda, Y., Inoue, H., Kondo, T., 2007. Modeling of Electromagnetic Damper for Automobile Suspension. Journal of System Design and Dynamics 1, 524-535.
  4. Nagem, R., 1997. AN Electromechanıcal Vıbratıon Absorber. Journal of Sound and Vibration 200, 551-556.
  5. Nerves, A.C., 1996. Regenerative Electric Actuators for Active Control of Civil Structures. Virginia Polytechnic Institute and State University. Scruggs, J., 1999. Active, regenerative control of civil structures. Moses, A.J., Al-Naemi, F., Hall, J., 2003. Designing and prototyping for production. Practical applications of electromagnetic modelling. Journal of magnetism and magnetic materials 254, 228-233.
  6. Markovic, M., Jufer, M., Perriard, Y., 2004. Analyzing an electromechanical actuator by Schwarz-Christoffel mapping. IEEE Transactions on Magnetics 40, 1858-1863.
  7. Encica, L., Echeverría, D., Lomonova, E.A., Vandenput, A.J.A., Hemker, P.W., Lahaye, D., 2006. Efficient optimal design of electromagnetic actuators using space mapping. Structural and Multidisciplinary Optimization 33, 481-491.
  8. Milanesi, F., 2009. Design optimization and control strategies for PM Multiphase Tubular Linear Actuators. Gomis-Bellmunt, O., Galceran-Arellano, S., Sudrià-Andreu, A., Montesinos-Miracle, D., Campanile, L.F., 2007. Linear electromagnetic actuator modeling for optimization of mechatronic and adaptronic systems. Mechatronics 17, 153-163.
  9. Gomis-Bellmunt, O., Galceran-Arellano, S., Sudrià-Andreu, A., Montesinos-Miracle, D., Campanile, L.F., 2007. Linear electromagnetic actuator modeling for optimization of mechatronic and adaptronic systems. Mechatronics 17, 153-163.