Journals / Mathematical and Computational Applications / 1996 / Cilt: 1 - Sayı: 1

Torsional stresses the transverse fillet weld tubular joints

Pages
29–35
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Changing the torsional stresses, along the weld legs and the weld throat, are plotted in dhnensionless coordinates.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Torsional stresses, Tr6 and tei, in the transverse fillet tubular weld joint subjected to torsional load have been analyzed by the finite element method using triangular and quadrilateral izoparametric arisymmetric fourier type torus finite elements.
📊
Key Findings & Data:There is an »»symmetry with respect to geometry and material properties but no arisymmetry with respect to the loading.
💡
Conclusion & Impact:Changing the torsional stresses, along the weld legs and the weld throat, are plotted in dhnensionless coordinates.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Torsional stresses, Tr6 and tei, in the transverse fillet tubular weld joint subjected to torsional load have been analyzed by the finite element method using triangular and quadrilateral izoparametric arisymmetric fourier type torus finite elements. There is an »»symmetry with respect to geometry and material properties but no arisymmetry with respect to the loading. With respect to material properties, two kinds of joints are considered in the study. One consists of steel tubes and steel weld material, the other steel tubes and brass weld material. All of the materials used are assumed linear-elastic. Changing the torsional stresses, along the weld legs and the weld throat, are plotted in dhnensionless coordinates.

🔖

Cite This Article

GÜNAY, D., AYDEMİR, A., ÖZER, H. (1996). Torsional stresses the transverse fillet weld tubular joints. Mathematical and Computational Applications, Cilt: 1 - Sayı: 1, 29–35. https://ajindex.com/articles/280240

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Adams,R. D. ve Peppiatt,N. A, Stressanalysisofadhesivebondedtubularlapjoint,J. Adhesion,Vol.9, pp.1-18,1977
  2. Blodgett,O. W.,Allowablesenablecostreductionsandtheuseof advancedtechnologiesin thedesignof structuresandweldments,WeldingJournal,pp.619-638,August1970
  3. Chandrupatla,T. R andBelegundu,A D., Introductionto FiniteElementsin Engineering,Prentice-HallInternational,Inc.,1991
  4. Chon,C. T., Analysisof tubularlapjointsin torsion,J.CompositeMaterials,Vol.16, pp.268-284,July,1982
  5. Graves,R S. andAdams,D. F., Analysisof a bondedjointin a compositetubesubjectedto torsion,J. CompositeMaterials,Vol.15, pp.211,:r••. 1ay1981
  6. Gurney,T. R, Somefiniteelementstressanalysisof simulateddiffusion-bondedlapjoints,J. StrainAnalysis,Vol.12, No.4,pp.331-338,1977
  7. Giinay,D.,Aydemir,A andKaya,A,Tekbindirmek6§ekaynakbaglantlSmdagerilmeanalizi,6.DenizliMalzemeSempozyumu,Denizli,1995
  8. Giinay,D.,TekeliogIu,M. andAydemirA, Ufgenkesitlihalkasonluelemanmdirengenlikmatrisiifinbiryontem,PamukkaleUniversityEngineeringCollege,J. EngineeringSciences,Vol.2, No.4,pp.61-67,1996
  9. Higgins,T.RandPreece,F. R, Proposedworkingstressesforfilletweldsin buildingconstruction,WeldingResearchSupplement,pp.429-432,1968
  10. Sayman,O.andDemir,H.,Burulmayamaruzkompozitmillerdekesitgeometrisiningerilmeylgllmasznaetkisi,VI.UlusalMekanikKongresi,pp.604-615,1989,Kirazhyayla-tstanbul
  11. Tekelioglu,M.,Cerid,M. andGanay,D., Bindirmek6§ekaynaglbaglantlSmdagerilmedagllzmznmincelenmesi,5. UlusalMakinaTasanmKongresi,pp.441-449,16-18Ey1Ul1992,ODTU-Ankara
  12. Tsui,T.- Y., Finiteelementstressanalysisof axisymmetricbodiesundertorsion,AIAAJournal,Vol.17, No.4,April1979