Considering the friction weld of engineering materials with the same thermophysical properties, the effects of external jet velocity of shielding inert gas and other friction welding parameters on the temperature distribution are discussed.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:The transient three dimensional temperature distribution in a continuous drive friction welding process of two concentric cylindrical bars is investigated numerically.
📊
Key Findings & Data:A finite difference technique is used to obtain the solution for the above problem within a desired accuracy.
💡
Conclusion & Impact:Considering the friction weld of engineering materials with the same thermophysical properties, the effects of external jet velocity of shielding inert gas and other friction welding parameters on the temperature distribution are discussed.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
The transient three dimensional temperature distribution in a continuous drive friction welding process of two concentric cylindrical bars is investigated numerically. A finite difference technique is used to obtain the solution for the above problem within a desired accuracy. Considering the friction weld of engineering materials with the same thermophysical properties, the effects of external jet velocity of shielding inert gas and other friction welding parameters on the temperature distribution are discussed.
🔖
Cite This Article
ŞAHİN, A. Z. (1996). A 3D numerical study of heat conduction in friction welding process. Mathematical and Computational Applications, Cilt: 1 - Sayı: 2, 111–116. https://ajindex.com/articles/280234
Eberhard, B.J., Schaaf, B.W. and Wilson, A.D., "Friction weld ductility and toughness as inflienced by inclusion morphology", Welding Journal, July, pp. 1718-178s,1983
Benn, B., "Friction welding of butt joints for high duty applications", Welding and Metal Fabrication, August/September, pp. 284-286, 1988
Yilbas, B.S., Sahin, A.Z., Kahraman, N. and AI-Garni, A.Z., "Friction welding of Steel-AI and Al-Cu materials", Journal of Materials Processing Tecnology, vol. 49, pp. 431-443, 1995
Craine, R.E., and Francis, A., "Frictional heat generated in the early stages of an orbital friction welding process", Wear, Vol. 114, pp. 355-365, 1987
Stokes, V.K., "Analysis of the friction (spin) welding process for thermoplastics", J. of Materials Science, Vol. 23, pp. 2772-2785, 1988
Yilbas, B.S., Sahin, A.Z., Coban, A., and Abdulaleem, B.J., "Investigation into properties of friction welding of aluminum bars", Journal of Materials Processing Technology, Journal Special Volume-AMPT'93, vol. 54, no. 1-4, pp. 76-81, 1995
Sluzalec, A., and Sluzalec, A.,"Solutions of thermal problems in friction welding - comparative study", Int. J. Heat Mass Transfer, vol. 36, no. 6. pp. 1583-1587, 1993
Şahin, A.Z., Yilbas, B.S., and AI-Garni, A.Z., "Friction welding of AI-AI, AI-Steel, and SteelSteel samples", J. of Materials Engineering and Performance, vol. 5, no. 1, pp. 89-99, 1996
Kreith, F., and Bohn, M.S., "Principles of Heat Transfer", West Publ. Co., New York, 1993
Chiou, C.C., and Lee, S.L., "Forced convection on a rotating cylinder with an incident air jet", Int. J. Heat Mass Transfer, vol. 36, no. 15, pp. 3841-3850, 1993.