SavedAdd your journal

Journals / Acta Odontologica Turcica / 2015 / Cilt: 32 - Sayı: 1

The effect of the veneering procedures on the biaxial flexural strength of partially- and fully-stabilized zirconia core materials

Üst yapı porseleni uygulamasının yarı ve tam sinterize zirkonya alt yapıların bükülme dayanıklılıklarına etkisi

Melek KAVASOĞLU
Cihan AKÇABOY
Pages
12–18
Publication Date
2015-02-09
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The mean biaxial flexural strength values of the control and the veneering group were not significantly different (p=0.211).CONCLUSION: When comparing the mean biaxial flexural strength values of all groups, the greatest values were found in the fully-sinterized and veneered group and the lowest values were found in the partially-sinterized and heat-treated group.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:OBJECTIVE: The purpose of this study was to evaluate the effect of heat treatment and veneering procedures on the biaxial flexural strength of partially- and fully-sinterized zirconia core materials.MATERIALS AND METHOD: Disc-shaped specimens (n=54;15 mm in diameter and 1 mm in thickness) were prepared from fully- and partially-stabilized zirconia blocks by using computer-aided design and computer-aided manufacturing (CAD/CAM) technology.
📊
Key Findings & Data:The discs were divided randomly into 6 groups, each comprising 9 samples.
💡
Conclusion & Impact:The mean biaxial flexural strength values of the control and the veneering group were not significantly different (p=0.211).CONCLUSION: When comparing the mean biaxial flexural strength values of all groups, the greatest values were found in the fully-sinterized and veneered group and the lowest values were found in the partially-sinterized and heat-treated group.
🔬Design:Research Article
📍Scope:9 samples
⚙️Variables:Dental Porselen · Seramikler · Yttria Stabilize Dörtgen Zirkon

Abstract

OBJECTIVE: The purpose of this study was to evaluate the effect of heat treatment and veneering procedures on the biaxial flexural strength of partially- and fully-sinterized zirconia core materials.MATERIALS AND METHOD: Disc-shaped specimens (n=54;15 mm in diameter and 1 mm in thickness) were prepared from fully- and partially-stabilized zirconia blocks by using computer-aided design and computer-aided manufacturing (CAD/CAM) technology. The discs were divided randomly into 6 groups, each comprising 9 samples. The groups were established as the control group, heat-treated group and veneering group. Biaxial flexural strength (piston on three balls) was determined for all specimens. The data were analyzed by using one-way ANOVA (analysis of variance) test.RESULTS: In partially-stabilized zirconia specimens, differences between the mean biaxial flexural strength values of the control and the heat-treated group, and control and the veneering group were not statistically significant (p=0.227 and p=0.351, respectively). For fully-stabilized zirconia specimens, the biaxial flexural strength values were significantly lower in the heat-treated group compared with the control and the veneering group (p=0.022 and p<0.001, respectively). The mean biaxial flexural strength values of the control and the veneering group were not significantly different (p=0.211).CONCLUSION: When comparing the mean biaxial flexural strength values of all groups, the greatest values were found in the fully-sinterized and veneered group and the lowest values were found in the partially-sinterized and heat-treated group.

Özet

AMAÇ: Bu çalışmanın amacı, ısı işlemi ve üst yapı porseleni uygulamasının yarı ve tam sinterize zirkonya alt yapıların bükülme dayanıklılıklarına etkisinin incelenmesidir. GEREÇ VE YÖNTEM: Yarı ve tam sinterize bloklardan 15 mm çapında ve 1 mm kalınlığında 54 adet disk şeklindeki örnek bilgisayar destekli tasarım ve üretim tekniği (CAD/CAM) kullanılarak hazırlandı. Gruplar uygulanan işlemlere göre, kontrol grubu, ısı uygulanmış grup ve üst yapı porseleni uygulanmış grup olarak ayrıldı (n=9). Tüm örneklere iki-eksenli bükülme dayanıklılığı testi (üç top üzerinde piston) uygulandı. Veriler tek yönlü varyans analizi yöntemi ile değerlendirildi. BULGULAR: Yarı sinterize zirkonya örneklerde kontrol grubu ile ısı uygulanan ve üst yapı porseleni uygulanan gruplar arasında biaksiyel bükülme dayanıklılığı yönünden istatistiksel olarak anlamlı fark bulunamadı (sırasıyla p=0.227 ve p=0.351). Tam sinterize zirkonya örneklerde ısı uygulaması bükülme dayanıklılığını kontrole ve üst yapı porseleni uygulanan gruplara göre belirgin olarak azalttı (sırasıyla p=0.022 ve p < 0.001); üst yapı porseleni uygulanan grup ile kontrol grubu arasında ise anlamlı fark bulunamadı (p=0.211). SONUÇ: Tüm grupların ortalama bükülme dayanıklılığı değerleri incelendiğinde, en yüksek bükülme dayanıklılığını üst yapı porseleni uygulanan tam sinterize zirkonya örnekler, en düşük bükülme dayanıklılığını ısı uygulaması yapılan yarı sinterize zirkonya örnekler gösterdi.

🔖

Cite This Article

KAVASOĞLU, M., AKÇABOY, C. (2015). The effect of the veneering procedures on the biaxial flexural strength of partially- and fully-stabilized zirconia core materials. Acta Odontologica Turcica, Cilt: 32 - Sayı: 1, 12–18. https://ajindex.com/articles/265430

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Guazzato M, Quach L, Albakry M, Swain MV. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. J Dent 2005;33:9-18. Isgrò G, Pallav P, van der Zel JM, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 2003;90:465- 73. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449-56.
  2. Zarone F, Russo S, Sorrentino R. From porcelain-fused-to-metal to zirconia: clinical and experimental considerations. Dent Mater 2011;27:83-96.
  3. Kohorst P, Herzog TJ, Borchers L, Stiesch-Scholz M. Load-bearing capacity of all-ceramic posterior four-unit fixed partial dentures with different zirconia frameworks. Eur J Oral Sci 2007;115:161-6. Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ. Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems. Dent Mater 2007;23:952-9.
  4. Studart AR, Filser F, Kocher P, Lüthy H, Gauckler LJ. Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges. Dent Mater 2007;23:115-23.
  5. Studart AR, Filser F, Kocher P, Gauckler LJ. Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges. Dent Mater 2007;23:106-14. Borba M, de Araújo MD, de Lima E, Yoshimura HN, Cesar PF, Griggs JA, et al. Flexural strength and failure modes of layered ceramic structures. Dent Mater 2011;27:1259-66.
  6. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
  7. Manicone PF, Rossi Iommetti P, Raffaelli L. An overview of zirconia ceramics: basic properties and clinical applications. J Dent 2007;35:819- 26. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307.
  8. Yilmaz H, Nemli SK, Aydin C, Bal BT, Tıraş T. Effect of fatigue on biaxial flexural strength of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Dent Mater 2011;27:786-95.
  9. Albakry M, Guazzato M, Swain MV. Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent 2003;89:374-80.
  10. Karakoca S, Yilmaz H. Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics. J Biomed Mater Res B Appl Biomater 2009;