Journals / International Journal of Automotive Engineering and Technologies / 2019 / Cilt: 8 - Sayı: 4

Predicted fuel characteristics of prunus avium seed oil as a candidate for biodiesel production

Pages
165–171
Publication Date
2019-12-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of this study, it was concluded that Prunus Avium kernel oil is a promising biodiesel candidate.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Energy is an indispensable requirement for both developed and developing societies today.
📊
Key Findings & Data:Oleic acid (C18:1) and Linoleic acid (C18:2) determined as 38.938 and 40.963 respectively.
💡
Conclusion & Impact:As a result of this study, it was concluded that Prunus Avium kernel oil is a promising biodiesel candidate.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Biodiesel · Fatty acid · Fuel Property

Abstract

Energy is an indispensable requirement for both developed and developing societies today. However, most of the energy needs are met by fossil fuels, these resources are not renewable. Many countries are evaluating alternative sources to meet energy demand and to sustain development. In this study, oil was obtained by using Prunus avium kernels, also known as Turkish Cherry cultivated from Pozantı which is on the Taurus Mountains. Oil characterization was performed by gas chromatography (GC) and free fatty acids were determined. Oleic acid (C18:1) and Linoleic acid (C18:2) determined as 38.938 and 40.963 respectively. The free fatty acids were then evaluated using the Biodiesel Analyzer v1.2 program. The predicted results were the total percentage of monosaturated fatty acids (MUFA) 39.408, total percentage of polyunsaturated fatty acids (PUFA) 41.042, Allylic Position Equivalents (APE) 121.146, Bisallylic position equivalents (BAPE) 41.220 respectively. On the other hand, Long Chain Saturated Factor (LCSF) is calculated as 3.624. Higher Heating Value (HHV) was calculated as 37.65Mj/kg, Cloud Point (CP) 0.099, Cold Filter Plugging Point (CFPP) -5.091° C, Density (d) 0.838 (g/cm3), Cetane Number (CN) 50.1, Iodine Value (IV) 109.878, Kinematic Viscosity 3.543, Flash Point (FP) 160.56, Saponification Value (SV) 191.354, and Oxidation Stability (OS) 5.468, respectively. As a result of this study, it was concluded that Prunus Avium kernel oil is a promising biodiesel candidate.

🔖

Cite This Article

ABDULVAHİTOĞLU, A. (2019). Predicted fuel characteristics of prunus avium seed oil as a candidate for biodiesel production. International Journal of Automotive Engineering and Technologies, Cilt: 8 - Sayı: 4, 165–171. https://ajindex.com/articles/258250

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Mancini M., Volpe M. L., Gatti B., Malik Y., Moreno A. C., Lekovar D., Cravero V. “Characterization of cardoon accessions as feedstock for biodiesel production” Fuel, 235 pp.1267-1293, 2019
  2. Lamaisri C., Punsuvon V., Anuruck S. C., Srinives A. P., Liangsakul P., “Relationship between fatty acid composition and biodiesel quality for nine commercial palm oils”, Songklanakarin J. Sci. Technol., 37(4) pp 389-395, 2015
  3. Sajjadi B., Abdul Raman A. A., Arandiyan H., “A comprehensive review on properties of edible and non-edible vegetable oil-based biodiesel: composition, specifications and prediction models.” Renewable and Sustainable Energy Reviews, 63, pp. 62-92, 2016
  4. Yang L., Takase M., Zhang M., Zhao T., Wu X. “Potential non-edible oil feedstock for biodiesel production in Africa: A survey”, Renewable and Sustainable Energy Reviews 38, pp 461-477, 2014
  5. Şanlı H. “Influences of biodiesel fuels produced from highly degraded waste animal fats on the injection and emission characteristics of a CRDI diesel engine” International Journal of Automotive Engineering and Technologies 8(1), pp.11-21, 2019
  6. Ors I., Kahraman A., and Ciniviz M. “Performance, emission, and combustion analysis of a compression ignition engine using biofuel blends” THERMAL SCIENCE, Vol. 21, No. 1B, pp. 511-522, 2017
  7. Kahraman A., Ciniviz M, Ors I., Oğuz H., “The Effect on Performance and Exhaust Emissions of Adding Cotton Oil Methyl Ester to Diesel Fuel” International Journal of Automotive Engineering and Technologies Vol 5, Issue 4, pp.148-154, 2016
  8. Özgün A. K., Eryılmaz T. “A Comparative study of engine performance and exhaust emissions of biodiesel and its blends produced from waste cooking oil and neutralized waste cooking oil” International Journal of Automotive Engineering and Technologies, 7 (3), pp. 88-97, 2018
  9. Can O., Oztürk E., Yücesu H. S. “Combustion and exhaust emissions of canola biodiesel blends in a single cylinder DI diesel engine” Renewable Energy, 109, pp.73-82, 2017
  10. Kaya C., Hamamcı C., Baysal A., Akba O., Erdogan S., Saydut A., “Methyl ester of peanut (Arachis hypogea L.) seed oil as a potential feedstock for biodiesel production” Renewable Energy 34, pp. 1257–1260, 2009
  11. Salaheldeen M., Aroua, M.K., Mariod A.A., Cheng S. F., Abdelrahman M.A. “An evaluation of Moringa peregrine seeds as a source for bio-fuel” Industrial Crops and Products Volume 61, pp. 49-61, 2014
  12. Yesilyurt M. K., Eryilmaz T., Arslan M. “A comparative analysis o