Journals / El-Cezeri / 2020 / Cilt: 7 - Sayı: 1

Comparison of Stress Control and Deformation Controlled Liquefaction Tests in Silty Sands

Siltli Kumlarda Gerilme Kontrollü ve Deformasyon Kontrollü Sıvılaşma Testlerinin Karşılaştırılması

Journal
El-Cezeri
Pages
322–337
Publication Date
2020-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that there was no significant difference between the results of deformation controlled and stress-controlled tests.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The liquefaction behavior of silty sands with different grain diameters and fine grain content during the earthquake is not the same and understanding the liquefaction mechanism of such soils continues to be one of the important subjects of geotechnical earthquake engineering.
📊
Key Findings & Data:For this purpose, deformation controlled and stress-controlled tests were performed on silty-sand samples prepared by mixing 5% and 30% silt to 20/30 and 30/50 sands of two different grades using cyclic simple shear tester.
💡
Conclusion & Impact:The results showed that there was no significant difference between the results of deformation controlled and stress-controlled tests.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sıvılaşma · Kum · Silt

Abstract

The liquefaction behavior of silty sands with different grain diameters and fine grain content during the earthquake is not the same and understanding the liquefaction mechanism of such soils continues to be one of the important subjects of geotechnical earthquake engineering. For this purpose, deformation controlled and stress-controlled tests were performed on silty-sand samples prepared by mixing 5% and 30% silt to 20/30 and 30/50 sands of two different grades using cyclic simple shear tester. The results showed that there was no significant difference between the results of deformation controlled and stress-controlled tests. However, with the increase of silt content, the resistance to liquefaction of silty-sand samples of both 20/30 sand and 30/50 sand decreased. In addition, the resistance to liquefaction of all samples increased with increasing relative density.

Özet

Deprem esnasında farklı tane çaplarında ve ince tane içeriğindeki siltli kumların sıvılaşma davranışı aynı olmayıp bu tür zeminlerin sıvılaşma mekanizmasını anlamak geoteknik deprem mühendisliğinin önemli konularından biri olmaya devam etmektedir. Bu amaçla, bu çalışmada iki farklı gradasyondaki 20/30 ve 30/50 kumlarına, %5 ve %30 oranında silt karıştırılarak hazırlanan siltli-kum numuneleri üzerinde, dinamik basit kesme test cihazı kullanılarak deformasyon kontrollü ve gerilme kontrollü testler gerçekleştirilmiştir. Sonuçlar deformasyon kontrollü ve gerilme kontrollü testlerin sonuçları arasında anlamlı bir fark olmadığını göstermiştir. Ancak silt içeriğinin artışı ile hem 20/30 kumu ve hem de 30/50 kumuna ait siltli-kum numunelerinin sıvılaşmaya karşı dirençleri azalmıştır. Ayrıca rölatif sıkılığın artışı ile tüm numunelerin sıvılaşmaya karşı direnci artmıştır.

🔖

Cite This Article

SÖNMEZER, Y. B. (2020). Comparison of Stress Control and Deformation Controlled Liquefaction Tests in Silty Sands. El-Cezeri, Cilt: 7 - Sayı: 1, 322–337. https://ajindex.com/articles/252650

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Bray J. D., Sancio R. B., Reimer M. F., Durgunoglu T., “Liquefaction susceptibility of fine-grained soils”, Liquefaction Susceptibility of fine-grained soils. proc., 11th Int. Conf. On Soil Dynamics and Earthquake Engineering and 3rd Int. Conf. On Earthquake Geotechnical Engineering, 2004, 1: 655-662. Berkeley, California, USA
  2. Arab A., Belkhatir M., “Fines content and cyclic preloading effect on liquefaction potential of silty sand: a laboratory study”, Acta Polytech Hung J, 2012, 9(4):47–64
  3. Yassine B., Bouafia A., Canou J., Dupla J. C., “Liquefaction susceptibility study of sandy soils: effect of low-plastic fines”, Arab J Geosci, 2014, 8:605–618
  4. Amini F., Qi G. Z., “Liquefaction testing of stratified silty sands”, J Geotech Geoenviron Eng, 2000, 126(3):208–217
  5. Chien L. K., Oh Y. N., Chang C. H., “Effect of fines content on liquefaction strength and dynamic settlement of reclaimed soil”, Can Geotech J, 2002, 39:254–265
  6. Xenaki V. C., Athanasopoulos G. A., “Liquefaction resistance of sand–silt mixtures: an experimental investigation of the effects of fines”, Soil Dyn Earthq Eng, 2003, 23:183–194
  7. Papadopoulou A., Tika T., “The effect of fines on critical state and liquefaction resistance characteristics of nonplastic silty sands. Soils Found, 2008, 48:713–725
  8. Dash H. K., Sitharam T. G., “Undrained cyclic pore pressure response of sand–silt mixtures: effect of non-plastic fines and other parameters”, J Geotech Geol Eng, 2009, 27:501–517
  9. Sitharam T. G., Dash H. K., Jakka R. S., “Post liquefaction undrained shear behavior of sand silt mixtures at constant void ratio”, ASCE Int J Geomech, 2013, 13(4):421–429
  10. Mominul H. M., Alam M. J., Ansary M. A., Karim M. E., Dynamic properties and liquefaction potential of a sandy soil containing silt. In: Proceedings of the 18th international conference on soil mechanics and geotechnical engineering, Paris, 2013, 1539–1542
  11. Emdadul K. M., Jahangir A. M., “Effect of nonplastic silt content on the liquefaction behaviour of sand–silt mixture” Soil Dyn Earthq Eng, 2014, 65:142–150
  12. Herna´ndez Y. A., Towhata I., Gunji K., Yamada S., “Laboratory tests on cyclic undrained behaviour of loose sand with cohesionless silt and its application to assessment of seismic performance of subsoil” Soil Dyn Earthq Eng, 2015, 79:365–378
  13. Yassine B., Bouafia A., Canou J., Dupla J. C., “Liquefaction susceptibility study of sandy soils: effect of low-plastic fines”, Arab J Geosci, 201