Journals / El-Cezeri / 2020 / Cilt: 7 - Sayı: 1

Thermodynamic and Exergy Analysis of an Absorptıon Cooling System for Different Refrigerants

Farklı Soğutucu Akışkanlar için Bir Absorbsiyonlu Soğutma Sisteminin Termodinamik ve Ekserji Analizi

Journal
El-Cezeri
Pages
93–103
Publication Date
2020-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Analysis results indicate that the LiBr-H2O solution pair showed better performance (higher COP and exergy efficiency) than the other solution pairs (NH3-H2O, NH3-LiNO3, NH3-NaSCN).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In absorption cooling systems, the compression of the working fluid is not made by the compressor but by a system consisting of absorbers, pumps and generators.
📊
Key Findings & Data:In this study, thermodynamic and exergy analysis of the system was performed to see the effects of different refrigerant solutions on the performance of an absorption cooling system.
💡
Conclusion & Impact:Analysis results indicate that the LiBr-H2O solution pair showed better performance (higher COP and exergy efficiency) than the other solution pairs (NH3-H2O, NH3-LiNO3, NH3-NaSCN).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Ekserji · NH3 · LiBr/H2O

Abstract

In absorption cooling systems, the compression of the working fluid is not made by the compressor but by a system consisting of absorbers, pumps and generators. The fact that the compressor is not used for compression reduces the power required for this process. In this case, absorption cooling systems are very useful when used with renewable energy sources. In this study, thermodynamic and exergy analysis of the system was performed to see the effects of different refrigerant solutions on the performance of an absorption cooling system. In the absorption cooling system for Lithium bromide-Water (LiBr-H2O), ammonia-water (NH3-H2O), ammonia-lithium nitrate (NH3-LiNO3) and ammonia-sodium thiocyanate (NH3-NaSCN) fluid couples, the Coefficient of Performance (COP) and Exergy Efficiency (%) of the system were examined for each fluid pair by analyzing at different generator, evaporator and absorber temperatures. Analysis results indicate that the LiBr-H2O solution pair showed better performance (higher COP and exergy efficiency) than the other solution pairs (NH3-H2O, NH3-LiNO3, NH3-NaSCN).

Özet

Absorpsiyonlu soğutma sistemlerinde çalışma akışkanının sıkıştırma işlemi kompresörle değil absorber, pompa ve generatörden oluşan bir sistemle yapılmaktadır. Sıkıştırma işlemi için kompresör kullanılmaması bu işlem için ihtiyaç duyulan gücü azaltmaktadır. Bu durumda absorbsiyonlu soğutma sistemleri yenilenebilir enerji kaynakları ile kullanıldığında oldukça kullanışlı olmaktadır. Bu çalışmada farklı soğutucu akışkan çözeltilerinin bir absorpsiyonlu soğutma sisteminin performansı üzerindeki etkilerini görebilmek için sistemin termodinamik ve ekserji analizi yapılmıştır. Lityum bromür-Su (LiBr-H20), amonyak-su (NH3-H20), amonyak-lityum nitrat (NH3-LiNO3) ve amonyak-sodyum tiyosiyanat (NH3-NaSCN) akışkan çiftleri için absorbsiyonlu soğutma sisteminde farklı jeneratör, buharlaştırıcı ve absorber sıcaklıklarında analiz yapılarak sistemin Soğutma Tesir Katsayısı (STK) ve Ekserji Verimleri (%) her bir akışkan çifti için incelenmiştir. Analiz sonuçları LiBr-H2O çözelti çiftinin diğer akışkan çiftlerine (NH3-H2O, NH3-LiNO3, NH3-NaSCN) göre daha iyi bir performansa sahip olduğunu göstermiştir.

🔖

Cite This Article

ÖZEN, D. N., YAĞCIOĞLU, K. Ç. (2020). Thermodynamic and Exergy Analysis of an Absorptıon Cooling System for Different Refrigerants. El-Cezeri, Cilt: 7 - Sayı: 1, 93–103. https://ajindex.com/articles/252629

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Kaita, Y. "Thermodynamic properties of lithium bromide–water solutions at high temperatures." International Journal of refrigeration, 2001, 24 (5): 374-390.
  2. Florides, Georgios A., et al. "Design and construction of a LiBr–water absorption machine." Energy conversion and management, 2003, 44 (15): 2483-2508.
  3. Abdulateef, J. M., Sopian, K., Alghoul, M. A., Sulaiman, M. Y., Zaharim, A., & Ahmad, I. "Solar absorption refrigeration system using new working fluid pairs." International Journal of Energy, 2007, 1 (3): 82-87
  4. Crepinsek, Z., D. Goricanec, and J. Krope. "Comparison of the performances of absorption refrigeration cycles." Wseas transactions on heat and mass transfer, 2009, 4 (3): 65-76
  5. Manu, S., T. B. Prasad, and T. K. Chandrashekar. "Nagendra. Theortical Model of Absorber for Miniature LiBr-H2O Vapor Absorption Refrigeration System." Int J Mod Eng Res, 2012, 2: 10-7
  6. Patel, H. A., Patel, L. N., Jani, D., & Christian, A., “Energetic Analysis of Single Stage Lithium Bromide Water Absorption Refrigeration System.” Procedia Technology, 2016, 23: 488-495.
  7. Farshi, L. G., Ferreira, C. I., Mahmoudi, S. S., & Rosen, M. A., “First and second law analysis of ammonia/salt absorption refrigeration systems.” international journal of refrigeration, 2014, 40: 111-121.
  8. Bouaziz, N., & Lounissi, D., “Energy and exergy investigation of a novel double effect hybrid absorption refrigeration system for solar cooling.” International journal of hydrogen energy, 2015, 40 (39): 13849-13856.
  9. Ganesh, N. S., & Srinivas, T., “Evaluation of thermodynamic properties of ammonia-water mixture up to 100 bar for power application systems.” Journal of mechanical engineering research, 2011, 3 (1): 25-39
  10. Ziegler B, Trepp CH. “Equation of state for ammonia-water mixtures” Refrig., 1984, 7: 101-106
  11. Pa Patek, J., & Klomfor, J., “Simple Functions for Fast Calculations of Selected Thermodynamic Properties of the Ammonia-Water System.” Int.J.Refring, 1995, 4 (18): 228-234.
  12. Anusha, B., & Chaitanya, B., “Performance Analysis of Absorption Refrigeration Cycles.” International Journal of Advanced Engineering Research and Science, 2017, 4 (1)
  13. Kaushik, S., & Arora, A., “En