Journals / El-Cezeri / 2020 / Cilt: 7 - Sayı: 1

Analysis of 19x39x19 cm Pumice Brick Material Production with Fuzzy Statistical Process Control Technique

Bulanık İstatistiksel Proses Kontrol Tekniği İle 19x39x19 cm Bims Hafif Yapı Malzemesi Üretiminin Analizi

Journal
El-Cezeri
Pages
43–56
Publication Date
2020-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, fuzzy statistical process control techniques have been used to determine whether a 19x39x19 cm pumice brick, which is a product of a pumice brick factory, with fuzzy observation values is under control of the production process.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Statistical Process Control (SPC) is the most important a math-based tool used by engineers to control non-standard production and to ensure that production outputs are performed at specified quality ranges.
📊
Key Findings & Data:However, in cases where conventional SPC is inadequate, fuzzy statistical process control approaches have been developed which enable more precise statistical process control using fuzzy set theory.
💡
Conclusion & Impact:In this study, fuzzy statistical process control techniques have been used to determine whether a 19x39x19 cm pumice brick, which is a product of a pumice brick factory, with fuzzy observation values is under control of the production process.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hafif yapı malzemesi · bims · kalite kontrol

Abstract

Statistical Process Control (SPC) is the most important a math-based tool used by engineers to control non-standard production and to ensure that production outputs are performed at specified quality ranges. However, in cases where conventional SPC is inadequate, fuzzy statistical process control approaches have been developed which enable more precise statistical process control using fuzzy set theory. In this study, fuzzy statistical process control techniques have been used to determine whether a 19x39x19 cm pumice brick, which is a product of a pumice brick factory, with fuzzy observation values is under control of the production process.

Özet

İstatistiksel Proses Kontrolü (İPK), üretim çıktılarının ürün özelliklerini belirlenen kalite aralıklarında yapılmasını kontrol eden, sağlayan ve standart dışı üretimin önüne geçmede mühendislerin kullandığı en önemli matematik esaslı bir araçtır. Ancak konvansiyonel İPK yöntemlerinin yetersiz kaldığı durumlarda bulanık küme teorisinden yararlanılan daha hassas istatistiksel proses kontrolüne imkan veren bulanık istatistiksel proses kontrol yaklaşımları geliştirilmiştir. Bu çalışmada, bir Bims fabrikası ürünü olan 19x39x19 cm Bims ürününün üretim sürecin kontrol altında olup olmadığının belirlenmesinde bulanık istatistiksel proses kontrol tekniklerinden yararlanılarak elde edilen sonuçlar sunulmuştur.

🔖

Cite This Article

GÖZTOK, K. K., UÇURUM, M., ÖZDEMİR, A. (2020). Analysis of 19x39x19 cm Pumice Brick Material Production with Fuzzy Statistical Process Control Technique. El-Cezeri, Cilt: 7 - Sayı: 1, 43–56. https://ajindex.com/articles/252625

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Akarsu, O., “Endüstriyel minerallerin pazarlama ve ekonomisi”, Dokuz Eylül Üniversitesi Maden Mühendisliği Bölümü. İzmir: Diploma Projesi, 1999, 116-122.[2] DPT, “Çimento hammaddeleri ve yapı malzemeleri”, Madencilik Özel İhtisas Komisyonu Endüstriyel Hammaddeler Alt Komisyonu Çimento Hammaddeleri ve Yapı Malzemeleri Çalışma Grubu Raporu, Ankara, 1996, 3-50.[3] http://www.blokbims.com.tr (Erişim Tarihi: 13.05.2018).[4] http://www.blockmachines.com (Erişim Tarihi: 17.05.2017).[5] Köse, H., “Pomza ve yapı malzemesi olarak kullanım olanakları”, 2. Endüstriyel Hammaddeler Sempozyumu, İzmir, 1997, 97-105.[6] Türkiye Odalar ve Borsalar Birliği, Türkiye Toprak Sanayi Meclisi, “Bims (pomza) alt sektör raporu”, https://www.byclb. com/Files/sektor_raporlari, 2006, (Erişim Tarihi: 20.11.2018).[7] Gündüz, L. (Ed.), “Hafif beton olarak pomza”, I. Isparta Pomza Sempozyumu Bildiriler Kitabı, Isparta: SDÜ, 1998, 103-107.[8] Gündüz, L., Bekar, M., Şapcı, N., “Influence of a newtype of additive on theperformance of polymer-light weight mortar composites”, Cementand Concrete Composites, 2007, 29, 594-602.[9] Demirdağ, S., Gündüz, L., “Strengthproperties of volcanic slag aggregate light weight concrete for high performance”, Construction and Building Materials, 2008, 22, 135– 142.[10] Gündüz, L., “Isı yalıtım agregası olarak pomzanın kullanımı”, 4. Endüstriyel Hammaddeler Sempozyumu. İzmir, 2001, 59-68.[11] Cavaleri, L., Miraglia, N., Papia, M., “Pumice concrete for structural wall panels”, Engineering Structures, 2003, 25, 115–125.[12] Campione, G. And Mendola, L., “Behavior in compression of lightweight fiber rein forced concrete confined with transverse steel reinforcement”, Cementand Concrete Composites, 2004, 26, 645–656.[13] Piora, L.S., Piora, I.L., “Production of expanded clayag gregate for light weight concrete from non-self bloating clays”, Cementand Concrete Composites, 2004, 6, 639-643.[14] Gündüz, L., Davraz, M., Ortaçeşme, H., “Bimsblok ve ısı yalıtım özellikleri”, Türkiye Pomza Sempozyumu ve Sergisi Bildirimler Kitabı, 2005, 277-278.[15] Gündüz, L., “Pomza kullanımının ar-ge ve yenilik performansını artırmak sunumu”, Bims ve Pomza Çalıştayı-1, 2011, Nevşehir.[16] Akın, B., “İşletmelerde istatistik proses kontrol, İPK Teknikleri”, İstanbul: Bilim Teknik Yayınevi, 1996.[17] Durman, B.M., Pakdil, F., “İstatistiki proses kontrol uygulamaları için bir sistem tasarımı”, VII Ekonometri Kongresi, 2005, İstanbul.[18] Elevli S., Behdioğlu S., “İstatistiksel proses k