SavedAdd your journal

Journals / El-Cezeri / 2019 / Cilt: 6 - Sayı: 1

Differences Between Dry and Wet Route Tile Production

Karo Üretiminde Kuru ve Islak Yöntemlerin Farklılıkları

Alper KOÇAK
Bekir KARASU
Journal
El-Cezeri
Pages
8–23
Publication Date
2019-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Tile production has an important place in overall ceramic production.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Tile production has an important place in overall ceramic production.
📊
Key Findings & Data:There are different types of methods for them.
💡
Conclusion & Impact:This paper was prepared to give detail information about both methods.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Karo · Islak yöntem · Kuru yöntem

Abstract

Tile production has an important place in overall ceramic production. There are different types of methods for them. Companies generally use wet route for raw materials preparation. However, dry route has been started to be used at large scale in recent years. There are some advantages and disadvantages for dry and wet route tile productions. This paper was prepared to give detail information about both methods.

Özet

Seramik sektörünün büyük bir kısmını oluşturan karo üretiminde farklı yöntemler kullanılmaktadır. Genellikle üretim ıslak yöntem ile gerçekleştirilmektedir. Son yıllarda kuru yöntemle üretim de yaygın bir biçimde kullanılmaya başlamıştır. Her iki yönteminde bir takım avantajları ve dezavantajları bulunmaktadır. Bu makale kuru ve ıslak yolla karo üretimi hakkında detaylı bilgi sunmak amacıyla hazırlanmıştır.

🔖

Cite This Article

KOÇAK, A., KARASU, B. (2019). Differences Between Dry and Wet Route Tile Production. El-Cezeri, Cilt: 6 - Sayı: 1, 8–23. https://ajindex.com/articles/252406

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. http://www.brighthubengineering.com/manufacturing-technology/56841-what-are-ceramic-materials-and-their-uses/ (Access date: 25.03.2018). [2] https://sites.google.com/site/mechanicalstuff4u/contents-of-m/manufacturing-technology/engineering-materials-and-their-properties (Access date: 25.03.2018)
  2. Wang H., Chen Z., Liu L., Ji R., Wang X., “Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent”, Ceramics International, 2018, Vol 44, Issue, 10078-10086. [4] http://ceramics.org/learn-about-ceramics/structure-and-properties-of-ceramics (Access date: 25.03.2018). [5] http://www.substech.com/dokuwiki/doku.php?id=general_classification_of_ceramics (Access date: 25.03.2018). [6] da Silva A. L., Dondi M., Raimondo M., Hotza D., “Photocatalytic ceramic tiles: Challenges and technological solutions”, Journal of the European Ceramic Society, 2018, 1002–1017
  3. Carty W. M., Senapati U., "Porcelain–raw materials, processing, phase evolution and mechanical behaviour", J. Amer. Ceram. Soc., 1998, 81, 3–20
  4. Schmidt H., "Chemical and physical reactions in heavy clay bodies during firing", Ziegelindustrie International, 1981, 367–397
  5. Hanuskovà M., Manfredini T., “Requirements and industrial applications of clays in manufacturing of fast fired sintered unglazed tiles”, Scripta Fac. Sci. Nat. Univ. Masaryk. Brùn., Geology, 1998–99, 28/29, 67–76
  6. Hanuskovà M., Manfredini T., Romagnoli M., “Laser particle size analysis: a tool in designing traditional ceramic processes”, Bull. Am. Ceram. Soc., 1999, 78, 11, 73–77
  7. Manfredini T., Romagnoli M., Hanuskovà, M., “Wollastonite as sintering-aid for percelain stoneware bodies”, Int. Ceram., 2000, XVIII, 6, 61–67
  8. Manfredini T. and Hanuskovà M., “Natural raw materials and inorganic pigments for ceramics”, Proceedings of Seminar on Advanced Ceramics: Technology and Applications, Hanoi (Vietnam), 9 July 2002
  9. Hanuskovà M., Manfredini T., “Clays in manufacturing of unglazed porcelainized stoneware”, Int. Ceram., 2002, XX, 5, 99–103
  10. Hanuskovà M., “Feldspar–based sintering aids for the ceramic industry”, Int. Ceram., 2003, XXI, 2, 35–39
  11. Hanuskovà M., “Zirconium silicate in the ceramic industry”, Int. Ceram., 2003, XXI, 2, 45–49
  12. Hanuskovà M., “Unconventional raw materials for structural ceramics", Int. Ceram., 2008, XXVI, 4
  13. Cannio M., Hanuskovà M,, “Wollastonite”, Int. Ceram., 2009, XXVII, 5, 43–47
  14. Hanuskovà M,, Manfredini T., “Applicatio