Journals / El-Cezeri / 2021 / Cilt: 8 - Sayı: 2

Anodic Oxidation of Reactive Dye with Ti-Based Metal Oxide Coated Electrode: Optimization of Process Conditions

Ti-Bazlı Metal Oksit Kaplanmış Elektrot ile Reaktif Boyar Maddenin Anodik Oksidasyonu: Proses Şartlarının Optimizasyonu

Journal
El-Cezeri
Pages
951–961
Publication Date
2021-05-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A highly linear relationship was observed between the predicted and experimentally obtained dye removal of the model. 99% dye removal was observed in optimum conditions in the process and it was determined that the most effective parameter in removal efficiency was the electrolyte type.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the anodic oxidation of the Sunfix Red-3SB (SR-S3B) reactive dye used as a model compound with metal oxide coated titanium electrodes was investigated.
📊
Key Findings & Data:RuO2‐ IrO2/Ti electrodes were used as anode, titanium electrodes as cathode.
💡
Conclusion & Impact:A highly linear relationship was observed between the predicted and experimentally obtained dye removal of the model. 99% dye removal was observed in optimum conditions in the process and it was determined that the most effective parameter in removal efficiency was the electrolyte type.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Anodik oksidasyon · Sunfix Red-S3B · Taguchi Deney Tasarım Modeli

Abstract

In this study, the anodic oxidation of the Sunfix Red-3SB (SR-S3B) reactive dye used as a model compound with metal oxide coated titanium electrodes was investigated. RuO2‐ IrO2/Ti electrodes were used as anode, titanium electrodes as cathode. The anodic oxidation process has been optimized for operating conditions to ensure the highest dye removal. Optimum conditions of oxidation time, pH, electrolyte type and current intensty parameters were determined as 20 min., pH 3, NaCl electrolyte type and 0.32 A/dm2 with Taguchi Experimental Design Model. A highly linear relationship was observed between the predicted and experimentally obtained dye removal of the model. 99% dye removal was observed in optimum conditions in the process and it was determined that the most effective parameter in removal efficiency was the electrolyte type.

Özet

Bu çalışmada model bileşik olarak kullanılan Sunfix Red-S3B (SR-S3B) reaktif boyar maddenin metal oksit kaplanmış titanyum elektrotlar ile anodik oksidasyonu incelenmiştir. Anot olarak RuO2‐IrO2/Ti, katot olarak titanyum elektrotlar kullanılmıştır. Anodik oksidasyon prosesi işletme koşulları en yüksek boya giderimini sağlayacak biçimde optimize edilmiştir. Taguchi deney Tasarım Modeli ile oksidasyon süresi, pH, elektrolit tipi ve akım yoğunluğu parametrelerinin optimum koşulları sırası ile 20 dk, pH 3, NaCl elektrolit tipi ve 0.32 A/dm2 olarak belirlenmiştir. Modelin öngördüğü ile deneysel olarak elde edilen boya giderimi arasında yüksek derece doğrusal bir ilişki olduğu gözlenmiştir. Proseste optimum koşullarda %99 boya giderimi gözlemlenmiştir ve giderim veriminde en etkili parametrenin elektrolit tipi olduğu belirlenmiştir.

🔖

Cite This Article

GENÇ, N., DURNA, E. (2021). Anodic Oxidation of Reactive Dye with Ti-Based Metal Oxide Coated Electrode: Optimization of Process Conditions. El-Cezeri, Cilt: 8 - Sayı: 2, 951–961. https://ajindex.com/articles/252214

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. L. Xu, X. Ma, J. Niu, J. Chen, and C. Zhou, “Removal of trace naproxen from aqueous solution using a laboratory-scale reactive flow-through membrane electrode,” J Hazard Mater, vol. 379, p. 120692, Nov. 2019, doi: 10.1016/j.jhazmat.2019.05.085
  2. T. Muddemann, D. Haupt, M. Sievers, and U. Kunz, “Electrochemical Reactors for Wastewater Treatment,” ChemBioEng Rev, vol. 6, no. 5, pp. 142–156, Oct. 2019, doi: 10.1002/cben.201900021
  3. A. N. Subba Rao and V. T. Venkatarangaiah, “Metal oxide-coated anodes in wastewater treatment,” Environmental Science and Pollution Research, vol. 21, no
  4. Springer, pp. 3197–3217, Mar. 29, 2014, doi: 10.1007/s11356-013-2313-6
  5. E. Isarain-Chávez et al., “Comparative electrochemical oxidation of methyl orange azo dye using Ti/Ir-Pb, Ti/Ir-Sn, Ti/Ru-Pb, Ti/Pt-Pd and Ti/RuO2 anodes,” Electrochim Acta, vol. 244, pp. 199–208, Aug. 2017, doi: 10.1016/j.electacta.2017.05.101
  6. L. Wang and N. Balasubramanian, “Electrochemical regeneration of granular activated carbon saturated with organic compounds,” Chem Eng J, vol. 155, no. 3, pp. 763–768, Dec. 2009, doi: 10.1016/j.cej.2009.09.020
  7. F. Sharif and E. P. L. Roberts, “Anodic electrochemical regeneration of a graphene/titanium dioxide composite adsorbent loaded with an organic dye,” Chemosphere, vol. 241, p. 125020, Feb. 2020, doi: 10.1016/j.chemosphere.2019.125020
  8. S. Barışçı, O. Turkay, E. Ulusoy, G. Soydemir, M. G. Seker, and A. Dimoglo, “Electrochemical treatment of anti-cancer drug carboplatin on mixed-metal oxides and boron doped diamond electrodes: Density functional theory modelling and toxicity evaluation,” J Hazard Mater, vol. 344, pp. 316–321, Feb. 2018, doi: 10.1016/j.jhazmat.2017.10.029
  9. Y. Zhou, Z. Liang, and Y. Wang, “Decolorization and COD removal of secondary yeast wastewater effluents by coagulation using aluminum sulfate,” Desalination, vol. 225, no. 1–3, pp. 301–311, May 2008, doi: 10.1016/j.desal.2007.07.010
  10. C. Wang, Y. Yu, L. Yin, J. Niu, and L. A. Hou, “Insights of ibuprofen electro-oxidation on metal-oxide-coated Ti anodes: Kinetics, energy consumption and reaction mechanisms,” Chemosphere, vol. 163, pp. 584–591, Nov. 2016, doi: 10.1016/j.chemosphere.2016.08.057
  11. J. Singla, A. Verma, and V. K. Sangal, “Applications of doped mixed metal oxide anode for the electro-oxidation treatment and mineralization of urine metabolite, uric acid,” J Water Process Eng, vol. 32, p. 100944, Dec. 2019, doi: 10.1016/j.jwpe.2019.100944
  12. R. V.