Journals / El-Cezeri / 2021 / Cilt: 8 - Sayı: 2

Investigation of The Size Effect of Self-Compacting Concrete on Direct Tensile Strength

Kendiliğinden Yerleşen Betonun Doğrudan Çekme Dayanımına Boyut Etkisinin Araştırılması

Journal
El-Cezeri
Pages
827–840
Publication Date
2021-05-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the study, it was revealed that there is an inverse proportion between the thickness of the specimen and the direct tensile strength, and depending on the increase in the specimen thickness, the experimental direct tensile strengths approached the tensile strengths specified in the building codes.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The correct determination of direct tensile strength is very important in reinforced concrete building design.
📊
Key Findings & Data:The experimental direct tensile strengths were compared with the experimental splitting and flexural tensile strength, and also their proximity to tensile strengths expressed in certain building codes such as TS500, Eurocode and ACI 318 were investigated.
💡
Conclusion & Impact:As a result of the study, it was revealed that there is an inverse proportion between the thickness of the specimen and the direct tensile strength, and depending on the increase in the specimen thickness, the experimental direct tensile strengths approached the tensile strengths specified in the building codes.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:direkt çekme dayanımı · boyut etkisi · kyb

Abstract

The correct determination of direct tensile strength is very important in reinforced concrete building design. Unless otherwise specified in the building codes, the tensile strength that should be used in building design is direct tensile strength. However, the direct tensile strengths stated in the codes are usually found by formulas based on compressive strength, flexural tensile strength or splitting tensile strength. The fact that direct tensile tests are difficult to apply and there are no clear principles in the building codes, as in indirect methods, have led to a limited number of studies on direct tensile strength. In previous studies on direct tensile tests, certain standards were not established regarding the sizes and shapes of the samples subjected to the test. In this study, the size effect of self-compacting concrete (SCC) on direct tensile strength was investigated. In this context, direct tensile strengths of dog-bone type SCC specimens of different thicknesses were compared. The experimental direct tensile strengths were compared with the experimental splitting and flexural tensile strength, and also their proximity to tensile strengths expressed in certain building codes such as TS500, Eurocode and ACI 318 were investigated. As a result of the study, it was revealed that there is an inverse proportion between the thickness of the specimen and the direct tensile strength, and depending on the increase in the specimen thickness, the experimental direct tensile strengths approached the tensile strengths specified in the building codes.

Özet

Özellikle çekme gerilmelerinin kritik seviyede olduğu yapı elemanlarının tasarımında betonun çekme gerilmesi önemli parametrelerden biridir. Yapı şartnamelerinde çoğunlukla bahsedilen çekme dayanımı doğrudan çekme dayanımıdır. Ancak şartnamelerde ifade edilen çekme dayanımları, genellikle basınç dayanımı veya dolaylı yöntemlerle bulunan çekme dayanımlara bağlı formüllerle bulunmaktadır. Doğrudan çekme testlerinin uygulamasının zor olması ve dolaylı yöntemlerde olduğu gibi belli şartname esaslarının olmaması doğrudan çekme dayanımı ile ilgili çalışmaların sınırlı sayıda kalmasına neden olmuştur. Bu nedenle doğrudan çekme testleri ile ilgili yapılan önceki çalışmalarda teste tabi tutulan numune ebatları ve şekilleri ile ilgili belli standartlar oluşmamıştır. Bu çalışmada kendiliğinden yerleşen betonun (KYB) doğrudan çekme dayanımına boyut etkisi incelenmiştir. Bu kapsamda farklı kalınlıklarda dog-bone tipi KYB numunelerin doğrudan çekme dayanımları karşılaştırılmıştır. Deneysel doğrudan çekme dayanımları, deneysel yarmada çekme ve eğilmede çekme dayanımları ile karşılaştırılmış olup aynı zamanda TS500, Eurocode ve ACI 318 gibi yapı şartnamelerinde ifade edilen teorik çekme dayanımlarına yakınlıkları araştırılmıştır. Çalışma neticesinde numune kalınlığı ile doğrudan çekme dayanımı arasında ters orantı olduğu ve numune kalınlıklarının artmasına bağlı olarak, deneysel doğrudan çekme dayanımlarının şartnamelerde belirtilen teorik çekme dayanımlarına yaklaştığı ortaya konulmuştur.

🔖

Cite This Article

GÜLEÇ, A., AVCI, U. (2021). Investigation of The Size Effect of Self-Compacting Concrete on Direct Tensile Strength. El-Cezeri, Cilt: 8 - Sayı: 2, 827–840. https://ajindex.com/articles/252205

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. . Shi C., Wu Z., Lv K., Wu L., "A review on mixture design methods for self-compacting concrete", Construction and Building Materials, 2015, 84: 387-398. [2]. Öz A., Bayrak B., Aydın A. C., "The effect of trio-fiber reinforcement on the properties of self-compacting fly ash concrete", Construction and Building Materials, 2020, 274: 121825. [3]. Gönen T., Yazıcıoğlu, S., “Pomza agregalı kendiliğinden yerleşen hafif betonların donma çözülme direncine mineral katkıların etkisi”, El-Cezeri Journal of Science and Engineering, 2021, 8(1)
  2. . Taha M. R., Hassanain M. A., "Estimating the error in calculated deflections of HPC slabs: a parametric study using the theory of error propagation", Acı Special Publications, 2003, 210: 65-92. [5]. Slowik V., Saouma V. E., Thompson A., "Large scale direct tension test of concrete", Cement and Concrete Research, 1996, 26 (6)
  3. . Contamine R., Larbi A. S., Hamelin P., "Contribution to direct tensile testing of textile reinforced concrete (TRC) composites", Materials Science and Engineering, 2011, A 528.29-30: 8589-8598. [7]. Swaddiwudhipong S., Lu H. R., Wee T. H., "Direct tension test and tensile strain capacity of concrete at early age", Cement and concrete research, 2003, 33 (12): 2077-2084. [8]. Alhussainy F., Hasan H. A., Rogic S., Sheikh M. N., Hadi M. N., "Direct tensile testing of self-compacting concrete", Construction and Building Materials, 2016, 112: 903-906. [9]. Dashti J., Nematzadeh M., "Compressive and direct tensile behavior of concrete containing Forta-Ferro fiber and calcium aluminate cement subjected to sulfuric acid attack with optimized design", Construction and Building Materials 2020, 253: 118999. [10]. Tunc E. T., Alyamaç K. E., Ulucan Z., "A Numerical Approach to Estimate the Tensile Strength of Structural Lightweight Concrete", El-Cezeri Journal of Science and Engineering, 2020, 7 (2): 690-699. [11]. Moradian M., Shekarchi M., "Durability and dimensional stability of steel fiber reinforced cementitious mortar in comparison to high performance concrete", Asian Journal Of Civil Engineering (Building And Housing), 2016: 515-535. [12]. Shin K. J., Jang K. H., Choi Y. C., Lee S. C., "Flexural behavior of HPFRCC members with inhomogeneous material properties", Materials, 2015, 8 (4): 1934-1950. [13]. Krishnaraja A. R., Kandasamy S., Kowsalya M., "Influence of polymeric and non-polymeric fibers in hybrid engineered cementitious composites", Revista Romana de Materiale, 2018, 48 (4):