Journals / El-Cezeri / 2021 / Cilt: 8 - Sayı: 2

Permanent Magnet Flux Switching Torque Performance Indicator

Kalıcı Mıknatıs Akısı Anahtarlama Tork Performansı Gösterge

Journal
El-Cezeri
Pages
582–591
Publication Date
2021-05-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Among many design variation, outer rotor configuration produces good values as overall in the TPI.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Flux switching machine (FSM) offer advantages such as rotor robustness and simple driving circuit compared to competing machine.
📊
Key Findings & Data:This paper attempts to process the torque, volume and current information from 35 latest Permanent Magnet (PM) FSM publication into a standardized Torque Performance Indicator (TPI), which are torque density, torque constant, torque constant density and torque-magnet ratio.
💡
Conclusion & Impact:Among many design variation, outer rotor configuration produces good values as overall in the TPI.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Akı anahtarlama makinesi · Makine tasarımı · Tork yoğunluğu

Abstract

Flux switching machine (FSM) offer advantages such as rotor robustness and simple driving circuit compared to competing machine. This paper attempts to process the torque, volume and current information from 35 latest Permanent Magnet (PM) FSM publication into a standardized Torque Performance Indicator (TPI), which are torque density, torque constant, torque constant density and torque-magnet ratio. The distribution median shows that torque density, torque constant, torque constant density and torque-magnet ratio are 23.24kNm/m3, 0.43Nm/A, 0.616Nkm/Am3 and 30.79Nm/kg respectively. Among many design variation, outer rotor configuration produces good values as overall in the TPI. This information can be used to guide the machine designer to compare and compete based on the standardized TPI.

Özet

Flux switching machine (FSM), rakip makineye kıyasla rotor sağlamlığı ve basit sürüş devresi gibi avantajlar sunar. Bu makale, tork, hacim ve akım bilgilerini en son 35 Permanent Magnet (PM) FSM yayınından, tork yoğunluğu, tork sabiti, tork sabit yoğunluğu ve tork-mıknatıs oranı olan standartlaştırılmış bir Torque Performance Indicator (TPI) işlemeye çalışmaktadır. Dağılım medyanı, tork yoğunluğu, tork sabiti, tork sabit yoğunluğu ve tork-mıknatıs oranının sırasıyla 23.24kNm / m3, 0.43Nm / A, 0.616Nkm / Am3 ve 30.79Nm / kg olduğunu göstermektedir. Birçok tasarım varyasyonu arasında, dış rotor konfigürasyonu genel olarak TPI'da olduğu gibi iyi değerler üretir. Bu bilgi, makine tasarımcısına standartlaştırılmış TPI'ya göre karşılaştırma ve rekabet etme konusunda rehberlik etmek için kullanılabilir.

🔖

Cite This Article

HALİM, M. F. M. A., SULAİMAN, E. (2021). Permanent Magnet Flux Switching Torque Performance Indicator. El-Cezeri, Cilt: 8 - Sayı: 2, 582–591. https://ajindex.com/articles/252185

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Global EV Outlook 2018, 2018. OECD, 2018
  2. I. López, E. Ibarra, A. Matallana, J. Andreu, and I. Kortabarria, “Next generation electric drives for HEV/EV propulsion systems: Technology, trends and challenges,” Renew. Sustain. Energy Rev., 114, May, 2019, 109336
  3. AAB, “Technical note - IEC 60034-30-1 standard on efficiency classes for low voltage AC motors.
  4. J. F. Miller and D. Howell, “The EV everywhere grand challenge,” World Electr. Veh. J., 2013
  5. J. J. H. Paulides, “Reluctance machines: facing the challenges of future electrical power trains,” 2014, 2014
  6. C. Pollock and M. Wallace, “Flux switching motor, a DC motor without magnets or brushes,” Conf. Rec. - IAS Annu. Meet. (IEEE Ind. Appl. Soc., 3, 1999, 1980–1987
  7. C. Pollock et al., “Flux Switching Motors for Automotive Applications,” 2003, 242–249
  8. R. N. Firdaus Kashfi Raja Othman et al., “Torque constant density in different type of double stator permanent magnet brushless DC motor,” Prog. Electromagn. Res. M, 66, March, 2018, 127–142
  9. A. Trianni, E. Cagno, and D. Accordini, “A review of energy efficiency measures within electric motors systems,” Energy Procedia, 158, 2019, 3346–3351
  10. R. Kumar, E. Sulaiman, H. A. Soomro, S. H. A. Musavi, G. Kumar, and I. A. Sohu, “Electromagnetic analysis of outer rotor permanent magnet flux switching machine for downhole application,” ICIEECT 2017 - Int. Conf. Innov. Electr. Eng. Comput. Technol. 2017, Proc., 2017
  11. E. Sulaiman, G. M. Romalan, and N. W. A. Ghani, “Design improvement of flux switching permanent magnet using combined local and global method,” ICCEREC 2016 - Int. Conf. Control. Electron. Renew. Energy, Commun. 2016, Conf. Proc., 1, 2017, 214–219
  12. M. Ahmad, E. Sulaiman, Z. Haron, F. Khan, and M. Mazlan, “Analysis of a New Dual Excitation Flux Switching Machine with Outer- Rotor Configuration for Direct Drive EV,” 695, 2015, 787–791
  13. E. Bin Sulaiman and A. M. Arab, “Fundamental Study Of Outer-Rotor Hybrid Excitation Flux Switching Generator For Grid Connected Wind Turbine Applications,” 2015 IEEE Student Conf. Res. Dev., 2015, 716–720
  14. E. I. Mbadiwe and E. Sulaiman, “Improved design of outer rotor machine in PM technology for motor bike drive application,” 2018, 2018
  15. C. H. T. Lee, J. L. Kirtley, and M. Angle, “A Partitioned-Stator Flux-Switching Permanent-Magnet Machine with Mechanical Flux Adjusters for Hybrid Electric Vehicles,” IEEE Trans. Magn., 53, 11, 2017
  16. E. Mbadiwe and E. Sulai