Journals / Bor Dergisi / 2018 / Cilt: 3 - Sayı: 1

Synthesis of Fe-Fe2B catalysts via solvothermal route for hydrogen generation by hydrolysis of NaBH4

Pages
51–62
Publication Date
2018-03-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

With 0.01 g of Fe-Fe2B catalyst in 1 % w/w NaBH4 concentration at 25 °C, the hydrogen production rate was 570 mL of H2.g-1.m-1, which reached to 1230 at 50 °C and 2700 mL at 70 °C.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, iron sulfate heptahydrate (FeSO4.7H2O) and sodium borohydride (NaBH4) were used to synthesize Fe-Fe2B nanocrystals via the solvothermal route.
📊
Key Findings & Data:Synthesis of Fe-Fe2B nanocrystals was carried out under Argon (Ar) gas atmosphere with aqueous solutions of FeSO4.7H2O and NaBH4 at various concentrations and reaction time.
💡
Conclusion & Impact:With 0.01 g of Fe-Fe2B catalyst in 1 % w/w NaBH4 concentration at 25 °C, the hydrogen production rate was 570 mL of H2.g-1.m-1, which reached to 1230 at 50 °C and 2700 mL at 70 °C.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fe2B · nanocrystal · solvothermal method

Abstract

In this study, iron sulfate heptahydrate (FeSO4.7H2O) and sodium borohydride (NaBH4) were used to synthesize Fe-Fe2B nanocrystals via the solvothermal route. Synthesis of Fe-Fe2B nanocrystals was carried out under Argon (Ar) gas atmosphere with aqueous solutions of FeSO4.7H2O and NaBH4 at various concentrations and reaction time. The phases and microstructures of nanocrystals thus formed were characterized by X-Ray diffraction (XRD) spectroscopy and scanning electron microscopy (SEM). Surface areas of nanocrystals were measured by a surface area and pore-size analyzer using nitrogen adsorption-desorption method together with Brunauer-Emmett-Teller (BET) equation. The vacuum dried nanoparticles were calcined under both Ar and air at 500 ºC. Nano-cylindrical structures Fe-Fe2B were observed while calcinating under Ar atmosphere; whereas more irregular shaped particles were obtained by calcination under air. The surface areas of nanocylinders were determined as 12 m2/g, 5.5 m2/g and 16.5 m2/g, for vacuum dried, Ar-calcined and O2-calcined products respectively. The catalytic effect of those nanocrystals for hydrogen generation were studied by determining reaction rates in aqueous alkaline solutions of NaBH4. Their catalytic activities were investigated by varying the amount of catalysts, and the concentrations of NaBH4 and NaOH. The effect of temperature on the catalytic activity was also studied by varying the temperatures from 25-70 °C. It was noticed that the catalytic activity of vacuum dried nanocrystals was the highest, and it decreased with the increase in NaOH concentration. With 0.01 g of Fe-Fe2B catalyst in 1 % w/w NaBH4 concentration at 25 °C, the hydrogen production rate was 570 mL of H2.g-1.m-1, which reached to 1230 at 50 °C and 2700 mL at 70 °C.

🔖

Cite This Article

BARIŞ, M., ŞİMŞEK, T., Taşkaya, H., CHATTOPADHYAY, A. K. (2018). Synthesis of Fe-Fe2B catalysts via solvothermal route for hydrogen generation by hydrolysis of NaBH4. Bor Dergisi, Cilt: 3 - Sayı: 1, 51–62. https://ajindex.com/articles/252077

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Yalaz, N., Kocakuşak, S., Kalafatoğlu, E., İnorganik bor bileşikleri kaynak araştırması metal borürler, TÜBİTAK Marmara Bilimsel ve Endüstriyel Araştırma Enstitüsü, Kocaeli, 1-84 1988
  2. Telle, R., Boride and Carbide Ceramics, Materials Science and Technology, 11, Swain, M., VCH Publishers Inc., New York, 185-229, 1994
  3. Lundstrom, T., "Structure, defects and properties of some refractory borides", Pure&Applied Chem., 57(10), 1384, 1985
  4. Schwetz, K. A., Lipp, A., Boron carbide, boron nitride, and metal borides, Ullmann's Encyclopedia of Industrial Chemistry, A4, Campbell, F. T., Pfefferkorn, R., Wiley-VCH, Weinheim, 303-306, 1985
  5. Habashi, F., Handbook of Extractive Metallurgy, Wiley-VCH, NewYork, 4, 1997
  6. Gadakary S., Khanra A. K., Veerabau R., Production of nanocrystalline TiB2 powder through self-propagating high temperature synthesis (SHS) of TiO2-H3BO3-Mg mixture, Advances in Applied Ceramics Structural, Functional and Bioceramics, Adv. Appl. Ceram., 113 (7),419-426, 2014
  7. Wei Y., Liu Z., Ran S., Xi A., Yi T. F., Ji Y., Synthesis and properties of Fe-B powders by molten salt method, J. Mater. Res., 32 (4), 28, 883-889, 2017
  8. Yin H., Tang D., Mao X., Xiao W., Wang D., Electrolytic calcium hexaboride for high capacity anode of aqueous primary batteries, J. Mater. Chem. A, 3, 15184-15189, 2015
  9. Babar S., Kumar N., Zhang P., Abelson J. R., Dunbar A. C., Daly S. R., Girolami G. S., Growth Inhibitor To Homogenize Nucleation and Obtain Smooth HfB2 Thin Films by Chemical Vapor Deposition, Chem. Mater., 25, 662-667, 2013
  10. Qiu H. Y., Guo W. M., Zou J, Zhang G. J., ZrB2 powders prepared by boro/carbothermal reduction of ZrO2: The effects of carbon source and reaction atmosphere, Powder Technol., 217, 462-466, 2012
  11. Liu Y., Geng R., Cui Y., Peng S., Chang X., Han K., Yu M., A novel liquid hybrid precursor method via sol-gel for the preparation of ZrB2 films, Mater. Des., 128, 80-85, 2017
  12. Cao Y., Zhang H., Li F., Lu L., Zhang S., Preparation and characterization of ultrafine ZrB2-SiC composite powders by a combined sol-gel and microwave boro/carbothermal reduction method, Ceram. Int., 41, 7823-7829, 2015
  13. Kudaka K., Iizumi K., Sasaki T., Okada S., Mechanochemical synthesis of MoB2 and Mo2B5, J. Alloys Compd., 315, 104-107, 2001
  14. Kelly J. P., Kanakala R., Graeve O. A., A Solvothermal Approach for the Preparation of Nanostructured Carbide and Boride Ultra-High-Temperature Ceramics, J. Am. Ceram. Soc., 93 (1