Journals / Bor Dergisi / 2018 / Cilt: 3 - Sayı: 1

Investigation of fuel cell performance of proton change membranes of boron phosphate additive PVDF/Nafıon membranes

Boron fosfat katkılı PVDf/Nafyon membranların proton değişim membranlı yakıt hücresi performansının incelenmesi

Pages
8–16
Publication Date
2018-03-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition to these properties, the 10% BPO4 doped membrane showed very good oxidative and hydrolytic stability.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, polyvinylidene fluoride (PVDF), nafion based and boron phosphate doped composite membranes were synthesized by solution casting method.
📊
Key Findings & Data:Boron phosphate was added in different ratios (0, 2, 5, 10, 15 and 25%) to the membrane for improve membrane properties such as proton conductivity and fuel cell performance.
💡
Conclusion & Impact:In addition to these properties, the 10% BPO4 doped membrane showed very good oxidative and hydrolytic stability.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Boron fosfat · poliviniliden florür · proton değişim membranlı yakıt hücresi

Abstract

In this study, polyvinylidene fluoride (PVDF), nafion based and boron phosphate doped composite membranes were synthesized by solution casting method. Boron phosphate was added in different ratios (0, 2, 5, 10, 15 and 25%) to the membrane for improve membrane properties such as proton conductivity and fuel cell performance. The synthesized membranes were characterized by water uptake capacity, swelling properties, ion exchange capacity, proton conductivity measurements, and single cell performanceanalyzes. As a result of characterization and performance experiments highest performance values are obtained for the membrane containing 10% boron phosphate. This membrane has 44.5% water uptake capacity, 8.5% change of thickness, 0.15% change of surface area, 1.87 meq/g ion exchange capacity and 0.0296 S/cm proton conductivity at 80 °C. The same membrane has 80 mA/cm2 current density and 0.048 W/cm2 power density at 80 °C cell temperature, 100% humidity and 0.6 V cell voltage. In addition to these properties, the 10% BPO4 doped membrane showed very good oxidative and hydrolytic stability.

Özet

Bu çalışmada poliviniliden florür (PVDf) ve Nafyon bazlı kompozit membranlar çözelti döküm yöntemiyle sentezlenmiştir. Proton iletkenlik ve yakıt hücresi performansı gibi membran özelliklerini arttırmak amacıyla yapıya değişen oranlarda boron fosfat (%0, 2, 5, 10, 15 ve 25) katılmıştır. Sentezlenen membranlar su tutma kapasitesi, şişme özelliği, iyon değişim kapasitesi, proton iletkenlik ölçümleri ile karakterize edilip tekli hücrede yakıt hücresi performans analizleri gerçekleştirilmiştir. %10 BPO4 katkılı membrandan diğermembranlara göre daha iyi sonuçlar elde edilmiştir. Bu membran 80 °C’de %44,5 su tutma kapasitesine, %8,5 kalınlık değişimine, %0,15 yüzey alanı değişimine, 1,87 meq/g iyon değişim kapasitesine ve 0,0296 S/cm proton iletkenliğine sahiptir. Aynı membranın 80 °C çalışma sıcaklığı, %100 nemlilik ve 0,6 V hücre potansiyelinde akım yoğunluğu değeri 80 mA/cm2, güç yoğunluğu ise 0,048 W/cm2 olarak bulunmuştur. Bu özelliklerin yanı sıra %10 BPO4 katkılı membran çok iyi oksidatif ve hidrolitik kararlılık göstermiştir. buna karşınyaprak azot ve demir içerikleri arasında ise negatif ilişkiler tespit edilmiştir.

🔖

Cite This Article

ŞAHİN, A. (2018). Investigation of fuel cell performance of proton change membranes of boron phosphate additive PVDF/Nafıon membranes. Bor Dergisi, Cilt: 3 - Sayı: 1, 8–16. https://ajindex.com/articles/252072

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Parnian M.J., Rowshanzamir S., Gashoul F., Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel cell applications, Energy, 125, 614-628, (2017).
  2. Pandey R.P., Shukla G., Manohar M., Shahi V.K., Graphene oxide based nanohybrid proton exchange membranes for fuel cell applications: An overview, Advances in Colloid and Interface Science, 240, 15-30, (2017).
  3. Diaz M., Ortiz A., Pringle J.M., Wang X., Vijayaraghavan R., MacFarlanec D.R., Forsyth M., Ortiz I., Protic plastic crystal/PVDF composite membranes for Proton Exchange Membrane Fuel Cells under non-humidified conditions, Electrochimica Acta, 247, 970-976, (2017).
  4. Kim D.J., Lee B.N., Nam S.Y., Characterization of highly sulfonated PEEK based membrane for the fuel cell application, International Journal of Hydrogen Energy, 42, 23768-23775, (2017).
  5. Martos A.M., Biasizzo M., Trotta F., Río C., Váreza A., Levenfelda B., Synthesis and characterization of sulfonated PEEK-WC-PES copolymers for fuel cell proton exchange membrane application, Eurpean Polymer Journal, 93, 390-402, (2017).
  6. Liu F., Wang S., Li J., Tian X., Wang X., Chen H., Wang Z., Polybenzimidazole/ionic-liquid-functional silica composite membranes with improved proton conductivity for high temperature proton exchange membrane fuel cells, Journal of Membrane Science, 541, 492-499, (2017).
  7. Park S.G., Chae K.J., Lee M., A sulfonated poly(atylene ether sulfone)/polyimide nanofiber composite proton exchange membrane for microbial electrolysis cell application under the coexistence of diverse competitive cations and protons, Journal of Membrane Science, 540, 165-173, (2017).
  8. Haque M.A., Sulong A.B., Loh K.S., Majlan E.H., Husaini T., Rosli R.E., Acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: A review, International Journal of Hydrogen Energy, 42, 9156-9179, (2017).
  9. Yue Z., Cai Y.B., Xu S., Phosphoric acid-doped cross-linked sulfonated poly (imide-benzimidazole) for proton exchange membrane fuel cell applications, Journal of Membrane Science, 501, 220-227, (2016).
  10. Liu H., Gong C., Wang J., Liu X., Liu H., Cheng F., Wang G., Zheng G., Qin C., Wen S., Chitosan/silica coated carbon nanotubes composite proton exchange membranes for fuel cell applications, Carbohydrate Polymers, 136, 1379-1385, (2016).
  11. Kim D.J., Choi D.H., Park C.H., Nam S.Y., C