Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2016 / Cilt: 31 - Sayı: 1

Organik Rankine Çevriminde Farklı Soğutucu Akışkanların Ekserji Analizi Üzerine Etkisinin İncelenmesi

Investigation of Different Working Fluid Effectson Exergy Analysis for Organic Rankine Cycle (ORC)

Pages
441–449
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

HFE7100 and FC72 working fluids are selected as performance parameters in order to show the effect of the working fluids on the system performance of the Organic Rankine Cycle.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, energy and exergy analyses are performed for an Organic Rankine Cycle in a local power plant that is located southern of Turkey.
📊
Key Findings & Data:The main purpose of this study is to model the ORC cycle for performance optimization in terms of the usage of two different working fluids with relevant temperature ranges.
💡
Conclusion & Impact:HFE7100 and FC72 working fluids are selected as performance parameters in order to show the effect of the working fluids on the system performance of the Organic Rankine Cycle.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, energy and exergy analyses are performed for an Organic Rankine Cycle in a local power plant that is located southern of Turkey. The Organic Rankine Cycle was used for low temperature heat source asheat recovery process with various organic working fluids. The examined system consists of an evaporator, a turbine, a condenser, a pump and a generator as components. The evaluation is carried out using two different working fluidsfor each component of the system. The main purpose of this study is to model the ORC cycle for performance optimization in terms of the usage of two different working fluids with relevant temperature ranges. HFE7100 and FC72 working fluids are selected as performance parameters in order to show the effect of the working fluids on the system performance of the Organic Rankine Cycle.

Özet

Bu çalışmada, Türkiye'nin güneyinde bulunan bir yerel güç santralindeki Organik Rankine Çevrimi için ekserji analizi yapılmıştır. Organik Rankine Çevrimi, düşük sıcaklıktaki ısı kaynağı için farklı organik soğutucu akışkanlar ile ısı geri kazanım işlemi olarak kullanılır. İncelenen sistem evaporatör, türbin, kondenser, pompa ve jeneratör bölümlerinden oluşmaktadır. Değerlendirme, her sistem bileşenine iki farklı soğutucu akışkan için yapılmıştır. Bu çalışmanın temel amacı,Organik Rankine Çevriminin performans optimizasyonunu sağlamak üzere iki farklı soğutucu akışkanınilgili sıcaklık aralıklarında kullanılarak modellenmesidir. Soğutucu akışkanların Organik Rankine Çevriminin performansı üzerine etkisini göstermek amacıyla HFE7100 ve FC72 akışkanları performans parametresi olarak seçilmiştir

🔖

Cite This Article

TÜMEN, N. Ö., TANTEKİN, A., SEĞMEN, M. (2016). Organik Rankine Çevriminde Farklı Soğutucu Akışkanların Ekserji Analizi Üzerine Etkisinin İncelenmesi. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 31 - Sayı: 1, 441–449. https://ajindex.com/articles/210268

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Tumen Ozdil N.F, Segmen M.R, Tantekin A., 2015. Thermodynamic Analysis of an Organic Rankine Cycle (ORC) Based on Industrial Data, Applied Thermal Engineering 91:43-52. Kaşka Ö., 2014. Energy and Exergy Analysis of an Organic Rankine for Power Generation from Waste Heat Recovery in Steel Industry, Energy Conversion and Management 77:108- 117. Gomez M., Garcia R., Gomez J., 2014. Thermodynamic Analysis of a Brayton Cycle and Rankine Cycle Arranged in Series Exploiting the Cold Exergy of LNG (liquefied naturel gas), Energy 66:927-937.
  2. Bao J., Zhao L., 2012. Exergy Analysis and Parameter Study on a Novel Auto-Cascade Rankine Cycle, Energy 48:539-547.
  3. Roy J.P., Mishra M.K., Misra A., 2011. Performance Analysis of an Organic Rankine Cycle with Superheating Under Different Heat Source Temperature Conditions, Applied Energy 88:2995-3004.
  4. Aghahosseini S., Dincer I., 2013. Comparative Performance Analysis of Low-Temperature Organic Rankine Cycle (ORC) Using Pure and Zeotropic Working Fluids, Applied Thermal Engineering 54:35-42.
  5. Sue D., Chuang C., 2004. Engineering Design and Exergy Analyses for Combustion Gas Turbine Based Power Generation System, Energy 29:1183-1205.
  6. Li Y.R, Wang J., Du M., 2012. Influence of Coupled Pinch Point Temperature Difference and Evaporation Temperature on Performance of Organic Rankine Cycle, Energy 42:503-509.
  7. Khaliq A., Kaushik S., 2004. Second Law Based Brayton/Rankine Combined Power Cycle with Reheat. Applied Energy 78:179-197. of Yazıcı H., Selbaş R., 2011. Buharlı Güç Santralinin Enerji ve Ekserji Analizi, Enerji 10:1. Peris B., Esbrí J., Moles F., Collado R., A Babiloni., 2015. Performance Evaluation of an Organic Rankine Cycle (ORC) for Power Applications from Low Grade Heat Sources, Applied Thermal Engineering 75:763-769.
  8. Wang J.L., Zhao L., Wang X.D., 2012. An Experimental Study on the Recuperative Low Temperature Solar Rankine Cycle Using R245fa, Applied Energy 94:34-40.
  9. Lee U., Park K., Jeong Y.S., Lee S., Han C., 2014. Design and Analysis of a Combined Rankine Cycle For Waste Heat Recovery of a Coal Power Plant Using LNG Cryogenic Exergy, Industrial & Engineering Chemistry Research 53:9812-9824.
  10. Zhu Y., Hu Z., Zhou Y., Jiang L., Yu L., 2014.
  11. Applicability of entropy, Entrancy and Exergy Analyses to the Optimization of the Organic Rankine Cycle, Energy Conversion and Management 88:267-276.
  12. Bahrami M., Hamidi A.A., Porkhial S., 2013. Investigation of the Effect of Organic Working Fluids on Thermodynamic Performance of Combine