Journals / Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering / 2018 / Cilt: 19 - Sayı: 3

Characterization of Fiber-Cement Composites Reinforced with Alternate Cellulosic Fibers

Pages
721–731
Publication Date
2018-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Physical and mechanical tests on these samples indicated that the fiber-cements produced with eucalyptus and araucaria cellulose were superior mechanically than those produced with virgin cellulose.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The eucalyptus and araucaria fibers were used as alternatives to virgin cellulose common in fiber-cement production.
📊
Key Findings & Data:In the experiments, the effect of various fiber types on the mechanical strength, water absorption and the density of fiber-cement mixture was studied for 8 wt% of these three fiber types.
💡
Conclusion & Impact:Physical and mechanical tests on these samples indicated that the fiber-cements produced with eucalyptus and araucaria cellulose were superior mechanically than those produced with virgin cellulose.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cellulosic fibers · fiber-cement · cement-based composites

Abstract

The eucalyptus and araucaria fibers were used as alternatives to virgin cellulose common in fiber-cement production. Three different types of these virgin-cellulose replacements were utilized as main raw materials while the silica sand was the aggregate. Chemical and physical analyses were performed on the raw materials. In the experiments, the effect of various fiber types on the mechanical strength, water absorption and the density of fiber-cement mixture was studied for 8 wt% of these three fiber types. The excess water in homogeneous mixtures of these raw materials was first removed and then samples were pressed and baked in the autoclave. Physical and mechanical tests on these samples indicated that the fiber-cements produced with eucalyptus and araucaria cellulose were superior mechanically than those produced with virgin cellulose.

🔖

Cite This Article

SOYDAN, A. M., SARI, A., DUYMAZ, B., AKDENİZ, R., TUNABOYLU, B. (2018). Characterization of Fiber-Cement Composites Reinforced with Alternate Cellulosic Fibers. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, Cilt: 19 - Sayı: 3, 721–731. https://ajindex.com/articles/197047

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Khorami, M. and E. Ganjian, Comparing flexural behaviour of fibre–cement composites reinforced bagasse: Wheat and eucalyptus. Construction and Building Materials, 2011. 25(9): p. 3661-3667
  2. Joshi, S.V., et al., Are natural fiber composites environmentally superior to glass fiber reinforced composites? Composites Part A: Applied Science and Manufacturing, 2004. 35(3): p. 371-376
  3. Silva, F.d.A., N. Chawla, and R.D.d.T. Filho, Tensile behavior of high performance natural (sisal) fibers. Composites Science and Technology, 2008. 68(15-16): p. 3438-3443
  4. Mwaikambo, L.Y. and M.P. Ansell, Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization. Journal of applied polymer science, 2002. 84(12): p. 2222-2234
  5. MacVicar, R., L. Matuana, and J. Balatinecz, Aging mechanisms in cellulose fiber reinforced cement composites. Cement and Concrete Composites, 1999. 21(3): p. 189-196
  6. Soroushian, P., Z. Shah, and J.P. Won, Optimization of wastepaper fiber-cement composites. Materials Journal, 1995. 92(1): p. 82-92
  7. Soroushian, P. and S. Marikunte, Reinforcement of cement-based materials with cellulose fibers. Special Publication, 1990. 124: p. 99-124
  8. Soroushian, P. and S. Marikunte, Moisture effects on flexural performance of wood fiber-cement composites. Journal of Materials in Civil Engineering, 1992. 4(3): p. 275-291
  9. Coutts, R. and M. Campbell, Coupling agents in wood fibre-reinforced cement composites. Composites, 1979. 10(4): p. 228-232
  10. Coutts, R., Flax fibres as a reinforcement in cement mortars. International Journal of Cement Composites and Lightweight Concrete, 1983. 5(4): p. 257-262
  11. Coutts, R.S., High yield wood pulps as reinforcement for cement products. Appita, 1986. 39(1): p. 31-35
  12. Soroushian, P., et al., Durability and moisture sensitivity of recycled wastepaper-fiber-cement composites. Cement and Concrete Composites, 1994. 16(2): p. 115-128
  13. Soroushian, P. and S. Marikunte. MOISTURE SENSITIVITY OF CELLULOSE FIBER REINFORCED CEMENT. IN: DURABILITY OF CONCRETE. SECOND INTERNATIONAL CONFERENCE. AUGUST 4-9, 1991, MONTREAL, CANADA. VOLUME II. in DURABILITY OF CONCRETE. SECOND INTERNATIONAL CONFERENCE. 1991
  14. Onuaguluchi, O. and N. Banthia, Plant-based natural fibre reinforced cement composites: A review. Cement and Concrete Composites, 2016. 68: p. 96-108
  15. Tonoli, G., et al., Eucalyptus pulp fibres as alternative reinforcement to engineered cement-based composites. Industrial c