SavedAdd your journal

Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2026 / Cilt: 8 Sayı: 2

Investigation of the Usability of Bilecik Region’s Waste Marble Powders in “Fiber-Cement” Production

Bilecik Yöresi Mermer Atıklarının “Fiber-Sement” Üretiminde Kullanılabilirliğinin Araştırılması

Ali Murat Soydan0000-0001-5660-1487
Abdulkadir Sarı0000-0002-6471-717X
Recep Akdeniz0000-0002-8072-0862
Pages
191–199
Publication Date
2018-06-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the physical and mechanical test results on the produced samples; it was determined that the fiber reinforced cement matrix composite (FC) sheets can be produced in their class with sufficient mechanical properties and more economically by using waste marble powder.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it was investigated the usability of waste marble powders obtained from cutting and processing of marble blocks in marble ores in Bilecik region in the production of fiber reinforced cement matrix composite (Fiber-Cement; FC) sheets.
📊
Key Findings & Data:The marble waste was added to the wt. 0-50% and the effects of mechanical properties of FC sheets were investigated.
💡
Conclusion & Impact:According to the physical and mechanical test results on the produced samples; it was determined that the fiber reinforced cement matrix composite (FC) sheets can be produced in their class with sufficient mechanical properties and more economically by using waste marble powder.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Fiber-sement · atık mermer tozu · elyaf takviyeli çimento kompozit.

Abstract

In this study, it was investigated the usability of waste marble powders obtained from cutting and processing of marble blocks in marble ores in Bilecik region in the production of fiber reinforced cement matrix composite (Fiber-Cement; FC) sheets. Cement, silica sand, waste marble powder, and cellulose were used as main raw materials for the production of FC sheets. The chemical and physical properties of these raw materials such as chemical composition and grain size, respectively, and their effects on FC were investigated. The marble waste was added to the wt. 0-50% and the effects of mechanical properties of FC sheets were investigated. According to the physical and mechanical test results on the produced samples; it was determined that the fiber reinforced cement matrix composite (FC) sheets can be produced in their class with sufficient mechanical properties and more economically by using waste marble powder.

Özet

Bu çalışmada, Bilecik bölgesinde bulunan mermer yataklarındaki mermer blokların kesilip, işlenmesi

🔖

Cite This Article

Soydan, A. M., Sarı, A., Akdeniz, R. (2018). Investigation of the Usability of Bilecik Region’s Waste Marble Powders in “Fiber-Cement” Production. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 8 Sayı: 2, 191–199. https://doi.org/10.21597/jist.428375

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (18)

  1. Alyamac KE, Ghafari E, Ince R, 2017. Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method. Journal of Cleaner Production, 144, 192-202.
  2. Çetin T, 2003. Türkiye mermer potansiyeli, üretimi ve ihracatı. Gazi Üniversitesi Gazi Eğitim Fakültesi Dergisi, 23 (3), 243-256.
  3. Ceylan H, Mança S, 2013. Mermer parça atıklarının beton agregası olarak değerlendirilmesi. SDU Teknik Bilimler Dergisi, 3 (2), 21-25.
  4. Ceylan H, Saraç S, Özkahraman T, 2001. Mermer toz atıklarının derz dolgu malzemesi (fuga) üretiminde kullanılabilirliğinin araştırılması. Türkiye III. Mermer Sempozyumu (Mersem 2001) Bildiriler Kitabı, 3-5.
  5. Demir İ, Başpınar M, 2003. Mermer tozu atıklarının (havuz çözeltisi) hafif yapı blokları üretiminde kullanılması. Türkiye IV. Mermer Sempozyum (Mersem 2003) Bildiriler Kitabı, 18-19.
  6. Filiz M, Özel C, Soykan O, Ekiz Y, 2010. Atık mermer tozunun parke taşlarında kullanılması. Electronic Journal of Construction Technologies/Yapı Teknolojileri Elektronik Dergisi, 6 (2), 57-72.
  7. International Organization for Standardization (ISO), 2001. Determination of drainability part 2: “Canadian standard” freeness method. ISO 5267-2:2001. Standard handbook; paper, board and pulps. International Organization for Standardization, Geneva.
  8. Jarabo R, Fuente E, Monte MC, Savastano Jr H, Mutjé P, Negro C, 2012. Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product properties. Industrial Crops and Products, 39, 89-96.
  9. Kacir S, 2017. Bilecik mermer sektörü raporu, Bursa Eskişehir Bilecik Kalkınma Ajansı (BEBKA), Bursa.
  10. Kara C, Yazicioglu S, 2016. Mermer tozu atığı ve silis dumanının betonun karbonatlaşma özelliğine etkisi. Journal of Science, 5 (2), 191-202.
  11. Khorami M, Ganjian E, 2011. Comparing flexural behaviour of fibre–cement composites reinforced bagasse: Wheat and eucalyptus. Construction and Building Materials, 25, 3661-3667. Kore SD, Vyas A, 2016. Impact of marble waste as coarse aggregate on properties of lean cement concrete. Case Studies in Construction Materials, 4, 85-92.
  12. Rashid RA, Shamsudin R, Hamid MAA, Jalar A, 2014. Low temperature production of wollastonite from limestone and silica sand through solid-state reaction. Journal of Asian Ceramic Societies, 2, 77-81.
  13. Singh M, Srivastava A, Bhunia D, 2017. An investigation on effect of partial replacement of cement by waste marble slurry. Construction and Building Materials, 134, 471-488.
  14. Singh R, Bhutani M, Syal T, 2015. Strength evaluation of concrete using marble powder and waste crushed tile aggregates. International Journal for Science and Emerging Technologies with Latest Trends, 20, 18-28.
  15. Sutcu M, Alptekin H, Erdogmus E, Er Y, Gencel O, 2015. Characteristics of fired clay bricks with waste marble powder addition as building materials. Construction and Building Materials, 82, 1-8.
  16. Talah A, Kharchi F, Chaid R, 2015. Influence of marble powder on high performance concrete behavior. Procedia Engineering, 114, 685-690.
  17. TAPPI, 1999. T. 227 om-94–Freeness of pulp (Canadian standard method). TAPPI Testing Methods, TAPPI Press. TS EN 12467, ICS 91.100.40, 2007. Düz levhalar – elyaf takviyeli çimento kullanılarak imal edilmiş – mamul özellikleri ve deney metotları. Ünal O, Kibici Y, 2001. Mermer tozu atıklarının beton üretiminde kullanılmasının araştırılması. Türkiye III. Mermer Sempozyumu, Afyon, Türkiye, Bildiriler Kitabı, 317-325.
  18. Yıldız Ö, Eskikaya Ş, 1995. Afyon mermerleri toz artıklarının değerlendirilmesi. Türkiye I. Mermer Sempozyumu Kitabı, 45-52.