Journals / JAREM / 2018 / Cilt: 18 - Sayı: 3

Assessment of the Accuracy of Obturator Bulbs that are Produced by Using Cone Beam Computed Tomography and Stereolithography in Maxilloctemy Defects: An Ex Vivo Study

Maksillektomi Defektlerinde Konik Işınlı Bilgisayarlı Tomografi ve Steriolitografi Kullanılarak Üretilen Obturatör Bulblarının Doğruluğunun Değerlendirilmesi: Ex Vivo Çalışma

Journal
JAREM
Pages
186–190
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Conclusion: The production of obturator bulbs that fit into maxillary defects using 3D models created from CBCT images seems to be an achievable task.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objective: We aimed to use cone-beam computed tomography (CBCT) as an alternative to conventional impression techniques in intraoral maxillectomy defects and to assess the volumetric accuracy of the obturator bulb sections placed in the defect area of obturator prosthesis fabricated using stereolithography.
📊
Key Findings & Data:Methods: The artificial defects created in human cadaver maxilla (n=9) were scanned with CBCT.
💡
Conclusion & Impact:Conclusion: The production of obturator bulbs that fit into maxillary defects using 3D models created from CBCT images seems to be an achievable task.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Objective: We aimed to use cone-beam computed tomography (CBCT) as an alternative to conventional impression techniques in intraoral maxillectomy defects and to assess the volumetric accuracy of the obturator bulb sections placed in the defect area of obturator prosthesis fabricated using stereolithography. Methods: The artificial defects created in human cadaver maxilla (n=9) were scanned with CBCT. Total slices were captured and stored as digital imaging and communications in medicine (DICOM) images Thereafter, the images were imported and processed with Mimics Software (Mimics Innovation Suite, Materialize, Leuven, Belgium). From the DICOM images, 3D volumetric data of craniofacial hard and soft tissue were then segmented. Thereafter, the hard tissue and soft tissue data were imported into 3-MATIC software module where in virtual models were created and obturator bulb models were designed for maxillary defects considering defect surface borders. The production of obturator bulbs was conducted using a stereolithography device after 3D volumetric images were converted to stl. file format. A physical model of the defect was obtained using an A-type silicon impression material that represents the origins of the borders of the defects. The water displacement technique was used to measure silicon and resin bulb volumes. Data were sent to Minitab Release 15 statistical software program. One-way ANOVA was used to compare volumetric measurements obtained using the two techniques. Statistical significance was set at p 0.05). Conclusion: The production of obturator bulbs that fit into maxillary defects using 3D models created from CBCT images seems to be an achievable task.

Özet

Amaç: Çalışmamızda, intraoral maksillektomi defektlerinde konvansiyonel ölçü tekniğine alternatif olarak konik ışınlı bilgisayarlı tomografinin (KIBT) kullanılması ve stereolitografi ile de obturatör protezlerinin defekt bölgesine yerleşen bulb bölümlerinin üretilerek doğruluklarının hacimsel olarak değerlendirilmesi amaçlanmıştır. Yöntemler: İnsan kadavra maksillalarında (n=9) oluşturulan yapay defektlerden KIBT cihazı ile elde edilen DICOM dosya formatındaki 2 boyutlu görüntü kesitlerinin MIMICS yazılımı ile 3 boyutlu rekonstrüksiyonları yapılmıştır. Ardından sert doku ve yumuşak doku datası yazılımın tasarım modülü 3-MATIC içerisine aktarılarak sanal modeller oluşturulmuş ve maksiller defektler için defekt yüzey sınırları baz alınarak obturatör bulb modelleri tasarlanmıştır. 3 boyutlu volümetrik görüntüler stl dosya formatına dönüştürüldükten sonra stereolitografi cihazında obturatör bulblarının üretimi gerçekleştirilmiştir. Defektin fiziksel modeli ise A tip silikon ölçü materyali ile defekt başlangıç sınırları baz alınarak elde edilmiştir. Silikon ve rezin bulbların hacimleri su deplasman tekniği ile ölçülmüştür. İstatistiksel analiz için veriler, Minitab Release 15 istatistiksel yazılım programına aktarılmıştır. Tek yönlü varyans analizi ile 2 teknik arasındaki hacimsel sapmalar kıyaslanmıştır Anlamlılık p 0,05). Sonuç: Maksillektomi defektlerinde KIBT görüntülerinin kullanılması ile oluşturulan 3D modellemeler ile defektle uyumlu obturatörlerin/bulbların üretilmesi mümkün gözükmektedir.

🔖

Cite This Article

MURAT, S. (2018). Assessment of the Accuracy of Obturator Bulbs that are Produced by Using Cone Beam Computed Tomography and Stereolithography in Maxilloctemy Defects: An Ex Vivo Study. JAREM, Cilt: 18 - Sayı: 3, 186–190. https://ajindex.com/articles/196329

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Beumer J, Curtis TA. Restoration of acquired hard palate defects. In Beumer J, Curtis TA, Marunick M, editors. Maxillofacial rehabilitation: prosthodontic and surgical considerations. 1 st ed. St Louis: Ishiyaku EuroAmerica; 1996.p.226-329
  2. Alharbi N, Wismeijer D, Osman RB. Additive Manufacturing Techniques in Prosthodontics: Where Do We Currently Stand? A Critical Review. Int J Prosthodont 2017; 30: 474-84. [CrossRef] 3. Sun J, Zhang FQ. The application of rapid prototyping in prosthodontics. J Prosthodont 2012; 21: 641-4. [CrossRef] 4. Peng Q, Tang Z, Liu O, Peng Z. Rapid prototyping-assisted maxillofacial reconstruction. Ann Med 2015; 47: 186-208. [CrossRef] 5. Ciocca L, Scotti R. CAD-CAM generated ear cast by means of a laser scanner and rapid prototyping machine. J Prosthed Dent 2004; 92: 591-5. [CrossRef] 6. Karayazgan-Saracoglu B, Gunay Y, Atay A. Fabrication of an auricular prosthesis using computed tomography and rapid prototyping technique. J Craniofac Surg 2009; 20: 1169-72. [CrossRef] 7. Liacouras P, Garnes J, Roman N, Petrich A, Grant GT. Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. J Prosthet Dent 2011; 105: 78-82. [CrossRef] 8. Nuseir A, Hatamleh M, Watson J, Al-Wahadni AM, Alzoubi F, Murad M. Improved Construction of Auricular Prosthesis by Digital Technologies. J Craniofac Surg 2015; 26: 502-5. [CrossRef] 9. Dos Santos DM, de Caxias FP, Bitencourt SB, Turcio KH, Pesqueira AA, Goiato MC. Oral rehabilitation of patients after maxillectomy. A systematic review. Br J Oral Maxillofac Surg 2018; 56: 256-66. [CrossRef] 10. Scarfe WC, Farman AG, Sukoviç P: Clinical app¬lications of Cone- Beam Computed Tomography in dental practice. J Can Dent Assoc 2006; 72: 75-80
  3. Kamburoğlu K. Use of dentomaxillofacial cone beam computed tomography in dentistry. World J Radiol 2015; 7: 128-30. [CrossRef] 12. Fourie Z, Damstra J, Gerrits PO, Ren Y. Accuracy and repeatability of anthropometric facial measurements using cone beam computed tomography. Cleft Palate Craniofac J 2011; 48: 623 30. [CrossRef] 13. Michelinakis G. The use of cone beam computed tomography and three dimensional printing technology in the restoration of a maxillectomy patient using a dental implant retained obturator. J Indian Prosthodont Soc 2017;17: 406-11. [CrossRef] 14. Tasopoulos T, Kouveliotis G, Polyzois G, Karathanasi V. Fabrication of a 3D Printing Definitive