SavedAdd your journal

Journals / European Journal of Technique / 2019 / Cilt: 9 - Sayı: 2

EFFECT OF FORMING HISTORY ON CRASHWORTHINESS OF A SPOT-WELDED AND DOUBLE-HAT ELLIPTICAL THIN-WALLED TUBE

Serkan ÖZEL
Hüseyin BEYTÜT
Selçuk KARAGÖZ
Pages
275–285
Publication Date
2019-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the forming history has effect on the crashworthiness of the tube.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Thin-walled structures (TWTs) are widely used in automotive and aerospace industries due to their easy formability, high energy absorption capacity, low cost and lightweight advantages.
📊
Key Findings & Data:With deep drawing results mapped to the tube, energy absorption decreased by 5.218% and peak crushing force decreased by 3.614%.
💡
Conclusion & Impact:The results showed that the forming history has effect on the crashworthiness of the tube.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Crashworthiness · Thin-Walled Tubes · Forming History

Abstract

Thin-walled structures (TWTs) are widely used in automotive and aerospace industries due to their easy formability, high energy absorption capacity, low cost and lightweight advantages. In this study, under dynamic axial load, the crashworthiness of spot-welded and double-hat shaped elliptical TWT was investigated by the finite element method (FEM). In addition, bead-shaped trigger mechanism was added to the TWT to reduce the peak crushing force. Changes in wall thickness (thickening or thinning of some elements), plastic strain and work hardening may occur during forming. In order to investigate the effect of the forming history on crashworthiness, the TWT was formed by single-acting deep drawing using FEM and results were mapped. The results showed that the forming history has effect on the crashworthiness of the tube. With deep drawing results mapped to the tube, energy absorption decreased by 5.218% and peak crushing force decreased by 3.614%. RADIOSS/explicit and nonlinear FE codes were used.

🔖

Cite This Article

ÖZEL, S., BEYTÜT, H., KARAGÖZ, S. (2019). EFFECT OF FORMING HISTORY ON CRASHWORTHINESS OF A SPOT-WELDED AND DOUBLE-HAT ELLIPTICAL THIN-WALLED TUBE. European Journal of Technique, Cilt: 9 - Sayı: 2, 275–285. https://ajindex.com/articles/192765

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Abramowicz, W. and N. Jones,(1984) Dynamic axial crushing of square tubes. International Journal of Impact Engineering. 2(2): p. 179-208,
  2. Alexander, J.M.,(1960) An approximate analysis of the collapse of thin cylindrical shells under axial loading. The Quarterly Journal of Mechanics and Applied Mathematics. 13(1): p. 10-15,
  3. Pugsley, A.,(1960) The large-scale crumpling of thin cylindrical columns. The Quarterly Journal of Mechanics and Applied Mathematics. 13(1): p. 1-9,
  4. Wierzbicki, T. and W. Abramowicz,(1983) On the Crushing Mechanics of Thin-Walled Structures. Journal of Applied Mechanics-Transactions of the Asme. 50(4a): p. 727-734,
  5. Li, Z.G., H.F. Yang, X.W. Hu, J.F. Wei, and Z.T. Han,(2018) Experimental study on the crush behavior and energy-absorption ability of circular magnesium thin-walled tubes and the comparison with aluminum tubes. Engineering Structures. 164: p. 1-13
  6. Mamalis, A.G., D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos, and G. Hassiotis,(2001) Finite element simulation of the axial collapse of thin-wall square frusta. International Journal of Crashworthiness. 6(2): p. 155-164,
  7. Nia, A.A. and J.H. Hamedani,(2010) Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries. Thin-Walled Structures. 48(12): p. 946-954
  8. Sun, G.Y., Z. Wang, H. Yu, Z.H. Gong, and Q. Li,(2019) Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures. Composite Structures. 209: p. 535-547, doi:10.1016/j.compstruct.2018.10.051. Tarlochan, F., F. Samer, A.M.S. Hamouda, S. Ramesh, and K. Khalid,(2013) Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces. Thin-Walled Structures. 71: p. 7-17, doi:10.1016/j.tws.2013.04.003. Zheng, G., S.Z. Wu, G.Y. Sun, G.Y. Li, and Q. Li,(2014) Crushing analysis of foam-filled single and bitubal polygonal thin-walled tubes. International Journal of Mechanical Sciences. 87: p. 226-240,
  9. Andrews, K.R.F., G.L. England, and E. Ghani,(1983) Classification of the Axial Collapse of Cylindrical-Tubes under Quasi-Static Loading. International Journal of Mechanical Sciences. 25(9-10): p. 687-696,
  10. Abramowicz, W. and N. Jones,(1997) Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically. International Journal of Impact Engineering. 19(5-6): p. 415-437,
  11. Lima, R.M., Z.N. Ismarrubie, E.S. Zainudin, and S.H. Tang,(2012)