Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2018 / Cilt: 33 - Sayı: 3

Effect of Selected Cross-section Geometry on the Seismic Performance of Concrete Gravity Dams

Beton Ağırlık Barajların Sismik Performanslarına Seçilen Kesit Geometrisinin Etkisi

Pages
81–92
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the analysis results, it was observed that Section K3 produced the most favorable results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effect of section geometry on the seismic performance of concrete gravity dams was investigated.
📊
Key Findings & Data:For this purpose, six different cross-sectional geometries widely-used at the design phase of concrete gravity dams were selected and the numerical models were adapted to the Gunduzler, Naras and Andiraz dams.
💡
Conclusion & Impact:According to the analysis results, it was observed that Section K3 produced the most favorable results.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the effect of section geometry on the seismic performance of concrete gravity dams was investigated. For this purpose, six different cross-sectional geometries widely-used at the design phase of concrete gravity dams were selected and the numerical models were adapted to the Gunduzler, Naras and Andiraz dams. Thus, the effect of section geometry on the seismic demands have been examined without changing the variables used during the actual design. Equal amounts of material were used in all of the selected sections. So, it was investigated which section type allowed the most optimal use of the material. Acoustic fluid elements were utilized for simulating the interaction between the reservoir and the dam body. The numerical models were analyzed under the effect of three different earthquake scenarios. According to the analysis results, it was observed that Section K3 produced the most favorable results.

Özet

Bu çalışmada, kesit geometrilerinin beton ağırlık barajların sismik performanslarına etkisi incelenmiştir. Bu amaçla, beton ağırlık barajların tasarımı aşamasında kullanılagelen altı farklı kesit geometrisi seçilmiş ve oluşturulan numerik modeller üç farklı yüksekliğe sahip Gündüzler, Naras ve Andıraz barajlarına uyarlanmıştır. Böylece tasarım aşamasında kullanılan değişkenleri değiştirmeksizin, kesit geometrilerinin barajların sismik taleplerine etkisi incelenmiştir. Seçilen kesitlerin tamamında eşit miktarda malzeme kullanılmıştır. Böylelikle hangi kesit tipinin malzemeyi en optimum şekilde kullanmaya izin verdiği araştırılmıştır. Numerik modellerde rezervuar etkileşimi için akustik akışkan elemanlar kullanılmıştır. Modeller üç adet deprem senaryosuna tabi tutulmuştur. Yapılan analiz sonuçlarına göre Kesit K3’ün en elverişli sonuçları ürettiği gözlemlenmiştir.

🔖

Cite This Article

ALDEMİR, A. (2018). Effect of Selected Cross-section Geometry on the Seismic Performance of Concrete Gravity Dams. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 33 - Sayı: 3, 81–92. https://ajindex.com/articles/164864

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Binici, B., Aldemir, A., 2014. Analitik Modellerin Beton Ağırlık Baraj Sismik Davranışını Taklit Etmekteki Verimliliğinin İrdelenmesi, 4. Ulusal Baraj Güvenliği Sempozyumu, 9–11 Ekim 2014,
  2. Elazığ. Medina F., Dominguez, J., 1989. Boundary Elements for the Analysis of the Seismic Response of Dams Including Dam-Water-Foundation Interaction Effects, Engineering Analysis with Boundary Elements 6(3), 152-157.
  3. Chopra, A.K., Wang, J., 2008. Analysis and Response of Concrete Arch Dams including Dam-Water-Foundation Rock Interaction to Spatially-Varying Ground Motions, Rapor No. UCB/EERC-2008-03, Earthquake Engineering Research Center, University of California, Berkeley, Kaliforniya. Westergaard, H.M., 1933. Water Pressures on Dams during Earthquakes, Transactions of the American Society of Civil Engineers 98, 418–433.
  4. Kuo, J.S., 1982. Fluid Structure Interactions: Added Mass Computations for Incompressible Fluid, Rapor No. UCB/EERC-82/09, Earthquake Engineering Research Center, University of California, Berkeley, Kaliforniya. Chopra, A.K., 1970. Earthquake Response of Concrete Gravity Dams, Journal of Engineering Mechanics ASCE, 96(4), 443-454.
  5. Dasgupta, G., Chopra, A.K., 1979. Dynamic Stiffness Matrices for Viscoelastic Half Planes, Journal of Engineering Mechanics ASCE 105(5), 729-745.
  6. Fenves, G., Chopra, A.K., 1984. EAGD-84: A Computer Program for Earthquake Response Analysis of Concrete Gravity Dams, Rapor No: UCB/EERC-734, Earthquake Engineering Research Center, University of California, Berkeley, Kaliforniya. Fok, K.L., Hall, J.F., Chopra, A.K., 1986. EACD 3D:A Computer Program for Three-Dimensional Earthquake Analysis of Concrete Dams, Rapor No. UCB/EERC-86/09, Earthquake Engineering Research Center, University of California, Berkeley, Kaliforniya. Tan, H., Chopra, A.K., 1995. Earthquake Analysis and Response of Concrete Arch Dams, Rapor No. UCB/EERC-95/07, Earthquake Engineering Research Center, University of California, Berkeley, Kaliforniya. Chopra, A.K., Wang, J., 2008. Analysis and Response of Concrete Arch Dams Including Dam-water-foundation Rock Interaction to Spatially-varying Ground Motions, Rapor No. UCB/EERC-2008-03, Earthquake Engineering Research Center, University of California, Berkeley, Kaliforniya. Fenves, G., Chopra, A.K., 1985. Simplified Earthquake Analysis of Concrete Gravity Dams: Seperate Hydrodynamic and Foundation Interaction Effects, Journal of Engineering Mechanics ASCE 111(6), 715-735.
  7. Fenves, G., Chopra, A.K., 1985. Simplified Ea