Journals / Textile and Apparel / 2026 / Volume: 17 Issue: 2

FAILURE MODE AND EFFECT ANALYSIS IN CLOTHING PRODUCTION

KONFEKSİYON ÜRETİMİNDE HATA TÜRÜ VE ETKİLERİ ANALİZİ

Pages
—
Publication Date
2007-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Additionally, 966.3 minutes shortage was provided in the fault repairing time

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Although the increasing automation, human factor is of big importance in the clothing sector.
📊
Key Findings & Data:In this study application of failure mode and effect analysis that is used for defining the potential fault types and to decrease the negative effect on production systems were carried out in a selected clothing factory.
💡
Conclusion & Impact:Additionally, 966.3 minutes shortage was provided in the fault repairing time
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Failure Mode and Effect Analysis · Clothing · Seam Faults

Abstract

Although the increasing automation, human factor is of big importance in the clothing sector. For this reason, faults made from human are observed in the clothing production. In this study application of failure mode and effect analysis that is used for defining the potential fault types and to decrease the negative effect on production systems were carried out in a selected clothing factory. Failure mode and effect analysis team was established to determine the causes of fault. The team was decided to eliminate the seam fault in the production lines. In the result of this technique, it was obtained % 4.1 decrease of seam fault in the trouser production line and % 5.2 decrease of seam fault in the shirt production line. Additionally, 966.3 minutes shortage was provided in the fault repairing time

Özet

Konfeksiyon üretimi artan otomasyona rağmen emek yoğun yapısını korumaktadır. Bu durun insan kaynaklı hataların oluşumuna da olanak sağlayabilmektedir. Bu çalışmada bir tür hata belirleme ve önceliklerine göre derecelendirme yöntemi olan hata türü ve etki analizi (HTEA) yöntemi açıklanarak bir konfeksiyon işletmesindeki uygulaması analiz edilmiştir. İşletmede HTEA ekibi oluşturulmuş ve işletme içersinde hata üreten faktörler belirlenmiştir. Bu faktörlerden dikim hatalarının giderilmesi, öncelikli giderilecek hata olarak kararlaştırılmıştır. Dikim hatalarını gidermeye yönelik HTEA sistematiği uygulanmıştır. Uygulamanın sonuçları 12 haftalık üretim sürecinde izlenmiştir. İşletmenin jean pantolon üretim hattında % 4,1’lik gömlek üretim hattında ise % 5,2’lik bir dikim hatası azalması sağlanmıştır. Ayrıca, hata giderme zamanında ise 966,3 dakikalık bir kazanç elde edilmiştir

🔖

Cite This Article

Yücel, Ö. (2007). FAILURE MODE AND EFFECT ANALYSIS IN CLOTHING PRODUCTION. Textile and Apparel, Volume: 17 Issue: 2. https://ajindex.com/articles/1640722

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Erginel, N.M., “Tasarım Hata Türü ve Etkileri Analizinin Etkinliği İçin Bir Model Ve Uygulaması” Endüstri Mühendisliği Dergisi, Cilt 5, Sayı 3, s 17-26, 2004
  2. Besterfield, D, “Total Quality Management” Second Edition, Prentice Hall, USA 1999.
  3. Yılmaz, B. S., “Hata Türü ve Etki Analizi” DEÜ Sosyal Bilimler Enstitüsü Dergisi, Cilt 2, Sayı 4, s 133-150, 2000.
  4. http:// www.fmeca.com (Erişim: 02.03.2006)
  5. Bilgin, M. “Tasarımda Kalite ve FMEA Metodu” Yayınlanmamış Yüksek Lisans Tezi, İTÜ, Fen Bilimleri Enstitüsü, İstanbul, 2004.
  6. MPM-REFA, “İş Etüdü ve Yöntem Bilgisi” Kitap 2, Veri Saptama, 1988.
  7. http:// www.fmeca.com (Erişim: 02.03.2006)