SavedAdd your journal

Journals / Textile and Apparel / 2026 / Volume: 20 Issue: 4

OPTIMIZATION OF BURSTING STRENGTH OF SINGLE JERSEY FABRICS WITH TAGUCHI ORTHOGONAL DESIGN

SÜPREM KUMAŞLARDA PATLAMA MUKAVEMETİ DEĞERİNİN TAGUCHI ORTOGONAL DİZAYNA GÖRE OPTİMİZASYONU

Serin Mezarcıöz
R. Tuğrul Oğulata
Pages
—
Publication Date
2010-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the case of full factorial design, it is necessary to perform 27 experiments to find out the optimum configuration but by using Taguchi approach, this was lower to 9 experiments

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it was aimed to optimize the bursting strength of single jersey fabrics with Taguchi orthogonal design.
📊
Key Findings & Data:The experiments were performed by using L9 orthogonal matrix with respect to Taguchi approach.
💡
Conclusion & Impact:In the case of full factorial design, it is necessary to perform 27 experiments to find out the optimum configuration but by using Taguchi approach, this was lower to 9 experiments
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Single jersey fabric · Knitted fabric · Bursting strength

Abstract

In this study, it was aimed to optimize the bursting strength of single jersey fabrics with Taguchi orthogonal design. The experiments were performed by using L9 orthogonal matrix with respect to Taguchi approach. Analysis of variance (ANOVA) and signal/noise ratio were used to evaluate the experiment results. In the case of full factorial design, it is necessary to perform 27 experiments to find out the optimum configuration but by using Taguchi approach, this was lower to 9 experiments

Özet

Bu çalışmada Taguchi ortogonal dizayna göre süprem kumaşların patlama mukavemeti değerinin optimizasyonu amaçlanmıştır. Taguchi tasarımına göre deneyler, L9 ortogonal dizaynına göre 9 adet deneme ile gerçekleştirilmiştir. Deney sonuçlarının değerlendirilmesinde varyans analizi ve sinyal/gürültü oranı kullanılmıştır. Tam faktöriyel deney tasarımında gereken deney sayısının sadece üçte biri ile (27 yerine 9 deney) hedeflenen sonuçların elde edilmesi mümkün olmuştur

🔖

Cite This Article

Mezarcıöz, S., Oğulata, R. T. (2010). OPTIMIZATION OF BURSTING STRENGTH OF SINGLE JERSEY FABRICS WITH TAGUCHI ORTHOGONAL DESIGN. Textile and Apparel, Volume: 20 Issue: 4. https://ajindex.com/articles/1640563

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...