SavedAdd your journal

Journals / Textile and Apparel / 2026 / Volume: 21 Issue: 4

A STUDY ON THE PROCESS PARAMETERS OF DISCHARGE PRINTING OF COTTON FABRICS

Arzu Yavaş(PAMUKKALE ÜNİVERSİTESİ)
Arif Özgüney(EGE ÜNİVERSİTESİ)
Ahmet Çay(EGE ÜNİVERSİTESİ)
Burçin Eser(EGE ÜNİVERSİTESİ)
Pages
—
Publication Date
2011-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Furthermore, the effects of the softeners on the discharge printing results were also investigated in the scope of the study.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Discharge printing of cotton fabrics with sodium- and zinc formaldehyde sulphoxylate with different fixation conditions was discussed in this study.
📊
Key Findings & Data:Superheated steam, saturated steam and thermofixation were used for fixation processes.
💡
Conclusion & Impact:Furthermore, the effects of the softeners on the discharge printing results were also investigated in the scope of the study.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Discharge printing · Fixation · Strength loss

Abstract

Discharge printing of cotton fabrics with sodium- and zinc formaldehyde sulphoxylate with different fixation conditions was discussed in this study. Superheated steam, saturated steam and thermofixation were used for fixation processes. It was observed that steam based fixations resulted in the higher discharging effects, while thermofixation lead to an inadequate effect even in higher temperatures. Superheated steam was found to be advantageous in terms of lower fixation times. Sodium formaldehyde sulphoxylate gave superior discharging effects compared with zinc formaldehyde sulphoxylate, which caused higher strength loss especially in superheated steam fixation. Furthermore, the effects of the softeners on the discharge printing results were also investigated in the scope of the study.

🔖

Cite This Article

Yavaş, A., Özgüney, A., Çay, A., Eser, B. (2011). A STUDY ON THE PROCESS PARAMETERS OF DISCHARGE PRINTING OF COTTON FABRICS. Textile and Apparel, Volume: 21 Issue: 4. https://ajindex.com/articles/1640504

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Dawson T.L. and Hawkyard C.J., 2000, “A new millenium of textile printing”, Review of Progress in Coloration, Vol: 30, pp: 7-19.
  2. El-Thalouth I.A., Kantouch F., Nassar S.H., El-Hennawi H.M. and Youssef M.A., 2008, “Ecofriendly discharge printing on cotton fabrics using laccase enzyme”, Indian Journal of Fibre & Textile Research, Vol: 33, pp: 52-57.
  3. Bellini P., Bonetti F., Franzetti E., Rosace G. and Vago S., 2002, Reference Books of Textile Technologies: Finishing, Italian Association of Textile Machinery Producers (ACIMIT), Milan, 3rd Edition.
  4. Glover B., 2005, “Reactive dyes for textile printing”, Colourage, Vol: 52, pp: 67-81.
  5. Berry C. and Ferguson J.G., 1994, “Discharge, Resist and Special Styles” (Chapter 6) in, Miles LWC, Textile Printing, Society of Dyers and Colourists, England, 2nd Edition.
  6. Lewis D.M., 1992, Wool Dyeing, Society of Dyers and Colourists, England, pp: 345-346.
  7. Rouette H.K., 1995, Lexikon für Textilveredlung, Laugmann-Verlag, Dülmen, Germany.
  8. Tomasino C., 1992, Chemistry & Technology of Fabric Preparation & Finishing, NCSU Raleigh, North Carolina, USA, pp: 134-153.
  9. Özgüney A.T. and Özkaya K., 2008, “Effects of the softeners on the colour change which occurs during the curing of cotton fabric in screen printing conditions”, Tekstil ve Konfeksiyon, Vol: 18(2), pp: 121-129.
  10. Gokulnathan S. and Thomas P.T., 2005, “Organomodification of Silicones for Textile Applications”, Colourage, Vol: 2, pp: 47-50.