Journals / Textile and Apparel / 2026 / Volume: 25 Issue: 4

INFLUENCE OF K 4FE (CN) 6 ON ELECTROLESS COPPER PLATED POLYESTER FABRIC USING GLYOXYLIC ACID AS A REDUCING AGENT

GLİOKSİLİK ASİDİN İNDİRGEN OLARAK KULLANILDIĞI ELEKTROSUZ BAKIR KAPLANMIŞ POLİESTER KUMAŞLARDA POTASYUM FERROSİYANATIN ETKİSİ

Wenfeng Qın(Civil Aviation Flight University of China, Aviation Engineering Institute)
Ronghui Guo(College of Light Industry, Textile and Food Engineering, Sichuan University)
Pages
—
Publication Date
2015-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the deposition rate significantly decreased with the rise of the concentration of K4 Fe (CN)6 and the copper deposits became more compact and smoother.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, electroless copper plating on polyester fabric using glyoxylic acid and potassium ferrocyanide (K4Fe (CN) 6) as reducing agent and brightener agent, respectively.
📊
Key Findings & Data:Influence of concentration of potassium ferrocyanide (K4Fe (CN) 6) in the plating solution on the deposited rate, morphology and surface resistance of copper plated polyester fabrics were studied.
💡
Conclusion & Impact:It was found that the deposition rate significantly decreased with the rise of the concentration of K4 Fe (CN)6 and the copper deposits became more compact and smoother.
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Glyoxalic acid · electroless · copper

Abstract

In this study, electroless copper plating on polyester fabric using glyoxylic acid and potassium ferrocyanide (K4Fe (CN) 6) as reducing agent and brightener agent, respectively. Influence of concentration of potassium ferrocyanide (K4Fe (CN) 6) in the plating solution on the deposited rate, morphology and surface resistance of copper plated polyester fabrics were studied. It was found that the deposition rate significantly decreased with the rise of the concentration of K4 Fe (CN)6 and the copper deposits became more compact and smoother. The copper coating on the fabric exhibited a face centered cubic crystal structure. The surface electrical resistance of the obtained copper plated fabric was 13.8 mΩ/sq when 20 mg/L K4Fe(CN)6 was added in the plating solution. The copper plated fabric possesses excellent electrical conductivity

🔖

Cite This Article

Qın, W., Guo, R. (2015). INFLUENCE OF K 4FE (CN) 6 ON ELECTROLESS COPPER PLATED POLYESTER FABRIC USING GLYOXYLIC ACID AS A REDUCING AGENT. Textile and Apparel, Volume: 25 Issue: 4. https://ajindex.com/articles/1640373

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (25)

  1. M.W.Wang, T.Y. Liu, D.C. Pang, J.C.Hung and C.C.Tseng, Surf. Coat. Tech.,340, 259 (2014).
  2. R.Brüning, A. Sibley, T. Sharma, D. Brown, T. Demay, F.Brüning and T.Bernhard, Thin Solid Films,136,565(2014).
  3. S. Palamutcu, A. Ozek, C. Karpuz, TEKST KONFEKSIYON, 20, 199(2010).
  4. T. Anik, A. E. Haloui, M. E. Touhami, R. Touir, H. Larhzil, M. Sfaira and M. Mcharfi, Surf. Coat. Tech.,22, 245 (2014).
  5. X. L.Yuan, J. Gao, Z. F. Yang, Z. X. Wang and Z. L. Wang,Surf.Eng.,377,28(2012).
  6. A. Vaskelis, R. Juskenas, J. Jaciauskiene, Electrochim. Acta, 43,1061 (1998).
  7. M. Sone, K. Kobayakawa, M. Saitou, Y. Sato, Electrochim. Acta, 49, 233 (2004).
  8. C.H. Lee, J.J. Kim, J. Vac. Sci. Technol. A, 23, 475 (2005).
  9. R. Jagannathan, M. Krishnan, IBM J. Res. Dev., 37, 117 (1993).
  10. Y.Y. ShachamDiamand, Electrochem. Solid State Lett., 3, 279 (2000).
  11. A. Hung, K.-M. Chen, J. Electrochem. Soc.,136, 72 (1989).
  12. M. Cherkaoui, A. Srhiri, E. Chassaing, Plat. Surf. Finish., 79, 68 (1992).
  13. R. Guo, S. Jiang, C. Yuen, M. Ng, J.; Lan, Y. Yeung and S.Lin, Fiber. Polym., 752,14(2013)
  14. L.D. Burke, G.M. Bruton, J.A. Collins, Electrochim. Acta, 44, 1467 (1998).
  15. F. Inoue, H. Philipsen and A. Radisic, J. Electrochem. Soc., D437, 159(2012). (16) L. Yu, L. Guo and R. Preisser, J. Electrochem. Soc., D3004,160(2013).
  16. X. Gan, Y. Wu, L. Liu, W. Hu, J. Appl. Electrochem.,37,899 (2007).
  17. X. Gan, Y. Wu, L. Liu, B. Shen, W. Hu, J. Alloy Comp.,455, 308 (2008).
  18. X. Gan, Y. Wu, L. Liu, B. Shen, W. Hu, Surf. Coat. Technol. 201, 7018 (2007).
  19. W.H. Lin, H.F. Chang, Surf. Coat. Technol.,107, 48 (1998).
  20. T. Anik, A. EL Haloui, M. Ebn Touhami, R. Touir, H. Larhzil, M. Sfaira, M. Mcharfi, Surf. Coat. Technol. 245, 22 (2014).
  21. M.W.Wang, T.Y. Liu, D.C. Pang, J.C.Hung and C.C.Tseng, Surf. Coat. Tech.,340, 259 (2014).
  22. T. Anik, A. E. Haloui, M. E. Touhami, R. Touir, H. Larhzil, M. Sfaira and M. Mcharfi, Surf. Coat. Tech.,22, 245 (2014).
  23. X. Gan, Y. Wu, L. Liu, W. Hu, J. Appl. Electrochem.,37,899 (2007).
  24. X. Gan, Y. Wu, L. Liu, B. Shen, W. Hu, J. Alloy Comp.,455, 308 (2008).
  25. W.H. Lin, H.F. Chang, Surf. Coat. Technol.,107, 48 (1998).