Journals / Textile and Apparel / 2026 / Volume: 26 Issue: 3

LOW VELOCITY IMPACT RESPONSE OF BIODEGRADABLE PLA COMPOSITES REINFORCED BY RECLAIMED COTTON PREFORMS

GERİ KAZANILMIŞ PAMUK PREFORMLAR İLE TAKVİYELENDİRİLMİŞ BİYOBOZUNABİLEN PLA KOMPOZİTLERİN DÜŞÜK İVMELİ DARBE TEPKİLERİ

Pages
—
Publication Date
2016-07-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also the results of the low velocity impact tests showed that variation in yarn twist and loop length has an influence on  cotton/PLA composite characteristics.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Along with the environmental awareness, biodegradable composites, produced from biodegradable polymers and fibres, have  gained more attention.
📊
Key Findings & Data:Polylactic acid (PLA) offers a possible alternative to the traditional non-biodegradable polymers since their  recycling is difficult or not economical.
💡
Conclusion & Impact:Also the results of the low velocity impact tests showed that variation in yarn twist and loop length has an influence on  cotton/PLA composite characteristics.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cotton fibers · reclaimed cotton · PLA resin

Abstract

Along with the environmental awareness, biodegradable composites, produced from biodegradable polymers and fibres, have  gained more attention. Polylactic acid (PLA) offers a possible alternative to the traditional non-biodegradable polymers since their  recycling is difficult or not economical. As being a natural fibre, cotton is very attractive in reinforcement of green composites. In this  study biodegradable composites were obtained from PLA and knitted preforms manufactured from raw cotton and reclaimed cotton, by  using compression molding method. Impact properties of composites comprised of different preform structures were tested. The  promising impact property of reclaimed cotton/PLA composite shows the potential of reclaimed fibres in the usage of biodegradable  composites. Also the results of the low velocity impact tests showed that variation in yarn twist and loop length has an influence on  cotton/PLA composite characteristics.

Özet

Çevresel farkındalık ile birlikte, biyobozunabilir polimerler ve liflerden üretilen biyobozunabilir kompozitler daha fazla dikkat  çekmiştir. Polilaktik asit (PLA), geri dönüşümleri zor veya ekonomik olmadığından dolayı biyolojik olarak bozunamayan geleneksel  polimerlere bir alternatif sunmaktadır. Doğal bir lif olarak, pamuk, yeşil kompozitlerin takviyesi için oldukça çekicidir. Bu çalışmada,  PLA ile ham pamuk iplik ve geri kazanılmış pamuk iplikten üretilen örme preformlardan, basınçlı kalıplama metodu ilei biyobozunabilir  kompozitler elde edilmiştir. Farklı preform yapılarından oluşan kompozitlerin darbe özellikleri test edilmiştir. PLA/geri kazanılmış  pamuk kompozitin gelecek vaadeden darbe özelliği, geri kazanılmış liflerin biyobozunabilir kompozitlerde kullanım potansiyelini  göstermektedir. Ayrıca düşük hızlı darbe deneyinin sonuçları iplik mukavemeti ve ilmek boyutundaki değişimlerin PLA/pamuk  kompozitin özelliklerinde etkili olduğunu göstermiştir.

🔖

Cite This Article

Pamuk, G., Kemiklioğlu, U., Sayman, O., Özdemir, O. (2016). LOW VELOCITY IMPACT RESPONSE OF BIODEGRADABLE PLA COMPOSITES REINFORCED BY RECLAIMED COTTON PREFORMS. Textile and Apparel, Volume: 26 Issue: 3. https://ajindex.com/articles/1640323

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Bax B. and Mussig J., 2008, “Impact and Tensile Properties of PLA/Cordenka and PLA/Flax Composites”, Composites Science and Technology, Vol: 68,
  2. pp: 1601–1607.