Journals / Textile and Apparel / 2026 / Volume: 36 Issue: 2

Design and Development of Nonwoven Filters and Back Pressure Analysis Using Computational Fluid Dynamics

Prabu K(Indian Institute of Handloom Technology)0000-0001-8469-7965
Sivakumar S(Kumaraguru College of Technology)0000-0002-9503-5067
Srinivasan J(Kumaraguru College of Technology)0000-0002-2448-2716
Chidambaram Prakash(Indian Institute of Handloom Technology)0000-0003-2472-6765
Pages
—
Publication Date
2026-07-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These designs revealed that they were within limit and can be utilised for filtration, where the back pressure limitations can be up to 50 kPa for up to 5kW engines.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study dealt with Computational Fluid Dynamics carried out for two newly developed wall-flow filters as parallel and star structures inside a Catalytic Converter present in the exhaust manifold.
📊
Key Findings & Data:The total volume of filters along with the Diesel Oxidation Catalyst (DOC) covered a volume of 1100cc inside the Catalytic Converter in the exhaust system.
💡
Conclusion & Impact:These designs revealed that they were within limit and can be utilised for filtration, where the back pressure limitations can be up to 50 kPa for up to 5kW engines.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Cross-Section · Flattening Percentage · Height

Abstract

This study dealt with Computational Fluid Dynamics carried out for two newly developed wall-flow filters as parallel and star structures inside a Catalytic Converter present in the exhaust manifold. Further, they studied along with optimised nonwoven filter media inserted inside them to analyse the back pressure formed during exhaust filtration process. The total volume of filters along with the Diesel Oxidation Catalyst (DOC) covered a volume of 1100cc inside the Catalytic Converter in the exhaust system. However, as per existing studies, to maintain the ratio between the filter including DOC to the Catalytic Converter (CC) as 1:3, the model of Catalytic Converter developed with a volume of 3316.6cc in such a way that it has three times the volume and to ensure the free flow of exhaust gas through the system. The whole exhaust system examined with an exhaust air velocity of 26.2 m/s with 70% porosity and 80% porosity and found that the back pressure measurement attained were 27.83 kPa and 26.73 kPa, respectively. These designs revealed that they were within limit and can be utilised for filtration, where the back pressure limitations can be up to 50 kPa for up to 5kW engines.

🔖

Cite This Article

K, P., S, S., J, S., Prakash, C. (2026). Design and Development of Nonwoven Filters and Back Pressure Analysis Using Computational Fluid Dynamics. Textile and Apparel, Volume: 36 Issue: 2. https://doi.org/10.32710/tekstilvekonfeksiyon.1510928

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Gopal, R., Kaur, S., Ma, Z., Chan, C., Ramakrishna, S., Matsuura, T. 2006. Electrospun nanofibrous filtration membrane. Journal of Membrane Science, 281(1-2), 581-586.
  2. Stanfel, C. 2009. Fuel filtration: Protecting the diesel engine. Filtration & Separation, 46(3), 22-25.
  3. Keir, G., Jegatheesan, V. 2014. A review of computational fluid dynamics applications in pressure-driven membrane filtration. Reviews in Environmental Science and Bio/Technology, 13, 183-201.
  4. Cheer, A., Cheung, S., Hung, T. C., Piedrahita, R. H., Sanderson, S. L. 2012. Computational fluid dynamics of fish gill rakers during crossflow filtration. Bulletin of Mathematical Biology, 74, 981-1000.
  5. Hassan, M. A., Anantharamaiah, N., Khan, S. A., Pourdeyhimi, B. 2016. Computational fluid dynamics simulations and experiments of meltblown fibrous media: new die designs to enhance fiber attenuation and filtration quality. Industrial & Engineering Chemistry Research, 55(7), 2049-2058.
  6. Gao, Y., Haavisto, S., Tang, C. Y., Salmela, J., Li, W. 2013. Characterization of fluid dynamics in spacer-filled channels for membrane filtration using Doppler optical coherence tomography. Journal of Membrane Science, 448, 198-208.
  7. Date, A.W. 2005. Introduction of Computational Fluid Dynamics. St. Petersburg: FAU Erlangen-Nunberg, pp. 35-40.
  8. Serrano, J. R., Arnau, F. J., Piqueras, P., García-Afonso, Ó. 2013. Packed bed of spherical particles approach for pressure drop prediction in wall-flow DPFs (diesel particulate filters) under soot loading conditions. Energy, 58, 644-654.
  9. Ström, H., Andersson, B. 2009. Simulations of trapping of diesel and gasoline particulate matter in flow-through devices. Topics in catalysis, 52, 2047-2051.
  10. Tandon, P., Heibel, A., Whitmore, J., Kekre, N., Chithapragada, K. 2010. Measurement and prediction of filtration efficiency evolution of soot loaded diesel particulate filters. Chemical Engineering Science, 65(16), 4751-4760.
  11. Muthaiah, P.S., Sendilvelan, S 2010. CFD Analysis of catalytic converter to reduce particulate matter and achieve limited back pressure in diesel engine. Global Journals of Research in Engineering, 10(5): 2-8.
  12. Torregrosa, A. J., Serrano, J. R., Arnau, F. J., & Piqueras, P. 2011. A fluid dynamic model for unsteady compressible flow in wall-flow diesel particulate filters. Energy, 36(1), 671-684.
  13. Yang, S., Deng, C., Gao, Y., He, Y. 2016. Diesel particulate filter design simulation: A review. Advances in Mechanical Engineering, 8(3),
  14. Benaqqa, C., Gomina M., Beurotte, A., Boussuge, M., Delattre, B., Pajot, K., Pawlak, E., Rodrigues, F.2014. Morphology, physical, thermal and mechanical properties of the constitutive materials of diesel particulate filters, Applied Thermal Engineering, 62 (2014), 599-606.
  15. Koji Tsuneyoshi, Seiji Hayama Ph.D, TYK Corporation, A new SiC-based DPF for the Automotive Industry, 2008 DEER Conference Dearborn, Michigan August 6, 2008.
  16. Zhang, Z., Dong, R., Tan, D., Duan, L., Jiang, F., Yao, X.,. & Zhao, Z. 2023. Effect of structural parameters on diesel particulate filter trapping performance of heavy-duty diesel engines based on grey correlation analysis. Energy, 271, 127025.
  17. Prabu, K., Srinivasan, J., & Prakash, C. 2019. Ceramic and Glass Fibre Reinforced Flexible Composites for Particulate Filter Walls–A Novel Approach. Fibres & Textiles in Eastern Europe, (3 (135), 91-97.
  18. Prabu, K., Srinivasan, J., & Prakash, C. 2022. Development of ceramic and glass fiber needle-punched nonwoven fabrics part I: an optimization. Journal of Testing and Evaluation, 50(1), 284-299.
  19. Feng, R., Hu, X., Li, G., Sun, Z., & Deng, B. 2022. A comparative investigation between particle oxidation catalyst (POC) and diesel particulate filter (DPF) coupling aftertreatment system on emission reduction of a non-road diesel engine. Ecotoxicology and Environmental Safety, 238, 113576.
  20. Mortensen, P. M., Grunwaldt, J. D., Jensen, P. A., Knudsen, K. G., Jensen, A. D. 2011. A review of catalytic upgrading of bio-oil to engine fuels. Applied Catalysis A: General, 407(1-2), 1-19.
  21. Li, H., Wang, S., Chen, X., Xie, L., Shao, B., & Ma, Y. 2023. CFD-DEM simulation of aggregation and growth behaviors of fluid-flow-driven migrating particle in porous media. Geoenergy Science and Engineering, 231, 212343.
  22. Anderson, J.D. 1992. Governing Equations of Fluid Dynamics. In: Wendt, J.F. (eds) Computational Fluid Dynamics. Springer, Berlin, Heidelberg.
  23. Benaqqa, C., Gomina M., Beurotte, A., Boussuge, M., Delattre, B., Pajot, K., Pawlak, E., Rodrigues, F.2014. Morphology, physical, thermal and mechanical properties of the constitutive materials of diesel particulate filters, Applied Thermal Engineering, 62 (2014), 599-606.
  24. Zhang, Z., Dong, R., Tan, D., Duan, L., Jiang, F., Yao, X.,. & Zhao, Z. 2023. Effect of structural parameters on diesel particulate filter trapping performance of heavy-duty diesel engines based on grey correlation analysis. Energy, 271, 127025.