SavedAdd your journal

Journals / Cukurova University Journal of Natural and Applied Sciences / 2026 / Volume: 5 Issue: 1

Investigation of Heat Transfer and Flow Characteristics of Nanofluids In Battery Thermal Management Systems.

Özgür Çirçirci(İSKENDERUN TEKNİK ÜNİVERSİTESİ, HAVACILIK VE UZAY BİLİMLERİ FAKÜLTESİ)0009-0008-6729-9293
Metin Uzun(İskenderun teknik üniversitesi havacılık ve Uzay bilimleri fakütesl)0000-0002-0744-3491
Pages
—
Publication Date
2026-06-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that, in general, as the refrigerant velocity increases, the battery temperatures decrease and the temperature distribution becomes more homogeneous.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to investigate the thermal behaviour of lithium-ion battery packs with a liquid cooling system using numerical methods.
📊
Key Findings & Data:Water and a water-propylene glycol mixture are used as coolants, and system performance is evaluated at three different inlet velocities.
💡
Conclusion & Impact:The results show that, in general, as the refrigerant velocity increases, the battery temperatures decrease and the temperature distribution becomes more homogeneous.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Lithium-ion batteries · Liquid cooling · Thermal management

Abstract

The aim of this study is to investigate the thermal behaviour of lithium-ion battery packs with a liquid cooling system using numerical methods. The numerical analyses cover various battery configurations, coolant velocities, and fluid types. Water and a water-propylene glycol mixture are used as coolants, and system performance is evaluated at three different inlet velocities. The main criteria used to evaluate thermal performance are maximum battery temperature and inter-cell temperature difference. The results show that, in general, as the refrigerant velocity increases, the battery temperatures decrease and the temperature distribution becomes more homogeneous. However, it was found that, at high flow rates, the temperature drop is limited and thermal gains gradually decrease. In some cases, water was found to provide lower maximum temperatures, whereas the water-propylene glycol mixture provided a more balanced temperature distribution under certain operating conditions. Additionally, it was found that as the number of cells connected in series increases, the temperature differences along the flow direction become more pronounced. In addition, the preliminary evaluation of a nanoparticle-doped coolant for a selected battery configuration was investigated. It was found that the addition of Al₂O₃ nanoparticles had a limited effect on thermal performance; therefore, the nanoparticle-doped fluid was not applied to all configurations. Overall, the study revealed that coolant type, flow rate and battery configuration should be evaluated together to ensure effective battery thermal management.

🔖

Cite This Article

Çirçirci, Ö., Uzun, M. (2026). Investigation of Heat Transfer and Flow Characteristics of Nanofluids In Battery Thermal Management Systems.. Cukurova University Journal of Natural and Applied Sciences, Volume: 5 Issue: 1. https://doi.org/10.70395/cunas.1877764

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (44)

  1. Pesaran, A. (2005). Battery thermal management in EVs and HEVs: Issues and solutions. Journal of Power Sources; 144: 1–9.
  2. Paul, D., Nandi, A., Bhattacharyya, S., Das, S., Biswas, N. (2025). A comprehensive review on lithium-ion battery thermal man-agement (BTM) using phase change materials: advances, challenges, and future perspectives. Journal of Thermal Analysis and Calorimetry; 150(12): 9669-9722.
  3. Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., He, X. (2018). Thermal runaway mechanism of lithium-ion battery for electric vehicles: A review. Energy Storage Materials; 10: 246–267.
  4. Zhao, Y., Li, Q., Zou, B., Zhang, T., Jin, L., Qiao, G., Ding, Y. (2020). Performance of a liquid cooling‐based battery thermal management system with a composite phase change material. International Journal of Energy Research; 44(6): 4727-4742.
  5. Wang, Q., Jiang, B., Li, B., Yan, Y. (2016). A critical review of thermal management models and solutions of lithium-ion batter-ies. Renewable and Sustainable Energy Reviews; 64: 106–128.
  6. Park, H. (2013). A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles. Journal of Power Sources; 239: 30–36.
  7. Al-Zareer, M., Iincer, I., Rosen, M. (2018). A review of novel thermal management systems for batteries. International Journal of Energy Research; 42: 3182–3205.
  8. Wang, Q., Ping, S., Xhao, X., Chu, G., Sun, J., Chen, C. (2012). Thermal runaway caused fire and explosion of lithium ion battery. Journal of Power Sources; 208: 210–224.
  9. Rao, Y., Wang, S. (2011). A review of power battery thermal energy management. Renewable and Sustainable Energy Reviews; 15: 4554–4571.
  10. Tan, X., Lyu, P., Fan, Y., Rao, J., Ouyang, K. (2021). Numerical investigation of the direct liquid cooling of a fast-charging lithi-um-ion battery pack in hydrofluoroether. Applied Thermal Engineering; 196: 117279.
  11. Bhagat, A. K., Muthusamy, E., Goyal, R. K. (2025). Solar Photovoltaic Systems Enhanced by Composite Phase Change Materi-als and Thermoelectric Generators: A Critical Review. Applied Solar Energy; 61(6): 655-679.
  12. Qian, Z., Li, Y., Rao, Z. (2016). Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling. Energy Conversion and Management; 126: 622-631.
  13. Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., Al-Hallaj, S. (2005). Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation. Journal of Power Sources; 142(1-2): 345-353.
  14. Liu, Y., Li, J., Chen, C. (2019). Effect of coolant properties on battery thermal management. Applied Thermal Engineering; 155: 331–340.
  15. Gonzalez-Agirre, E., Behi, H., Gastelurrutia, J., del Portillo-Valdés, L., Kalogiannis, T., Berecibar, M. (2023). Implementation of battery thermal management system for high-performance electromobility application: A hybrid cold plate and phase change ma-terial approach. IEEE Transactions on Vehicular Technology; 74(2): 2587-2598.
  16. Sheng, L., Su, L., Zhang, H., Li, K., Fang, Y., Ye, W., Fang, Y. (2019). Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger. International Journal of Heat and Mass Trans-fer; 141: 658-668.
  17. Jiaqiang, E., Han, D., Qiu, A., Zhu, H., Deng, Y., Chen, J., Peng, Q. (2018). Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system. Applied Thermal Engineering; 132: 508-520.
  18. Sabbah, M., Kizilel, R., Selman, J., Al-Hallaj, S. (2008). Active (air-cooled) vs. passive (PCM-based) thermal management of high power lithium-ion packs. Journal of Power Sources; 182: 630–638.
  19. Chen, K., Wang, S., Song, M., Chen, L. (2017). Configuration optimization of battery pack in parallel air-cooled battery thermal management system using an optimization strategy. Applied Thermal Engineering; 123: 177-186.
  20. Chen, Y., Evans, J. (2008). Thermal analysis of lithium-ion batteries. Journal of Power Sources; 183: 401–408.
  21. Jaguemont, J., Boulon, L., Dubé, Y. (2016). A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures. Applied Energy; 164: 99-114.
  22. Sheng, L., Zhang, H., Su, L., Zhang, Z., Zhang, H., Li, K., Ye, W. (2021). Effect analysis on thermal profile management of a cylindrical lithium-ion battery utilizing a cellular liquid cooling jacket. Energy; 220: 119725.
  23. Wang, Y., Zhang, G., Yang, X. (2019). Optimization of liquid cooling technology for cylindrical power battery module. Applied Thermal Engineering; 162: 114200.
  24. Forgez, C., Vinh Do, D., Friedrich, G., Morcrette, M., Delacourt, C. (2010). Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery. Journal of Power Sources; 195: 2961–2968.
  25. Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., Fowler, M. (2017). Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery. Applied Thermal Engineering; 122: 80-90.
  26. Zhang, J., Lee, J. (2011). A review on prognostics and health monitoring of Li-ion battery. Journal of Power Sources; 196: 6007–6014.
  27. Rao, Z., Wang, S., Zhang, G. (2011). Simulation and experiment of thermal energy management with phase change material for ageing LiFePO4 power battery. Energy Conversion and Management; 52(12): 3408-3414.
  28. Fleckenstein, S., Bohlen, O., Roscher, M. A., Bäker, B. (2011). Current density and state of charge inhomogeneities in lithium-ion battery cells. Journal of Power Sources; 196: 4769–4778.
  29. Waldmann, T., Kasper, M., Wohlfahrt-Mehrens, M. (2018). Optimization of battery thermal management. Journal of Power Sources; 384: 107–124.
  30. Kang, D., Lee, P. Y., Yoo, K., Kim, J. (2020). Internal thermal network model-based inner temperature distribution of high-power lithium-ion battery packs with different shapes for thermal management. Journal of Energy Storage; 27: 101017.
  31. Ling, Z., Chen, J. (2014). Review on thermal management of lithium-ion battery packs. Renewable and Sustainable Energy Reviews; 31: 427–438.
  32. Mills, A., Farid, M., Selman, J. R., Al-Hallaj, S. (2006). Thermal conductivity enhancement of phase change materials using a graphite matrix. Applied Thermal Engineering; 26(14-15): 1652-1661.
  33. Deng, T., Zhang, G., Ran, Y. (2018). Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate. International Journal of Heat and Mass Transfer; 125: 143-152.
  34. Huo, Y., Rao, Z., Liu, X., Zhao, J. (2015). Investigation of power battery thermal management by using mini-channel cold plate. Energy Conversion and Management; 89: 387-395.
  35. Sheng, L., Su, L., Zhang, H., Li, K., Fang, Y., Ye, W., Fang, Y. (2019). Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger. International Journal of Heat and Mass Transfer; 141: 658-668.
  36. Behi, H., Karimi, D., Behi, M., Jaguemont, J., Ghanbarpour, M., Behnia, M., Van Mierlo, J. (2020). Thermal management analysis using heat pipe in the high current discharging of lithium-ion battery in electric vehicles. Journal of Energy Storage; 32: 101893.
  37. Jiao, S. Q., Jiao, H. D., Song, W. L., Wang, M. Y., Tu, J. G. (2020). A review on liquid metals as cathodes for molten salt/oxide electrolysis. International Journal of Minerals, Metallurgy and Materials; 27(12): 1588-1598.
  38. Liu, H., Chika, E., Zhao, J. (2018). Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery. Applied Thermal Engineering; 142: 511-523.
  39. Kim, J., Oh, J., Lee, H. (2019). Review on battery thermal management system for electric vehicles. Applied Thermal Engineer-ing; 149: 192-212.
  40. Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A., Salameh, T., Abdelkareem, M. A. (2022). Battery thermal management systems: Recent progress and challenges. International Journal of Thermofluids; 15: 100171.
  41. Aydın, S., Uzun, M. (2024). The effectiveness of advanced cooling solutions in managing the thermal performance of lithium-ion batteries: A numerical study. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi; 16(2): 397–410.
  42. Uzun, M. (2025). Thermal and electrical analysis of 26650 Li-ion batteries in series connection using the NTGK model and virtual simulations. European Mechanical Science; 9(1): 46–58.
  43. Keyinci, S., Ilinčić, P., Tosun, E., Uzun, M., Yakaryilmaz, A. C., Ozcanli, M. (2025). Design and performance analysis of a curved channel liquid cooling system for battery thermal management. Thermal Science and Engineering Progress; 103690.
  44. Qian, Z., Y. Li, Rao, Z. (2016). Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling. Energy Conversion and Management; 126: 622–631.