Journals / Akdeniz Üniversitesi Ziraat Fakültesi Dergisi / 2006 / Cilt: 19 - Sayı: 1

The effect of manufacturing variation coefficient on irrigation uniformity of in-line and on-line drippers

Boruya içten geçik (in-line) ve dıştan geçik (on-line) damlatıcılarda yapım farklılığı katsayısının sulama yeknesaklığına etkisi

Pages
1–8
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For on-line emitters the average manufacturing variation coefficient (Cv) was 8.47 %, the average emission uniformity coefficient (EU) was 89.73%, the average Christiansen uniformity coefficient (Cu) was 93.24 % and the average statistical uniformity coefficient (Us) was 91.54%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this research, the effectiveness of manufacturing variation at different kind and characteristics of in-line and on-line drippers, produced by some European countries, Israel and Turkey, on irrigation uniforrriity was comparatively evaluated.
📊
Key Findings & Data:According to this study; for in-line emitters the average manufacturing variation coefficient (Cv) was 2.89 %, the average emission uniformity coefficient (EU) was 96.43%, the average Christiansen uniformity coefficient (Cu) was 97.55 %, and the average statistical uniformity coefficient (Us) was 96.97%.
💡
Conclusion & Impact:For on-line emitters the average manufacturing variation coefficient (Cv) was 8.47 %, the average emission uniformity coefficient (EU) was 89.73%, the average Christiansen uniformity coefficient (Cu) was 93.24 % and the average statistical uniformity coefficient (Us) was 91.54%.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:sulama donanımı · boru · performans

Abstract

In this research, the effectiveness of manufacturing variation at different kind and characteristics of in-line and on-line drippers, produced by some European countries, Israel and Turkey, on irrigation uniforrriity was comparatively evaluated. According to this study; for in-line emitters the average manufacturing variation coefficient (Cv) was 2.89 %, the average emission uniformity coefficient (EU) was 96.43%, the average Christiansen uniformity coefficient (Cu) was 97.55 %, and the average statistical uniformity coefficient (Us) was 96.97%. For on-line emitters the average manufacturing variation coefficient (Cv) was 8.47 %, the average emission uniformity coefficient (EU) was 89.73%, the average Christiansen uniformity coefficient (Cu) was 93.24 % and the average statistical uniformity coefficient (Us) was 91.54%.

Özet

Bu araştırmada, bazı Avrupa Ülkeleri, İsrail ve Türkiye'de üretimi yapılan farklı tip ve özellikteki boruya içten gecik (in-line) ve dıştan gecik (on-line) damlatıcıların yapım faklılıklarının sulama yeknesaklığına olan etkileri karşılaştırmalı olarak değerlendirilmiştir. Araştırma sonucunda; içten gecik damlatıcıların ortalama yapım farklılığı katsayısı (Cv) %2.89, damlama türdeşliği (EU) %96.43, Christiansen yeknesaklık katsayısı (Cu) %97.55 ye istatistiksel yeknesaklık katsayısı (Us) ise %96.97; dıştan gecik damlatıcılara ilişkin ortalama yapım farklılığı katsayısı (Cv) %8.47, damlama türdeşliği (EU) %89.73, Christiansen yeknesaklık katsayısı (Cu) %93.24 ve istatistiksel yeknesaklık katsayısı (Us) ise %91.54 olarak bulunmuştur.

🔖

Cite This Article

ÇAMOĞLU, G., YAVUZ, M. Y. (2006). The effect of manufacturing variation coefficient on irrigation uniformity of in-line and on-line drippers. Akdeniz Üniversitesi Ziraat Fakültesi Dergisi, Cilt: 19 - Sayı: 1, 1–8. https://ajindex.com/articles/159788

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. ASAE, 1994. Design and Installation of Microirrigation Systems. ASAE EP405.1 Dec.93, p.724-727. ASAE, 2002. Design and Installation of Microirrigation Systems. ASAE EP405.1 Dec.01, p.903-907.
  2. Bozkurt, S., 1996. İçten Gecik (In-Line) Damlatıcılarda Yapım Farklılıklarının Eş Su Dağılımına Etkileri. Ç.Ü. Fen Bil. Ens. Tarımsal Yapılar ve Sulama Anabilim Dalı, Yüksek Lisans Tezi, s.20, Adana. Bralts, V. F. and Kesner, C. D., 1983. Drip Irrigation Field Uniformity Estimation. Transactions of the ASAE 26(5), p.1369-1374.
  3. Bralts, V. F., 1986. Operational Principles-Field Performance and Evaluation In: Trickle Irrigation for Crop Production (ed. F. S. Nakayama, D. A. Bucks), Elsevier Science Publisher, B. V. The Netherlands, p.216-223.
  4. Bralts, V., Edwards, D. M. and Wu, I. P., 1987. Drip Irrigation Design and Evaluation Based on the Statistical Uniformity Concept. Advaces in Irrigation, Vol. 4, p.72. Chiristiansen, J. E., 1942. Hydraulic of Springling Systems for Irrigation. Trans. ASCE 107, p.221-239.
  5. Howell, T. A., Bucks, D. A., Goldhamer, D. A. and Lima, J. M., 1986. Management Principles-Irrigation Scheduling In: Trickle Irrigation for Crop Production (ed. F. S. Nakayama, D. A. Bucks), Elsevier Science Publisher,
  6. B. V. The Netherlands. Kapdaşlı, S., Mutlu, T. ve Fer, İ., 1997. Marmara Plastik Damla Sulaması Boruları Hidrolik Deneyleri. İ.T.Ü. İnşaat Fak. Yayınları, Cilt 1, İstanbul.
  7. Keller, J. and Karmeli, D., 1975. Trickle Irrigation Design. Rain Bird Sprinkler Manufacturing Corporation Glendora, California, U.S.A., p. 1-5, 17-18,46-49.
  8. Kırnak, H., Doğan, E., Demir, S. ve Yalçın, S., 2004. Determination of Hyraulic Performance of Trickle Irrigation Emitters used in Irrigation Systems in the Harran Plain. Tr. J. of Agriculture and Forestry, 28 (2004), 223-230.
  9. Korukçu, A., 1980. Damla Sulamasında Yan Boru Uzunlarının Saptanması Üzerinde Bir Araştırma. Ankara Ün. Zir. Fak. Yayınları 742, s.75, Ankara.
  10. Özekici, B. and Sneed, R. E., 1995. Manufacturing Variation for Various Trickle Irrigation On-Line Emitters. Applied Engineering in Agriculture 11(2), p.235-240.
  11. Özekici, B. ve Bozkurt, S., 1996. Boru İçi (In-Line) Damlatıcıların Hidrolik Performanslarının Belirlenmesi.Tr. J. of Agriculture and Forestry 23 (1999) Ek Sayı 1, s. 19-24,
  12. Tübitak. Püskülcü, H. ve İkiz, F., 1986. İstatistiğe Giriş. Ege Ün. Mühendislik Fak. Ders Kitapları Yayın No: 1, s.234, İzmir.
  13. Yılmaz, E., 1988. Damla Sulama Sistemlerinde Kullanılan yerli ve Yabancı Kökenli Damlatıcıların Özellikleri