SavedAdd your journal

Journals / Turkish Journal of Agricultural Engineering Research / 2024 / Volume: 5 Issue: 2

Effects of Using Seed Tube on Seed Distribution Uniformity in Single Seed Planters

Mehdi Güven0009-0003-8203-6284
Nisanur Yakut0009-0006-5999-2034
Emrah Kuş(Igdir University, Faculty of Agriculture, Department of Biosystem Engineering)0000-0001-6880-5591
Pages
—
Publication Date
2024-12-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

While it was expected that the use of seed tubes in single-seed planters would have a positive effect on the uniformity of seed distribution intra-rows and inter-rows, it was found that on the contrary, the uniformity of seed distribution deteriorated and there was a high degree of variation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In single-seed sowing of small seeds, in addition to seed size and shape, critical problems can be experienced due to the electrostatic force that occurs during seeds adhering to the plate holes.
📊
Key Findings & Data:For this purpose, the study, designed with two different seed drop heights (115 mm and 200 mm) and without and with seed tube, was carried out at three different forward speeds (0.5 m s-1, 1.0 m s-1, and 1.5 m s-1).
💡
Conclusion & Impact:While it was expected that the use of seed tubes in single-seed planters would have a positive effect on the uniformity of seed distribution intra-rows and inter-rows, it was found that on the contrary, the uniformity of seed distribution deteriorated and there was a high degree of variation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Small seeds · Seed dropping method · Seed drop height

Abstract

In single-seed sowing of small seeds, in addition to seed size and shape, critical problems can be experienced due to the electrostatic force that occurs during seeds adhering to the plate holes. To find a solution to these problems, the effect of using seed tubes in single-seed planters was the subject of the study. For this purpose, the study, designed with two different seed drop heights (115 mm and 200 mm) and without and with seed tube, was carried out at three different forward speeds (0.5 m s-1, 1.0 m s-1, and 1.5 m s-1). According to the analysis results applied to the data, it was determined that the seed distribution uniformity was negatively affected by the increase in seed drop height and progress speed, and the planting quality deteriorated. While it was expected that the use of seed tubes in single-seed planters would have a positive effect on the uniformity of seed distribution intra-rows and inter-rows, it was found that on the contrary, the uniformity of seed distribution deteriorated and there was a high degree of variation. The best values for seed distribution uniformity were obtained with a forward speed of 0.5 m s-1, a seed drop height of 115 mm, and no seed tube.

🔖

Cite This Article

Güven, M., Yakut, N., Kuş, E. (2024). Effects of Using Seed Tube on Seed Distribution Uniformity in Single Seed Planters. Turkish Journal of Agricultural Engineering Research, Volume: 5 Issue: 2. https://doi.org/10.46592/turkager.1570191

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Afzal I, Javed T, Amirkhani M and Taylor AG (2020). Modern seed technology: seed coating delivery systems for enhancing seed and crop performance. Agriculture, 10(11): 526. https://doi.org/10.3390/agriculture10110526
  2. ASAE Standard (2005). American Society of Agricultural Engineers (ASAE). Cubes, Pellets, and Crumbles-Definitions and Methods for Determining Density, Durability, and Moisture Content, ASAE S269.4 DEC01. St. Joseph Mich. USA.
  3. Barut Z (2008). Seed coating and tillage effects on sesame stand establishment and planter performance for single seed sowing. Applied Engineering in Agriculture, 24(5), 565-571. https://doi.org/10.13031/2013.25268
  4. Deividson LO and Rosane F (2014). Usage of the DFRobot RB-DFR-49 Infrared sensor to detect maize seed passage on a conveyor belt. Computers and Electronics in Agriculture, 102: 106-111. https://doi.org/10.1016/j.compag.2014.01.012
  5. Dongyan H, Honglei J, Yue Q, Longtu Z and Honggang L (2013). Seeding monitor system for planter based on polyvinylidence fluroride piezoelectric film. Transactions of the Chinese Society of Agricultural Engineering, 23: 15-22.
  6. Günal ME and Kuş E (2021). Evaluation of parameters effective to performance of vacuum planter in single-seed sowing of the chickpea. Fresenius Environmental Bulletin, 11: 12140-12145.
  7. Hacıyusufoğlu AF, Akbaş T and Şimşek E (2015). Implement of the method of seed coating with pellet on some small-diameter seeds. Journal of Agricultural Machinery Science, 11(3): 257-263. (In Turkish).
  8. Haotun L, Jieyu R, Xin L, Shixiong L, Gang W and Yongjun Z (2018) Review of the monitoring systems of the machine for precision sowing and fertilization of wheat. In Proceedings of the ASABE 2018 Annual International Meeting, Austin, TX, USA, 29 July-1 August 2018; p. 1800736.
  9. Jakub L, Václav K, Václav P and František K (2017). Capacitive throughput sensor for plant materials-effects of frequency and moisture content. Computers and Electronics in Agriculture, 133: 22-29. https://doi.org/10.1016/j.compag.2016.12.014
  10. Kachman SD and Smith JA (1995). Alternative measures of accuracy in plant spacing for planters using single seed metering. Transactions of the ASAE, 38(2): 379-387. https://doi.org/10.13031/2013.27843
  11. Karayel D, Wiesehoff M, Özmerzi A and Müller J (2006). Laboratory measurement of seed drill seed spacing and velocity of fall of seeds using high-speed camera system. Computers and Electronics in Agriculture, 50: 89-96. https://doi.org/10.1016/j.compag.2005.05.005
  12. Kuş E (2014). Determination of effects of drop height of seed and ground speed on sowing qualification for conventional and reduced tillage conditions in precision vacuum seeders. PhD Thesis, Ataturk University (Unpublished), Turkey.
  13. Kuş E (2021a). An Attempt to Evaluate the Performance Parameters of a Precision Vacuum Seeder in Different Seed Drop Height. Journal of the Institute of Science and Technology, 11(3): 1846-1853.
  14. Kuş E (2021b). Evaluation of Some Operational Parameters of a Vacuum Single-Seed Planter in Maize Sowing. Journal of Agricultural Sciences (Tarim Bilimleri Dergisi), 27(3): 327-334.
  15. Kuş E (2021c). Field-scale evaluation of parameters affecting planter vibration in single seed planting. Measurement, 184. Seed Drop Height. Journal of the Institute of Science and Technology, 11(3): 1846-1853. https://doi.org/10.21597/jist.930974
  16. Linco Precision (2024). WaveVision Sensors (Precision planting). Available online: https://www.lincoprecision.com/precision-farming/precisioplanting/wavevision-sensors/ (08/10/2024).
  17. Liming Z, Xiaochao Z and Yanwei Y (2010). Design of capacitance seed rate sensor of wheat planter. Transactions of the Chinese Society of Agricultural Engineering, 10: 99-103.
  18. Liu W, Hu J, Zhao X, Pan H, Lakhiar IA, Wang W and Zhao J (2019). Development and Experimental Analysis of a Seeding Quantity Sensor for the Precision Seeding of Small Seeds. Sensors (Basel), 19(23): 5191. https://doi.org/10.3390/s19235191
  19. Marko K, Dusan R, Dragi R, Lazar S, Nebojsa D, Vladimir C and Natasa L (2018). Corn seeding process fault cause analysis based on a theoretical and experimental approach. Computers and Electronics in Agriculture, 151: 207-218. https://doi.org/10.1016/j.measurement.2021.109959
  20. Rocha I, Ma Y, Souza-Alonso P, Vosátka M, Freitas H and Oliveira RS (2019). Seed Coating: A Tool for Delivering Beneficial Microbes to Agricultural Crops. Frontiers in Plant Science, 10: 1357. https://doi.org/10.3389/fpls.2019.01357
  21. Singh RC, Singh G and Saraswat DC (2005). Optimizing of design and operational parameters of pneumatic seed metering device for planting cottonseeds. Biosystem Engineering, 92(4): 429-438. https://doi.org/10.1016/j.biosystemseng.2005.07.002
  22. Yazgı A, Demir V and Değirmencioğlu A (2020). Comparison of Computational Fluid Dynamics Based Simulations and Visualized Seed Trajectories in Different Seed Tubes. Turkish Journal of Agriculture and Forestry, 44(6): 599-611. https://doi.org/10.3906/tar-1910-15
  23. Youchun D, Junqiang Y, Kai Z, Lili Z, Yawen Z and Qingxi L (2017). Design and experiment on seed flow sensing device for rapeseed precision metering device. Transactions of the Chinese Society of Agricultural Engineering, 9: 37-44.
  24. Youchun D, Lili Z, Junqiang Y and Kai Z (2018). Sensing device improvement and communication design on sowing monitoring system of precision planter for rapeseed. Transactions of the Chinese Society of Agricultural Engineering, 14: 19-26. Yujing S, Honglei J, Deliang R, Jingjing Y and Yang L (2013). Experimental study of capacitance sensors to test seed-flow. Applied Mechanics and Materials, 347: 167-170. https://doi.org/10.4028/www.scientific.net/AMM.347-350.167