Journals / Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2025 / Cilt: 6 Sayı: 3

Performance Assessment of Meltblown TPU Nanofiber-Based Air Filtration Membranes

Eriyikten Üfleme Yöntemiyle Üretilmiş TPU Nanolif Bazlı Hava Filtrasyon Membranlarının Performans Değerlendirmesi

Ali Toptaş(İSTANBUL TEKNİK ÜNİVERSİTESİ)0000-0002-1176-0844
Pages
721–732
Publication Date
2025-12-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These findings highlight the potential of the melt-blown process as an environmentally friendly, rapid, scalable, and solvent-free method to produce high-performance TPU based nanofibrous air filters.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Air pollution has emerged as one of the most pressing environmental challenges, primarily driven by rapid industrialization and climate-related phenomena.
📊
Key Findings & Data:The experimental design was structured using a Taguchi L9 orthogonal array, considering three processing parameters at three levels each: feeding rate (1, 5, and 10 rpm), die (nozzle) temperature (220, 240, and 260 °C), and air pressure (1, 2, and 3 bar).
💡
Conclusion & Impact:These findings highlight the potential of the melt-blown process as an environmentally friendly, rapid, scalable, and solvent-free method to produce high-performance TPU based nanofibrous air filters.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Nanolif · Hava filtresi · TPU

Abstract

Air pollution has emerged as one of the most pressing environmental challenges, primarily driven by rapid industrialization and climate-related phenomena. Within this context, nanofiber-based filter materials offering high particle capture efficiency and low pressure drop (ΔP) play a crucial role in ensuring access to clean air. In this study, nanofibrous filter surfaces based on thermoplastic polyurethane (TPU) were fabricated via the melt-blowing (MB) technique a solvent-free and high-throughput production method. The experimental design was structured using a Taguchi L9 orthogonal array, considering three processing parameters at three levels each: feeding rate (1, 5, and 10 rpm), die (nozzle) temperature (220, 240, and 260 °C), and air pressure (1, 2, and 3 bar). The morphological characteristics of the produced nanofibers were examined through scanning electron microscopy (SEM). Their AFDs, filtration efficiencies, pressure drops (ΔP), air permeabilities, and quality factors (QFs) were systematically compared. The sample produced under the optimal conditions -1 rpm feeding rate, 260 °C die temperature, and 3 bar air pressure- demonstrated the best performance, achieving a filtration efficiency of 82.12% and a ΔP of 95 Pa, with an average fiber diameter (AFD) of 423 ± 47 nm. Moreover, this optimal sample was subjected to mechanical strain levels of 5%, 10%, and 20%, and successfully preserved its functional integrity, maintaining a filtration efficiency of 71.44% even at 20% elongation. These findings highlight the potential of the melt-blown process as an environmentally friendly, rapid, scalable, and solvent-free method to produce high-performance TPU based nanofibrous air filters.

Özet

Artan sanayileşme ve iklim kaynaklı olaylar hava kirliliğini, insan sağlığını tehdit eden önemli çevresel sorunlardan biri hâline getirmiştir. Bu kapsamda, yüksek partikül tutma kapasitesine sahip, düşük basınç kaybı sunan nanolifli filtre malzemeleri, temiz hava elde etmede kritik öneme sahiptir. Bu çalışmada, melt-blowing (MB) yöntemiyle yüksek üretim hızlarında termoplastik poliüretan (TPU) bazlı nanolifli yüzeyler çözücü kullanılmadan üretilmiş ve hava filtrasyonu uygulamaları açısından performansları değerlendirilmiştir. Deneysel çalışmalar, üç farklı seviyede belirlenen besleme hızı (1, 5, 10 rpm), kalıp (nozül) sıcaklığı (220, 240, 260 °C) ve hava basıncı (1, 2, 3 bar) parametreleri doğrultusunda, Taguchi L9 ortogonal deney tasarımı ile gerçekleştirilmiştir. Üretilen nanolifli yüzeylerin morfolojik analizleri taramalı elektron mikroskobu (SEM) ile yapılmıştır. Ortalama lif çapları, filtrasyon verimlilikleri, basınç düşüşleri, hava geçirgenlikleri ve kalite faktörleri karşılaştırılmıştır. 1 rpm besleme hızı, 260 °C nozül sıcaklığı ve 3 bar hava basıncı ile üretilen numune, 423 ± 47 nm ortalama lif çapı ile %82,12 filtrasyon verimliliği ve 95 Pa basınç düşüşü sunarak en iyi performansı göstermiştir. Ayrıca bu numune, uygulanan %5, %10 ve %20 gerinim altında da filtre performansı test edilmiş; en yüksek gerinim seviyesinde dahi %71,44 oranında filtrasyon verimliliği göstererek fonksiyonel dayanıklılığını korumuştur. Elde edilen bulgular, MB yönteminin çevre dostu, hızlı, ölçeklenebilir ve çözücü içermeyen bir üretim süreci olarak TPU esaslı nanolifli hava filtreleri üretiminde önemli bir alternatif sunduğunu ortaya koymaktadır.

🔖

Cite This Article

Toptaş, A. (2025). Performance Assessment of Meltblown TPU Nanofiber-Based Air Filtration Membranes. Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 6 Sayı: 3, 721–732. https://doi.org/10.53501/rteufemud.1667529

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Alhussain, H., Ghani, S., & Eltai, N. O. (2024). Breathing Clean Air: Navigating Indoor Air Purification Techniques and Finding the Ideal Solution. International Journal of Environmental Research and Public Health, 21(8), 1107. https://doi.org/10.3390/ijerph21081107
  2. Balogh, A., Horváthová, T., Fülöp, Z., Loftsson, T., Harasztos, A. H., Marosi, G., & Nagy, Z. K. (2015). Electroblowing and electrospinning of fibrous diclofenac sodium-cyclodextrin complex-based reconstitution injection. Journal of Drug Delivery Science and Technology, 26, 28–34. https://doi.org/10.1016/j.jddst.2015.02.003
  3. Barhoum, A., Rasouli, R., Yousefzadeh, M., Rahier, H., & Bechelany, M. (2019). Nanofiber Technologies: History and Development. In A. Barhoum, M. Bechelany, & A. S. H. Makhlouf (Eds.), Handbook of Nanofibers (pp. 3–43). Springer International Publishing. https://doi.org/10.1007/978-3-319-53655-2_54
  4. Becerra Casas, D. S., Reyes Bello, C. F., Rubiano Labrador, J. S., & Fajardo Montaña, O. A. (2020). Portable and Mobile System Connected to a Web Application for the Measurement of Air Quality in the City of Bogotá Associated with Particulate Matter and Meteorological Variables. In J. C. Figueroa-García, F. S. Garay-Rairán, G. J. Hernández-Pérez, & Y. Díaz-Gutierrez (Eds.), Applied Computer Sciences in Engineering (pp. 398–408). Springer International Publishing. https://doi.org/10.1007/978-3-030-61834-6_34
  5. Calisir, M. D., Gungor, M., Toptas, A., Donmez, U., Kilic, A., & Karabuga, S. (2022). Clogging performance of micro/nanofibrous laminated composite air filter media. Journal of Industrial Textiles, 52, 15280837221113084. https://doi.org/10.1177/15280837221113084
  6. Demina, T. S., Bolbasov, E. N., Peshkova, M. A., Efremov, Y. M., Bikmulina, P. Y., Birdibekova, A. V., Popyrina, T. N., Kosheleva, N. V., Tverdokhlebov, S. I., Timashev, P. S., & Akopova, T. A. (2022). Electrospinning vs. Electro-Assisted Solution Blow Spinning for Fabrication of Fibrous Scaffolds for Tissue Engineering. Polymers, 14(23), Article 23. https://doi.org/10.3390/polym14235254
  7. Eticha, A. K., Akgul, Y., Pakolpakcil, A., Unlu, O. K., Cug, H., & Kilic, A. (2024). Fabrication of stretchable and high-filtration performance melt-blown nonwoven webs for PM0.3 aerosol filtration. Journal of Applied Polymer Science, 141(17), e55297. https://doi.org/10.1002/app.55297
  8. ETICHA, A., TOPTAŞ, A., AKGÜL, Y., & KILIÇ, A. (2023). Electrically assisted solution blow spinning of PVDF/TPU nanofibrous mats for air filtration applications. Turkish Journal of Chemistry, 47(1), 47–53. https://doi.org/10.55730/1300-0527.3515
  9. Feng, T., Sun, Y., Shi, Y., Ma, J., Feng, C., & Chen, Z. (2024). Air pollution control policies and impacts: A review. Renewable and Sustainable Energy Reviews, 191, 114071. https://doi.org/10.1016/j.rser.2023.114071
  10. Gungor, M., Toptas, A., Calisir, M. D., & Kilic, A. (2021). Aerosol filtration performance of nanofibrous mats produced via electrically assisted industrial-scale solution blowing. Polymer Engineering & Science, 61(10), 2557–2566. https://doi.org/10.1002/pen.25780
  11. Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013). Fabrication of nanofiber meltblown membranes and their filtration properties. Journal of Membrane Science, 427, 336–344. https://doi.org/10.1016/j.memsci.2012.09.050
  12. Kilic, A., Selcuk, S., Toptas, A., & Seyhan, A. (2023). Chapter 10—Nonelectro nanofiber spinning techniques. In A. Kargari, T. Matsuura, & M. M. A. Shirazi (Eds.), Electrospun and Nanofibrous Membranes (pp. 267–293). Elsevier. https://doi.org/10.1016/B978-0-12-823032-9.00001-5
  13. Lee, Y. E., & Wadsworth, L. C. (2007). Fiber and web formation of melt-blown thermoplastic polyurethane polymers. Journal of Applied Polymer Science, 105(6), 3724–3727. https://doi.org/10.1002/app.26432
  14. Lin, X., Sun, W., Lin, M., Chen, T., Duan, K., Lin, H., Zhang, C., & Qi, H. (2024). Bicomponent core/sheath melt-blown fibers for air filtration with ultra-low resistance. RSC Advances, 14(20), 14100–14113. https://doi.org/10.1039/d4ra02174f
  15. Nayak, R., Kyratzis, I. L., Truong, Y. B., Padhye, R., & Arnold, L. (2015). Structural and mechanical properties of polypropylene nanofibres fabricated by meltblowing. The Journal of The Textile Institute, 106(6), 629–640. https://doi.org/10.1080/00405000.2014.933512
  16. Oktem, H., Erzurumlu, T., & Uzman, I. (2007). Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part. Materials & Design, 28(4), 1271–1278. https://doi.org/10.1016/j.matdes.2005.12.013
  17. Papa, G., Capitani, G., Pellecchia, M., & Negri, I. (2021). Particulate Matter Contamination of Bee Pollen in an Industrial Area of the Po Valley (Italy). Applied Sciences, 11(23), Article 23. https://doi.org/10.3390/app112311390
  18. Pawar, A., Anderson, B., Pourdeyhimi, B., McNulty, A. L., Fisher, M., & Shirwaiker, R. (2024). 3D melt blowing of Elastollan thermoplastic polyurethane for tissue engineering applications: A pilot study. Manufacturing Letters, 41, 357–363. https://doi.org/10.1016/j.mfglet.2024.09.043
  19. Soltani, I., & Macosko, C. W. (2018). Influence of rheology and surface properties on morphology of nanofibers derived from islands-in-the-sea meltblown nonwovens. Polymer, 145, 21–30. https://doi.org/10.1016/j.polymer.2018.04.051
  20. Stojanovska, E., Canbay, E., Serife Pampal, E., D. Calisir, M., Agma, O., Polat, Y., Simsek, R., Serhat Gundogdu, N. A., Akgul, Y., & Kilic, A. (2016). A review on non-electro nanofibre spinning techniques. RSC Advances, 6(87), 83783–83801. https://doi.org/10.1039/C6RA16986D
  21. Toptas, A., Calisir, M. D., Gungor, M., & Kilic, A. (2024). Enhancing filtration performance of submicron particle filter media through bimodal structural design. Polymer Engineering & Science, 64(2), 901–912. https://doi.org/10.1002/pen.26593
  22. Toptaş, A., Çalışır, M. D., & Kılıç, A. (2023). Production of Ultrafine PVDF Nanofiber-/Nanonet-Based Air Filters via the Electroblowing Technique by Employing PEG as a Pore-Forming Agent. ACS Omega, 8(41), 38557–38565. https://doi.org/10.1021/acsomega.3c05509
  23. Toptaş, A., Çalışır, M., & Kılıç, A. (2024). Optimization of Electro-Blown PVDF Nanofibrous Mats for Air Filter Applications. El-Cezeri, 11(2), 199–206.
  24. Zapletalova, T., Michielsen, S., & Pourdeyhimi, B. (2006). Polyether Based Thermoplastic Polyurethane Melt Blown Nonwovens. Journal of Engineered Fibers and Fabrics, 1(1), 155892500600100105. https://doi.org/10.1177/155892500600100105