SavedAdd your journal

Journals / Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2026 / Cilt: 9 Sayı: 3

Classification of Immobilization Hand and Wrist Orthoses and Investigation of Their Mechanical Properties

İmmobilizasyon El ve Bilek Ortezlerinin Sınıflandırılması ve Mekanik Özelliklerinin İncelenmesi

Berrin Akkuş(SELÇUK ÜNİVERSİTESİ)
İlker Cengiz(SELÇUK ÜNİVERSİTESİ)
Pages
1797–1818
Publication Date
2026-06-16
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The advantages, disadvantages, and clinical applications of polymer, composite, metal-supported structures, and 3D-printed biopolymers are discussed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An orthosis is a three-dimensional material that supports any part of the body, corrects deformities, and reduces pain caused by deformation.
📊
Key Findings & Data:Immobilizing hand and wrist orthoses are medical devices used in traumatic injuries, postoperative care, neurological diseases, and chronic joint disorders, supporting the healing process by restricting joint movement.
💡
Conclusion & Impact:The advantages, disadvantages, and clinical applications of polymer, composite, metal-supported structures, and 3D-printed biopolymers are discussed.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:immobilizasyon · el-bilek ortezi · ortez

Abstract

An orthosis is a three-dimensional material that supports any part of the body, corrects deformities, and reduces pain caused by deformation. Immobilizing hand and wrist orthoses are medical devices used in traumatic injuries, postoperative care, neurological diseases, and chronic joint disorders, supporting the healing process by restricting joint movement. This review classifies immobilizing hand and wrist orthoses according to their function, material, and manufacturing method. The chemical and mechanical properties of different material groups are compared based on available literature. The advantages, disadvantages, and clinical applications of polymer, composite, metal-supported structures, and 3D-printed biopolymers are discussed.

Özet

Ortez vücudun herhangi bir bölgesini destekleyen, şekil bozukluklarını düzelten, deformasyonun neden olduğu ağrıyı azaltan 3 boyutlu bir malzemedir. İmmobilize el ve bilek ortezleri, travmatik yaralanmalar, postoperatif bakım, nörolojik hastalıklar ve kronik eklem rahatsızlıklarında kullanılan, eklem hareketini kısıtlayarak iyileşme sürecini destekleyen tıbbi cihazlardır. Bu derlemede, immobilizasyon amaçlı el ve bilek ortezleri fonksiyonlarına, malzemelerine ve üretim yöntemlerine göre sınıflandırılmış; farklı malzeme gruplarının kimyasal ve mekanik özellikleri mevcut literatür verileri ışığında karşılaştırılmıştır. Polimer, kompozit, metal destekli yapılar ve 3D baskı biyopolimerlerin avantajları, dezavantajları ve klinik uygulama alanları tartışılmıştır.

🔖

Cite This Article

Akkuş, B., Cengiz, İ. (2026). Classification of Immobilization Hand and Wrist Orthoses and Investigation of Their Mechanical Properties. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 9 Sayı: 3, 1797–1818. https://doi.org/10.47495/okufbed.1787463

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (99)

  1. Albilali AT., Baras BH., Aldosari MA. Evaluation of mechanical properties of different thermoplastic orthodontic retainer materials after thermoforming and thermocycling. Polymers 2023; 15: 1610.
  2. Alexander J., Dawson J., Langhorne P. Dynamic hand orthoses for the recovery of hand and arm function in adults after stroke: A systematic review and meta-analysis of randomised controlled trials. Top Stroke Rehabil. 2022; 29(2): 114-124.
  3. Amin MR., Khondoker MAH. Design and characterization of additively manufactured patient-specific wrist hand orthosis. Eng. Proc. 2024; 76: 69.
  4. Andringa A., van de Port I., Meijer JW. Long-term use of a static hand-wrist orthosis in chronic stroke patients: a pilot study. Stroke Res Treat. 2013; 2013a: 546093.
  5. Andringa AS., Van de Port IG., Meijer JW. Tolerance and effectiveness of a new dynamic hand-wrist orthosis in chronic stroke patients. Neuro Rehabilitation 2013b; 33(2): 225-31.
  6. Aranceta-Garza A., Ross K., Buhler M., Rameckers E. A comparative study of efficacy and functionality of ten commercially available wrist-hand orthoses in healthy females: Wrist range of motion and grip strength analysis. Front Rehabil Sci. 2021; 15(2): 687554.
  7. Baker MI., Walsh SP., Schwartz Z., Boyan BD. A review of polyvinyl alcohol and its uses in cartilage and orthopedic applications. J Biomed Mater Res B Appl Biomater 2012; 100(5): 1451-7.
  8. Banaszek K., Klimek L., Dąbrowski JR., Jastrzębski W. Fretting wear in orthodontic and prosthetic alloys with Ti(C, N) Coatings. Processes 2019; 7: 874.
  9. Barrett PC., Hackley DT, Samuel LT., Apel PJ. Immobilization and hand therapy after carpometacarpal arthroplasty: A systematic review. J Hand Surg Glob Online. 2022; 4(5): 255-262.
  10. Başar B., Polat A. Safety evaluation of early active and passive motion without immobilization in metacarpal fractures. J Acad Res Med. 2021; 15; 11(3): 283-287.
  11. Blomstrand J., Sellbrant I., Nellgård B. Removable brace is as good as plaster cast after surgically treated distal radius fracture – a randomised controlled study of pain and wrist function. J Orthop Surg Res 2025; 20: 691
  12. Bula-Oyola E., Belda-Lois JM., Porcar-Seder R., Page A. Aspects determining adherence to wrist-hand orthoses in patients with peripheral neuropathies. Technology and Disability 2022; 34(4): 247-260.
  13. Cantero-Téllez R., Villafañe JH., Valdes K., Berjano P., Effect of immobilization of metacarpophalangeal joint in thumb carpometacarpal osteoarthritis on pain and function. A quasi-experimental trial. Journal of Hand Therapy 2018; 31(1): 68-73.
  14. Casey J., Dunn WJ., Wright E. In vitro wear of various orthotic device materials. J Prosthet Dent. 2003; 90(5): 498-502.
  15. Cavanaugh PK., Watkins C., Jones C., Maltenfort MG., Beredjiklian PK., Rivlin M. Effectiveness of quickcast versus custom-fabricated thermoplastic orthosis immobilization for the treatment of mallet fingers: A randomized clinical trial. Hand (N Y) 2022; 17(6): 1090-1097.
  16. Challoumas D., Ramasubbu R., Rooney E., Seymour-Jackson E., Putti A., Millar NL. Management of de quervain tenosynovitis: A systematic review and network meta-analysis. JAMA Netw Open 2023; 6(10): e2337001.
  17. Chan HL., Ng GY. Effect of counterforce forearm bracing on wrist extensor muscles performance. Am J Phys Med Rehabil. 2003; 82(4): 290-5.
  18. Chen Gq., Wang Y. Medical applications of biopolyesters polyhydroxyalkanoates. Chin J Polym Sci. 2013; 31: 719–736.
  19. Ciccone WJ., Motz C., Bentley C., Tasto JP. Bioabsorbable implants in orthopaedics: new developments and clinical applications. J Am Acad Orthop Surg. 2001; 9(5): 280-288.
  20. Clementson M., Thomsen N., Jørgsholm P., Besjakov J., Björkman A. Is early mobilisation better than immobilisation in the treatment of wrist sprains? J Plast Surg Hand Surg. 2016; 50(3): 156-60.
  21. Collier SE., Thomas JJ. Range of motion at the wrist: a comparison study of four wrist extension orthoses and the free hand. Am J Occup Ther. 2002; 56(2): 180-184.
  22. Cunningham MW., Yousif NJ., Sanger JR., Gingrass RP., Matloub HS. Aquaplast for nasal splinting. Ann Plast Surg. 1984; 13(4): 357-358.
  23. Çalış HT., Aslaner H., Sunkak, SD., Sedefoğlu N., Sütbeyaz ST., Güler E. Comparison of therapeutic effectiveness between kinesio taping technique and static resting splint in carpal tunnel syndrome. European Journal of Therapeutics 2021; 27(1): 14–19.
  24. De Almeida PHTQ., Santos BB., Bernardo LD., MacDermid JC. Does thermoplastics' thickness influence joint stabilization and movement coordination? An inferential study of wrist orthoses. Prosthet Orthot Int. 2022; 1;46(6): 633-640.
  25. De Angelis MV., Pierfelice F., Di Giovanni P., Staniscia T., Uncini A. Efficacy of a soft hand brace and a wrist splint for carpal tunnel syndrome: a randomized controlled study. Acta Neurol Scand. 2009; 119(1): 68-74.
  26. Delisa JA., Greenberg S. Orthotic management of upper extremity disorders. American Family Physician 1981; 24(3): 145–152.
  27. Diaz R., Ebramzadeh E., Yao J. Variations in postoperative immobilization following common hand surgery procedures. Hand (N Y). 2016; 11(1): 45-49.
  28. Dong C., Davies IJ. Mechanical properties of continuous glass fibre-reinforced composites made by material extrusion. Prog Addit Manuf 2024; 9: 2131–2141.
  29. Fang JJ., Lin CL., Tsai JY., Lin RM. Clinical assessment of customized 3d-printed wrist orthoses. Appl. Sci. 2022; 12: 11538.
  30. Filipova V., Lonzarić D., Jesenšek Papež B. Efficacy of combined physical and occupational therapy in patients with conservatively treated distal radius fracture: randomized controlled trial. Wien Klin Wochenschr. 2015; 127(5): 282-287.
  31. Gallucci GL., Boretto JG., Dávalos MA., Alfie VA., Donndorff A., De Carli P. The use of dynamic orthoses in the treatment of the stiff elbow. Eur J Orthop Surg Traumatol. 2014; 24(8): 1395-400.
  32. Georgiew FS., Florek J., Janowiec S., Florek P. The use of orthoses in the treatment of carpal tunnel syndrome. A review of the literature from the last 10 years. Reumatologia. 2022; 60(6): 408-412.
  33. Gnyawali SC., Denune JA., Hockman B., Kristjánsdóttir JV., Ragnarsdóttir MS., Timsina LR., Ghatak S., Lechler K., Sen CK., Roy S. Moisture mitigation using a vented liner and a vented socket system for individuals with transfemoral amputation. Sci Rep. 2023; 2;13(1): 16557.
  34. Górski F., Zawadzki P., Wichniarek R., Kuczko W., Żukowska M., Wesołowska I., Wierzbicka N. Automated design of customized 3D-printed wrist orthoses on the basis of 3D scanning. Computational and Experimental Simulations in Engineering. ICCES 2019; 75.
  35. Habiba R., Amaro A., Trindade D., Moura C., Silva R., Antão A., Martins RF., Malça C., Branco R. Comparative analysis of impact strength among various polymeric materials for orthotic production. Polymers 2024; 16: 1843.
  36. Hachisuka K., Makino K., Wada F., Saeki S., Yoshimoto N., Arai M. Clinical application of carbon fibre reinforced plastic leg orthosis for polio survivors and its advantages and disadvantages. Prosthet Orthot Int. 2006a; 30(2): 129-35.
  37. Hachisuka K., Makino K., Wada F., Saeki S., Yoshimoto K., Ogata H. Biomechanical evaluation of wrist-hand orthoses using different materials. Prosthetics and Orthotics International 2006b; 30(3): 287–295.
  38. Haskett S., Backman C., Porter B., Goyert J., Palejko G. A crossover trial of custom-made and commercially available wrist splints in adults with inflammatory arthritis. Arthritis Rheum. 2004; 15; 51(5): 792-799.
  39. Hirata J., Yoshimura M., Inoue K. Effect of wrist orthoses on upper limb function, activities of daily living, and stress response. J Rehabil Assist Technol Eng. 2024; (11)5.
  40. Hutchinson DT., Sueoka S., Wang AA., Tyser AR., Papi-Baker K., Kazmers NH. A prospective, randomized trial of mobilization protocols following ligament reconstruction and tendon interposition. J Bone Joint Surg Am. 2018; 1; 100(15): 1275-1280.
  41. Jamnik AA., Pirkle S., Chacon J., Xiao AX., Wagner ER., Gottschalk MB. The effect of immobilization position on functional outcomes and complications associated with the conservative treatment of distal radius fractures: A systematic review. J Hand Surg Glob Online. 2021; 4(1): 25-31.
  42. Joselin R., Wilson WJ. Investigation on impact strength properties of kevlar fabric using different shear thickening fluid composition. Defence Science Journal 2014; 64(3): 236–243.
  43. Kang D., Zhang Y., Yu DG. Integrating synthetic polypeptides with innovative material forming techniques for advanced biomedical applications. J Nanobiotechnol 2025; 23: 101.
  44. Kim SJ., Kim SJ., Cha YH., Lee KH., Kwon J-Y. Effect of personalized wrist orthosis for wrist pain with three-dimensional scanning and printing technique: A preliminary, randomized, controlled, open-label study. Prosthetics and Orthotics International 2018; 42(6): 636-643.
  45. Kitahara A., Hamaoka T., Murase N., Homma T., Kurosawa Y., Ueda C., Nagasawa T., Ichimura S., Motobe M., Yashiro K., Nakano S., Katsumura T. Deterioration of muscle function after 21-day forearm immobilization. Med Sci Sports Exerc. 2003; 35(10): 1697-702.
  46. Kjeken I., Møller G., Kvien TK. Use of commercially produced elastic wrist orthoses in chronic arthritis: a controlled study. Arthritis Care Res. 1995; 8(2): 108-113.
  47. Klopfer T., Hemmann P., Rupprecht V., Stuby F., Stöckle U., Meder A. Outcome analysis of distal radius fracture with orthosis versus cast immobilization after palmar plate osteosynthesis: A randomized controlled study. J Pers Med. 2023; 13(1): 130.
  48. Kobayashi M., Toguchida J., Oka M. Development of the shields for tendon injury repair using polyvinyl alcohol--hydrogel ( PVA-H). J Biomed Mater Res. 2001; 58(4): 344-351
  49. Koller M. Biodegradable and biocompatible polyhydroxy-alkanoates (PHA): Auspicious microbial macromolecules for pharmaceutical and therapeutic applications. Molecules 2018; 23(2): 362.
  50. Li B., Zhao Z., Ma P. Mechanical properties of flexible composites reinforced with high-performance glass fiber multi-axial warp-knitted fabrics. Journal of Industrial Textiles 2023; 53.
  51. Li G., Yang J., Feng P., Li X., Chen W. Biomechanical analysis of rheumatoid arthritis of the hand and the design of orthotics: A finite element study. Bioengineering 2025; 12: 462.
  52. Lim J., Choi A., Kim B. The effects of resistance training on pain, strength, and function in osteoarthritis: Systematic review and meta-analysis. J. Pers. Med. 2024; 14: 1130.
  53. Liu CT., Liu DH., Chen CJ. Effects of wrist extension on median nerve and flexor tendon excursions in patients with carpal tunnel syndrome: a case control study. BMC Musculoskelet Disord 2021; 22: 477.
  54. Łukaszewski K., Wichniarek R., Górski F. Determination of the elasticity modulus of additively manufactured wrist hand orthoses. Materials (Basel) 2020; 13(19): 4379.
  55. Lutfi SNN., Abd Razak NA., Ali S., Gholizadeh H. Compression and tension behavior of the prosthetic foam materials polyurethane, EVA, Pelite™ and a combination of polyurethane and EVA: a preliminary study. Biomed Tech (Berl). 2020; 66(3): 317-322
  56. May-Lisowski T.L., King P.M. Effectiveness of wrist orthoses in the management of upper extremity dysfunction. American Journal of Occupational Therapy 2008; 62(5): 530–538.
  57. McVeigh JA., Pennell C., Hurley DA. Composite materials in upper limb orthoses: Mechanical performance and clinical implications. Journal of Hand Therapy 2021a; 34(2): 256–264.
  58. McVeigh KH., Berger TG., Cudahy R., Dekker TM., Brigham TJ., Braxton JC. An evidence-based approach to casting and orthosis management of the pediatric, adolescent, and young adult population for injuries of the upper extremity: A review article. Clin J Sport Med. 2021b; 1;31(2):151-162.
  59. Miles MP., Clarkson PM., Bean M., Ambach K., Mulroy J., Vincent K. Muscle function at the wrist following 9 d of immobilization and suspension. Med Sci Sports Exerc. 1994; 26(5): 615-623.
  60. Millard GM., Budoff JE., Paravic V., Noble PC. Functional bracing for distal radioulnar joint instability. J Hand Surg Am. 2002; 27(6): 972-7.
  61. Nelham RL. Carbon fibre reinforced plastic applied to prosthetics and orthotics. J Biomed Eng. 1981; 3(4): 305-314.
  62. Nordenskiöld U. Elastic wrist orthoses. Reduction of pain and increase in grip force for women with rheumatoid arthritis. Arthritis Care Res. 1990; 3(3): 158-162.
  63. Petersen R. Carbon fiber biocompatibility for implants. Fibers (Basel) 2016; 4(1): 1.
  64. Popescu, D., Baciu F., Vlăsceanu D., Marinescu R., Lăptoiu D. Investigations on the fatigue behavior of 3d-printed and thermoformed polylactic acid wrist–hand orthoses. Polymers 2023; 15: 2737.
  65. Raj R., Dixit AR., Łukaszewski K., Wichniarek R., Rybarczyk J., Kuczko W., Górski F. Numerical and experimental mechanical analysis of additively manufactured ankle-foot orthoses. Materials (Basel) 2022; 15(17): 6130.
  66. Ramírez-Rios LY., Camargo-Wilson C., Olguín-Tiznado JE., López-Barreras JA., Inzunza-González E., García-Alcaraz JL. Design of a modular plantar orthosis system through the application of TRIZ methodology tools. Appl. Sci. 2021; 11: 2051.
  67. Rasmussen HC., Bang M., Lilleøre JG., Kipp JO., Lindgren L., Brüel A., Bue M., Mikkelsen MKD., Thomsen JS., Stilling M. Short arm splints for wrist stabilization: A mechanical material test and cadaveric radiography study. J Exp Orthop. 2024; 11(4): e70065.
  68. Redaelli DF., Abbate V., Storm FA. 3D printing orthopedic scoliosis braces: a test comparing FDM with thermoforming. Int J Adv Manuf Technol 2020; 111: 1707–1720.
  69. Rybarczyk J., Kuczko W., Wichniarek R., Górski F., Żukowska M. Study of individualized leg orthoses made by 3D Printing of composite material. Innovations in Biomedical Engineering 2023; 875: 59-67.
  70. Ryu JH., Kwon JS., Jiang HB., Cha JY., Kim KM. Effects of thermoforming on the physical and mechanical properties of thermoplastic materials for transparent orthodontic aligners. Korean J Orthod. 2018; 48(5): 316-325.
  71. Sala F., D’Urso G., Giardini C. Customized wrist immobilization splints produced via additive manufacturing-A comprehensive evaluation of the viable configurations. Prosthesis 2023; 5: 792-808.
  72. Schulz M., Heilemann M., Wendler T., Heyde CE., Schleifenbaum S., Osterhoff G., Wiersbicki D. Comparison of the immobilizing effect of soft, semi-rigid and rigid neck orthoses. Eur Spine J. 2025; 34(8): 3214-3221.
  73. Seegmiller DB., Eggett DL., Charles SK. The effect of common wrist orthoses on the stiffness of wrist rotations. J Rehabil Res Dev. 2016; 53(6):1151-1166.
  74. Shah J., Patel D., Rananavare D., Hudson D., Tran M., Schloss R., Langrana N., Berthiaume F., Kumar S. Recent advancements in chitosan-based biomaterials for wound healing. J Funct Biomater. 2025; 16(2): 45.
  75. Shahar FS., Sultan MTH., Lee SH., Jawaid M., Md Shah AU., Safri SNA., Sivasankaran PN. A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis. Journal of the Mechanical Behavior of Biomedical Materials. 2019; 99: 169-185.
  76. Sheehan C., Figgins E. A comparison of mechanical properties between different percentage layups of a single-style carbon fibre ankle foot orthosis. Prosthetics and Orthotics International. 2016; 41(4): 364-372.
  77. Shin SH., Park T., Hong E., Kwak DS., Chung YG. Stabilization of the distal radioulnar joint with or without triangular fibrocartilage complex tear by an external wrist band brace: A cadaveric study. Healthcare 2022; 10: 828.
  78. Stern EB, Sines B, Teague TR. Commercial wrist extensor orthoses. Hand function, comfort, and interference across five styles. J Hand Ther. 1994 Oct-Dec; 7(4): 237-44.
  79. Stern EB., Ytterberg SR., Krug HE., Larson LM., Portoghese CP., Kratz WN., Mahowald ML. Commercial wrist extensor orthoses: a descriptive study of use and preference in patients with rheumatoid arthritis. Arthritis Care Res. 1997; 10(1): 27-35.
  80. Sun W., Luo Y., Sun H. Experimental studies on the elastic properties of carbon fiber reinforced polymer composites prefabricated of unidirectional carbon fiber fabrics and a modified rule of mixtures in the parallel direction. Advanced Composites Letters. 2018; 27(1).
  81. Thiele J., Nimmo R., Rowell W., Quinn S., Jones G. A randomized single blind crossover trial comparing leather and commercial wrist splints for treating chronic wrist pain in adults. BMC Musculoskelet Disord. 2009; 10: 129.
  82. Trindade D., Habiba R., Fernandes C., Costa AA., Silva R., Alves N., Martins R., Malça C., Branco R., Moura C. Material performance evaluation for customized orthoses: Compression, flexural, and tensile tests combined with finite element analysis. Polymers (Basel) 2024; 16(18): 2553
  83. Tudor George A., Diana P., Stochioiu C., Florin B. Experimental and numerical investigations on the thermoforming of 3D-printed polylactic acid parts. Rapid Prototyping Journal 17 May 2024; 30 (5): 928–946. Uthaman A., Xian G., Thomas S., Wang Y., Zheng Q., Liu X. Durability of an epoxy resin and Its carbon fiber- reinforced polymer composite upon immersion in water, acidic, and alkaline solutions. Polymers 2020; 12: 614.
  84. Van Buijtenen JM., van Delft EA., Rijsdijk M., Dobbe J., van der Veen A., Streekstra GJ., Bloemers FW. Functional bracing in distal radius fractures: A cadaveric pilot study. Orthop Rev (Pavia). 2022; 14(4): 36574.
  85. Van Delft EAK., van Bruggen SGJ., van Stralen KJ. Four weeks versus six weeks of immobilization in a cast following closed reduction for displaced distal radial fractures in adult patients: a multicentre randomized controlled trial. Bone Joint J. 2023; 105-B(9): 993-999.
  86. Vanek J., Ovsik M., Stanek M., Hanzlik J., Pata V. Study of injection molding process to improve geometrical quality of thick-walled polycarbonate optical lenses by reducing sink marks. Polymers 2024; 16: 2318.
  87. Vlăsceanu D., Popescu D., Baciu F., Stochioiu C. Examining the flexural behavior of thermoformed 3D-printed wrist-hand orthoses: Role of material, infill density, and wear conditions. Polymers (Basel) 2024; 16(16): 2359.
  88. Von Haller M., Couchman L., Honigmann P. Production time and practicability of 3D-Printed wrist orthoses versus low temperature thermoplastic wrist orthoses. Hand Therapy. 2024; 29(4):188-194.
  89. Waldburger L., Schaller R., Furthmüller C., Schrepfer L., Schaefer DJ., Kaempfen A. 3D-printed hand splints versus thermoplastic splints: A randomized controlled pilot feasibility trial. Int J Bioprint. 2021; 8(1): 474.
  90. Wang Z., Yuan W. Effects of elastic ankle braces on dynamic stability in patients with functional ankle instability. Am J Transl Res. 2024; 16(12): 7354-7363.
  91. Watson N., Haines T., Tran P., Keating JL. A comparison of the effect of one, three, or six weeks of immobilization on function and pain after open reduction and internal fixation of distal radial fractures in adults: A randomized controlled trial. J Bone Joint Surg Am. 2018; 100(13): 1118-1125.
  92. Williamson JN., Grunst MM., Lynn J., Williamson GA., Blanck RV., Wilken JM. Short-term effect of a carbon fiber custom dynamic orthosis and integrated rehabilitation on self-reported physical function, pain, speed, and agility in civilians. Prosthet Orthot Int. 2023; 47(6): 607-613.
  93. Windt JWV., Akkerman W., Hofstra M., Meussen P. Reduced pain and improved daily activities for individuals with hand osteoarthritis using a silicone wrist hand orthosis. J Hand Ther. 2023; 36(3): 669-677.
  94. Wong CR., Karpinski M., Hatchell AC., McRae MH., Murphy J., McRae MC. Immobilization of the wrist after dorsal wrist ganglion excision: A systematic review and survey of current practice. HAND 2021; 18(2): 254-263.
  95. Woythal L., Hølmer P., Brorson S. Splints, with or without wrist immobilization, following surgical repair of flexor tendon lesions of the hand: A systematic review. Hand Surg Rehabil. 2019; 38(4): 217-222.
  96. Xia W., Bai Z., Dai R., Zhang J., Lu J., Niu W. The effects of sensory re-education on hand function recovery after peripheral nerve repair: A systematic review. Neuro Rehabilitation 2021; 48(3): 293-304.
  97. Yang YS., Tseng CH., Fang WC., Han IW., Huang SC. Effectiveness of a New 3D-printed dynamic hand–wrist splint on hand motor function and spasticity in chronic stroke patients. J. Clin. Med. 2021; 10: 4549.
  98. Zhang F., Jiang H., Lu Z., Yang H., Zhang Q., Mi J., Rui Y., Zhao G. The significance of wrist immobilization for endoscopic carpal tunnel release. Front Neurol. 2023; 25(14): 1081440.
  99. Zhou Z., Li X., Wu X., Wang X. Impact of early rehabilitation therapy on functional outcomes in patients post distal radius fracture surgery: a systematic review and meta-analysis. BMC Musculoskelet Disord. 2024; 25(1): 198.