Journals / Natural and Engineering Sciences / 2026 / Volume: 1 Issue: 2

A 5th order video band elliptic filter topology using OTRA based Fleischer Tow Biquad with MOS-C Realization

Pages
—
Publication Date
2016-05-10
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

After designing the 5th order video band elliptic filter topology, the MOS-C realization is obtained and used in PSPICE simulation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A new 5th order video band elliptic filter topology is presented.
📊
Key Findings & Data:The proposed 5th-order lowpass filter was simulated with PSPICE simulation program.
💡
Conclusion & Impact:After designing the 5th order video band elliptic filter topology, the MOS-C realization is obtained and used in PSPICE simulation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Operational Transresistance Amplifeir · Video filter applications · High order eliptic filters

Abstract

A new 5th order video band elliptic filter topology is presented. In video applications high order elliptic filters were used. The proposed 5th-order lowpass filter was simulated with PSPICE simulation program. The elliptic filter configuration consists of two cascade connected lowpass notch filters and a lowpass filter which is obtained using OTRA based Fleischer Tow biquad. After designing the 5th order video band elliptic filter topology, the MOS-C realization is obtained and used in PSPICE simulation.

🔖

Cite This Article

Gökçen, A., Çam, U. (2016). A 5th order video band elliptic filter topology using OTRA based Fleischer Tow Biquad with MOS-C Realization. Natural and Engineering Sciences, Volume: 1 Issue: 2. https://doi.org/10.28978/nesciences.286253

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (23)

  1. Fleischer, P.E., Tow, J., “Design formulas for biquad active filters using three operational amplifiers”, Proceedings of the IEEE, Proceeding Letters, Vol. 61, pp. 662-663, 1973.
  2. Gökçen, A., Kılınç, S., & Çam, U. 2007. Tek OTRA Kullanılarak Tümlestirmeye Uygun İkinci Derece Analog Süzgeç Tasarımları. IEEE 15th Signal Processing and Communications Applications Conference (SIU2007), Eskisehir / Turkey, 11-13 June 2007.
  3. Gökçen, A. & Çam, U. 2009a. MOS-C Single Amplifier Biquad Using the Operational Transresistance Amplifier. International Journal of Electronics and Communications. (AEÜ), 63, 660–664.
  4. Gökçen, A., Kılınç, S., & Çam, U. 2010. Fully Integrated Universal Biquads Using Operational Transresistance Amplifiers with MOS-C Realization. Turkish Journal of Electrical Engineering & Computer Science, vol.19,no:3, 2011.
  5. Gökçen, 2010. “New Possibilities in The Design of Analog Integrated Circuit with MOS-C Realization”, Phd Thesis, Graduate School of Natural and Applied Sciences, Dokuz Eylül University, İzmir, Turkey, June, 2010.
  6. Horng, J. W., Lay, J. R., Chang, C. W., Lee, M. H. 1997. High input impedance voltage-mode multifunction filters using plus-type CCIIs. Electronics Letters, 33, 472–475.
  7. Kerwin, W., Huelsman, L., Newcomb, R., “State variable synthesis for insensitive integrated circuit transfer functions”,IEEE J. Solid State Circuits, Vol. 2, pp. 87-92, 1967.
  8. Koton, J., Herencsar, N., Vrba, K., “KHN-equivalent voltage-mode filters using universal voltage conveyors”, International Journal Electron. Commun. (AEU), doi:10.1016/j.aeue.2010.02.005, 2010.
  9. Liu, S. I., & Lee, J. L. 1996. Insensitive current/voltage-mode filters using FTFNs. Electronics Letters, (32), 1079–1080.
  10. Salama, K. N., & Soliman, A. M. 2000. Active RC applications of the operational transresistance amplifier. Frequenz Journal, 54, 171–176.
  11. Liu, S. I., Chen, J. J., Tsao, H. W., & Tsay, J. H. 1993. Design of biquad filters with a single current follower. IEE Proceedings Circuits Devices Systems, (140),165-170.
  12. Liu, S. I., & Tsao, H. W. 1991. The single CCII biquads with high-input impedance. IEEE Transactions on Circuit and Systems, 38, 456–461.
  13. Salama, K. N., & Soliman, A. M. 1999. CMOS operational transresistance amplifier for analog signal processing applications. Microelectronics Journal, 30, 235-245.
  14. Senani, R., Singh,V.K., “KHN-equivalent biquad using current conveyors”, Electronics Letters, Vol. 31, pp. 626-628,1995.
  15. Shah, S., Bhaskar,D.R., “Design of KHN biquad using operational transconductance amplifier”, The 2002 45thMidwest Symposium on Circuit and Systems, Vol. 1, pp. 48-51, 2002.
  16. Soliman, A.M., “Kerwin-Huelsman-Newcomb circuit using current conveyors”, Electronics Letters, Vol. 30, 2019-2020, 1994.
  17. Soliman, A.M., “Voltage mode and current mode Tow Thomas biquadratic filters using ICCII”, International Journalof Circuit Theory and Applications, Vol. 35, pp. 463-467, 2007.
  18. Soliman, A.M., “Kerwin-Huelsman-Newcomb circuit using inverting current conveyors”, Journal of Active andPassive Electronic Devices, Vol. 3, pp. 273-279, 2008.
  19. Thomas, L.C., “The biquad: Part – Some practical design considerations”, IEEE Trans. Circuit Theory, Vol. CT-18,pp. 350-257, 1971.
  20. Tow J., “Active RC filters – A state-space realization”, Proceedings of the IEEE, Proceeding Letters, Vol. 56, pp.1137-1139, 1968.
  21. Koton, J., Herencsar, N., Vrba, K., “KHN-equivalent voltage-mode filters using universal voltage conveyors”, International Journal Electron. Commun. (AEU), doi:10.1016/j.aeue.2010.02.005, 2010.
  22. Salama, K. N., & Soliman, A. M. 2000. Active RC applications of the operational transresistance amplifier. Frequenz Journal, 54, 171–176.
  23. Shah, S., Bhaskar,D.R., “Design of KHN biquad using operational transconductance amplifier”, The 2002 45thMidwest Symposium on Circuit and Systems, Vol. 1, pp. 48-51, 2002.