Journals / Natural and Engineering Sciences / 2026 / Volume: 10 Issue: 1

Additives Versus Subtractive Fabricated Techniques and Materials Types and their Impact on the Fracture Resistance of Ceramic Crown

Pages
—
Publication Date
2025-04-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

To conclude, Value of Fracture resistance can have an impact because of the kind of material whereas there is no significant impact because of the preparation method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Because of the evolvement of digitalized dentistry and the need of a restoration that is fixed, there has been an introduction of many materials related to 3D printing in today’s market.
📊
Key Findings & Data:The purpose of this study is to evaluate the resistance of fractures by comparing materials of ceramic which are of four kinds and they are zirconia-reinforced lithium disilicate, also Emax cad, and IPSS emax as well as 3Dprinting nanoceramic.
💡
Conclusion & Impact:To conclude, Value of Fracture resistance can have an impact because of the kind of material whereas there is no significant impact because of the preparation method.
🔬Design:Research Article
📍Scope:6sample
⚙️Variables:Zirconia-lithium silicate · 3D printing · CAD-CAM

Abstract

Because of the evolvement of digitalized dentistry and the need of a restoration that is fixed, there has been an introduction of many materials related to 3D printing in today’s market. The purpose of this study is to evaluate the resistance of fractures by comparing materials of ceramic which are of four kinds and they are zirconia-reinforced lithium disilicate, also Emax cad, and IPSS emax as well as 3Dprinting nanoceramic. Methods: 24 crowns were prepared (6sample for each type of the material) used in the study. And undergone artificial ageing before testing using the universal testing machine. Submission of results in SPSS for tests like Kruskal-Wallis as well as nonparametric test proved the difference in each material of ceramics and it differed at p ≤ 0.05 whereas in the methods used there is no such difference. The material which showed a resistance for fractures with a high value was the samples of ZLS which was about 1473.1 and the material which showed a resistance for fractures with a low value was the Emax cad and it was about 1013.7. To conclude, Value of Fracture resistance can have an impact because of the kind of material whereas there is no significant impact because of the preparation method.

🔖

Cite This Article

Salman, Z. A., Hasan, N. H., Abdulmajeed, A. A. (2025). Additives Versus Subtractive Fabricated Techniques and Materials Types and their Impact on the Fracture Resistance of Ceramic Crown. Natural and Engineering Sciences, Volume: 10 Issue: 1. https://doi.org/10.28978/nesciences.1613417

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (29)

  1. Abbood, MH, & Al-Hashimi, RA (2016). In vitro comparative assessment of composite nanoleakage using various dentine surface treatments. Journal of the College of Dentistry, University of Baghdad, 325 (3955), 1-7.
  2. Al Hamad, K. Q., Al‐Rashdan, R. B., Al‐Rashdan, B. A., & Baba, N. Z. (2021). Effect of milling protocols on trueness and precision of ceramic crowns. Journal of Prosthodontics, 30(2), 171-176. https://doi.org/10.1111/jopr.13245
  3. Alsarani, M. M. (2023). Influence of aging process and restoration thickness on the fracture resistance of provisional crowns: A comparative study. The Saudi Dental Journal, 35(8), 939-945.‏ https://doi.org/10.1016/j.sdentj.2023.07.017
  4. Ashour, A. M., El-Kateb, M. M., & Azer, A. S. (2024). The effect of two preparation designs on the fracture resistance and marginal adaptation of two types of ceramic crowns using CAD/CAM technology (In vitro study). BMC Oral Health, 24(1), 1065. https://doi.org/10.1186/s12903-024-04742-4
  5. Bita, S., Balouch, A., & Mohammadian, T. (2021). Determination of lethal concentration (LC50) of silver nanoparticles produced by biological and chemical methods in Asian seabass fish. International Journal of Aquatic Research and Environmental Studies, 1(2), 7-12. https://doi.org/10.70102/IJARES/V1I2/2
  6. Donmez, M. B., Çakmak, G., Yılmaz, D., Schimmel, M., Abou-Ayash, S., Yilmaz, B., & Peutzfeldt, A. (2024). Bond strength of additively manufactured composite resins to dentin and titanium when bonded with dual-polymerizing resin cements. The Journal of Prosthetic Dentistry, 132(5), 1067-e1. https://doi.org/10.1016/j.prosdent.2023.04.003
  7. Elraggal, A., Aboushelib, M., Abdel Raheem, I. M., & Afifi, R. R. (2022). Effect of surface treatments on biaxial flexural strength, fatigue resistance, and fracture toughness of high versus low translucency zirconia. BMC Oral Health, 22(1), 412. https://doi.org/10.1186/s12903-022-02431-8
  8. Elsayed, M., Sherif, R., & El-khodary, N. (2020). Fracture resistance of Vita suprinity versus IPS e. max CAD vonlays restoring premolars (An in vitro study). Int J Appl Dent Sci, 6(3), 734-41.‏ https://doi.org/10.22271/oral.2020.v6.i3k.1029
  9. Jalili, S. H., Motallebi, A. A., Noghani, F., Rahnama, M., Seifzadeh, M., & Khodabandeh, F. (2021). Amino acids profile changes of silver carp (Hypophthalmichthys molitrix) skin hydrolysate during hydrolyzing by Alcalase. International Journal of Aquatic Research and Environmental Studies, 1(2), 29-37. https://doi.org/10.70102/IJARES/V1I2/4
  10. Kollmuss, M., Kist, S., Goeke, J. E., Hickel, R., & Huth, K. C. (2016). Comparison of chairside and laboratory CAD/CAM to conventional produced all-ceramic crowns regarding morphology, occlusion, and aesthetics. Clinical Oral Investigations, 20, 791-797.‏ https://doi.org/10.1007/s00784-015-1554-9
  11. Kumar, R., & Rao, P. (2024). Intelligent 3d Printing for Sustainable Construction. Association Journal of Interdisciplinary Technics in Engineering Mechanics, 2(3), 22-29.
  12. Lien, W., Roberts, H. W., Platt, J. A., Vandewalle, K. S., Hill, T. J., & Chu, T. M. G. (2015). Microstructural evolution and physical behavior of a lithium disilicate glass–ceramic. Dental materials, 31(8), 928-940. https://doi.org/10.1016/j.dental.2015.05.003
  13. Maha, A. M., & Nayif, M. (2013). The effect of indirect veneering materials as light interpose on microhardness of dual cured resin cements. Al-Rafidain Dental Journal, 13(2), 290-295.
  14. Malbašić, V. (2021). The Strategy of Management and Utilization of Mineral Raw Materials in The Republic of Srpska Through the Globalization Era. https://doi.org/10.7251/afts.2021.1325.017M
  15. Mostofi, K. H. (2016). Evaluating the effect of upside and downside slope on flow hydraulic in cylindrical overflows by using Flow 3D software.
  16. Muralidharan, J. (2024). Innovative Materials for Sustainable Construction: A Review of Current Research. Innovative Reviews in Engineering and Science, 1(1), 16-20. https://doi.org/10.31838/INES/01.01.04
  17. Øilo, M., & Gjerdet, N. R. (2013). Fractographic analyses of all-ceramic crowns: a study of 27 clinically fractured crowns. Dental Materials, 29(6), e78-e84. https://doi.org/10.1016/j.dental.2013.03.018
  18. Padma, S., Umesh, S., Asokan, S., & Srinivas, T. (2017). Bite force measurement based on fiber Bragg grating sensor. Journal of biomedical optics, 22(10), 107002-107002. https://doi.org/10.1117/1.JBO.22.10.107002
  19. Revilla-León, M., Methani, M. M., Morton, D., & Zandinejad, A. (2020). Internal and marginal discrepancies associated with stereolithography (SLA) additively manufactured zirconia crowns. The Journal of prosthetic dentistry, 124(6), 730-737. https://doi.org/10.1016/j.prosdent.2019.09.018
  20. Riyadh, M., & Nayif, M. (2020). Evaluation of different zirconia surface treatments on their microhardness. Al-Rafidain Dental Journal, 20(2), 273-282. https://doi.org/10.33899/rden.2020.166475
  21. Rosentritt, M., Hahnel, S., Engelhardt, F., Behr, M., & Preis, V. (2017). In vitro performance and fracture resistance of CAD/CAM-fabricated implant supported molar crowns. Clinical oral investigations, 21, 1213-1219. https://doi.org/10.1007/s00784-016-1898-9
  22. Sadid-Zadeh, R., Sahraoui, H., Lawson, B., & Cox, R. (2021). Assessment of tooth preparations submitted to dental laboratories for fabrication of monolithic zirconia crowns. Dentistry Journal, 9(10), 112. https://doi.org/10.3390/dj9100112
  23. Seung-Mi, J. (2005). Dimensional stability of impression body using silicone index tooth tray impression system. The Journal of Korean Academy of Prosthodontics, 43(5), 622-632.
  24. Shackori, M., Hasan, N., Qasim, A., & Abdulmajeed, A. (2024). Evaluate the Shear Bond Strength for Alkasite in Comparison with other Esthetic Restorative Materials. Al-Rafidain Dental Journal, 24(1), 109-119. https://doi.org/10.33899/rdenj.2023.141870.1216
  25. Silveira, R. C., Cruz, L. O., Marcondes, C., Rodrigues, D. C., Carolyna, D., & Freitas, R. D. (2020). Influence of types of designs of dental structure preparations for a esthetic treatments with ceramic laminates–literature review. Int J Recent Scic Res, 11(03), 37901-10.
  26. Taha, D., Spintzyk, S., Sabet, A., Wahsh, M., & Salah, T. (2018). Assessment of marginal adaptation and fracture resistance of endocrown restorations utilizing different machinable blocks subjected to thermomechanical aging. Journal of Esthetic and Restorative Dentistry, 30(4), 319-328. https://doi.org/10.1111/jerd.12396
  27. Thillaigovindan, R., Rai, R., Mishal, M., & Priya, T. (2019). Recent advances in ceramics—a review. World J Pharm Res, 8, 515-24.
  28. Ziwei, M., & Han, L. L. (2023). Scientometric Review of Sustainable Land Use and Management Research. Aquatic Ecosystems and Environmental Frontiers, 1(1), 21-24.
  29. Zlatanovska, K. A., Dimova, C., Gigovski, N., Korunoska-Stevkovska, V., & Longurova, N. (2019). Fracture localisation of porcelain veneers with different preparation designs. Open Access Macedonian Journal of Medical Sciences, 7(10), 1675. https://doi.org/10.3889/oamjms.2019.323