SavedAdd your journal

Journals / Natural and Engineering Sciences / 2025 / Volume: 10 Issue: 2

Prepared Panel and Film from Nano pigment it used to Improve the Efficiency Conversion of Solar Cells

Alaa M. Mohamed0009-0007-9811-7117
Hussam M. Hwail0000-0002-8103-8419
Ahmed M. Hassan0009-0002-6259-4492
Basim A. Almayahi0000-0001-7052-8060
Pages
—
Publication Date
2025-09-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

All epoxy polymer and glycerin liquid used during the preparation process were maintained at constant levels, as they did not significantly affect the characteristics or performance of the panels and films integrated with solar cells.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The nano pigment synthesized from chloroauric acid was utilized in the fabrication of panels and films, which served as luminescent solar concentrators (LSCs) to enhance the energy conversion efficiency of solar cells.
📊
Key Findings & Data:Based on the optical measurements, the nano pigment demonstrated the ability to both absorb and transmit a significant portion of solar radiation, indicating its high potential for efficient light management in photovoltaic applications.
💡
Conclusion & Impact:All epoxy polymer and glycerin liquid used during the preparation process were maintained at constant levels, as they did not significantly affect the characteristics or performance of the panels and films integrated with solar cells.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Crystal · film · Nano pigment

Abstract

The nano pigment synthesized from chloroauric acid was utilized in the fabrication of panels and films, which served as luminescent solar concentrators (LSCs) to enhance the energy conversion efficiency of solar cells. Based on the optical measurements, the nano pigment demonstrated the ability to both absorb and transmit a significant portion of solar radiation, indicating its high potential for efficient light management in photovoltaic applications. Based on the results, production with the panel and film led to solar cells that work more efficiently than before. Analysis with XRD determined that the pigment forms in nanoscale crystals with sizes of (30–60) nm. The thicknesses of the panel and the film, along with the concentration of nano pigments, were maintained at constant values. All epoxy polymer and glycerin liquid used during the preparation process were maintained at constant levels, as they did not significantly affect the characteristics or performance of the panels and films integrated with solar cells.

🔖

Cite This Article

Mohamed, A. M., Hwail, H. M., Hassan, A. M., Almayahi, B. A. (2025). Prepared Panel and Film from Nano pigment it used to Improve the Efficiency Conversion of Solar Cells. Natural and Engineering Sciences, Volume: 10 Issue: 2. https://doi.org/10.28978/nesciences.1733120

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Aadiwal, V., Upadhyay, S., Nagappan, B., & Wani, T. A. (2025). Investigating the Influence of Physiographic Factors on Habitat Selection by Cetacean Species in Marine Environments. Natural and Engineering Sciences, 10(1), 301-311. https://doi.org/10.28978/nesciences.1646474
  2. Abbas, F. S. (2013). Luminescent solar concentrators to improve solar cells conversion efficiency, MSc. Thesis, College of Science –University of Kufa.
  3. Alhindi, H., Traore, I., & Woungang, I. (2021). Preventing Data Loss by Harnessing Semantic Similarity and Relevance. J. Internet Serv. Inf. Secur., 11(2), 78-99.
  4. Alkhayatt, A. H. O., Habieb, A. A., Al-Noaman, A. H. A., & Hameed, A. A. (2019, July). Structure, surface morphology and optical properties of CuxZn1-xS/Au NPs layer for photodetector application. In Journal of Physics: Conference Series (Vol. 1234, No. 1, p. 012012). IOP Publishing. https://doi.org/10.1088/1742-6596/1234/1/012012
  5. Araby, F. H. (2006). Study the effect of three factors on the output parameters of silicon solar cells, MSc. Thesis, Babylon University.
  6. Ataiwi, A. H., & Abdul-Hamead, A. A. (2009). Study some of the structure properties of ZrO2 ceramic coats prepared by spray pyrolysis method. Eng. and Tech. Journal, 27(16), 2918-2930.
  7. Bakari, S. (2016). Impact of exports and imports on economic growth in Canada: empirical analysis based on causality.
  8. Milev, N., Takashi, K., Shoei, O., & Atsunori, N. (2024). State-of-the-art Application of the Log-piling Method in the Role of Shallow Ground Improvement for Liquefaction Mitigation. Archives for Technical Sciences, 1(30), 59-78. https://doi.org/10.59456/afts.2024.1630.059M
  9. Mohammed Rubin, D., & Yusuf, A. (2014). General Physics, 9th edition.
  10. Skoog, D. A. (2010). Analytical Chemistry, skoog west Holler Crouch-Michigan state University, U.S.A.
  11. Tauc, J. (Ed.). (2012). Amorphous and liquid semiconductors. Springer Science & Business Media.
  12. Tauce, J. (1974). Amorphous & Liquid Semiconductors. Plenum, London & New York.
  13. Thahab, S. M., Alkhayatt, A. H. O., & Zgair, I. A. (2016). Influences of post-annealing temperature on the structural and electrical properties of mixed oxides (CuFeO2 and CuFe2O4) thin films prepared by spray pyrolysis technique. Materials Science in Semiconductor Processing, 41, 436-440. https://doi.org/10.1016/j.mssp.2015.10.013
  14. Zhang, J., Chen, C., & Cohen, R. (2010). A Scalable and Effective Trust-Based Framework for Vehicular Ad-Hoc Networks. J. Wirel. Mob. Networks Ubiquitous Comput. Dependable Appl., 1(4), 3-15.
  15. Alkhayatt, A. H. O., Habieb, A. A., Al-Noaman, A. H. A., & Hameed, A. A. (2019, July). Structure, surface morphology and optical properties of CuxZn1-xS/Au NPs layer for photodetector application. In Journal of Physics: Conference Series (Vol. 1234, No. 1, p. 012012). IOP Publishing. https://doi.org/10.1088/1742-6596/1234/1/012012