SavedAdd your journal

Journals / Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi / 2026 / Cilt: 7 Sayı: 1

Determination of Titanium in Zinc ash by FAAS After Digested using Ultrasound-Assisted Extraction

Fatma Kurşun(KIRKLARELI UNIVERSITY)0000-0003-0212-0973
Buse Dağcı(KIRKLARELI UNIVERSITY)0000-0001-9363-9951
Cemile Özcan(Kırklareli Üniversitesi)0000-0002-2954-0612
Pages
147–154
Publication Date
2021-06-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The best solvent mixtures for Ti metal in galvanized waste was found HCl:HNO3:H2O2 (1:3:2) > HCl > HNO3:HCl (1:3) > HNO3 > HNO3:H2SO4 (3:1) > HNO3:H2SO4 (1:1) > HNO3:H2SO4 (3:2) > HNO3:H2SO4 (2:1), respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it is aimed to determine the amount of Ti (titanium) in waste ash samples taken from galvanizing factories by using flame atomic absorption (FAAS).
📊
Key Findings & Data:Various time periods and different solvent mixtures were examined by using ultrasound-assisted extraction for digestion of zinch ash which taken from various processes of galvanizing metal sheet or pipe.
💡
Conclusion & Impact:The best solvent mixtures for Ti metal in galvanized waste was found HCl:HNO3:H2O2 (1:3:2) > HCl > HNO3:HCl (1:3) > HNO3 > HNO3:H2SO4 (3:1) > HNO3:H2SO4 (1:1) > HNO3:H2SO4 (3:2) > HNO3:H2SO4 (2:1), respectively.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Ses destekli ekstraksiyon · atık kül · Titanyum

Abstract

In this study, it is aimed to determine the amount of Ti (titanium) in waste ash samples taken from galvanizing factories by using flame atomic absorption (FAAS). Various time periods and different solvent mixtures were examined by using ultrasound-assisted extraction for digestion of zinch ash which taken from various processes of galvanizing metal sheet or pipe. The best solvent mixtures for Ti metal in galvanized waste was found HCl:HNO3:H2O2 (1:3:2) > HCl > HNO3:HCl (1:3) > HNO3 > HNO3:H2SO4 (3:1) > HNO3:H2SO4 (1:1) > HNO3:H2SO4 (3:2) > HNO3:H2SO4 (2:1), respectively.

Özet

Bu çalışmada, alevli atomik absorpsiyon (FAAS) kullanılarak galvaniz fabrikalarından alınan atık kül örneklerindeki Ti (titanyum) miktarının belirlenmesi amaçlanmıştır. Çeşitli galvanizleme sac veya boru proseslerinden elde edilen çinko külünün çözünürleştirilmesi için ses destekli ekstraksiyon kullanılarak çeşitli zaman periyotları ve farklı çözücü karışımları incelenmiştir. Galvanizli atıkta Ti metali için en iyi çözücü karışımları sırasıyla, HCl:HNO3:H2O2 (1:3:2) > HCl > HNO3:HCl (1:3) > HNO3 > HNO3:H2SO4 (3:1) > HNO3:H2SO4 (1:1) > HNO3:H2SO4 (3:2) > HNO3:H2SO4 (2:1) olarak bulunmuştur.

🔖

Cite This Article

Kurşun, F., Özcan, C. (2021). Determination of Titanium in Zinc ash by FAAS After Digested using Ultrasound-Assisted Extraction. Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, Cilt: 7 Sayı: 1, 147–154. https://doi.org/10.34186/klujes.941163

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Dvorak, P., Jandova, J., Hydrometallurgical recovery of zinc from hot dip galvanizing ash. Hydrometallurgy, C 77, S 29-33, 2005.
  2. Ahmer, C., Maaß, P., Peißker, P., Handbook of Hot-dip Galvanization. WILLEY-VCH Verlag GmbH & Co, KGaA, Weinheim, 2011.
  3. Delvasto, P., Casal-Ramos, J. A., González-Jordán, O., Durán-Rodríguez, N. C., Domínguez-Vargas, J. R., Moncada, P., Caracterización de residuos sólidos procedentes de dos procesos distintos de galvanizado en caliente por inmersión, Revista De Metalurgia, C 48(1), S 33-44, 2012.
  4. Trpcevska, J., Holkova, B., Briancin, J., Koralova, K., Piroskova J., The pyrometallurgical recovery of zinc from the coarse-grained fraction of zinc ash by centrifugal force, Int. J. Miner. Process., C 143, S 25-33, 2015.
  5. Url4, erişim tarihi 13.06.2020.
  6. Ogden, H. R., Clifford, A. H., Rare Metals. Handbook, Reinhold Publishing Corporation, Chapman&Hall Ltd., London, UK,, S 559-579, 1961.
  7. Url-1, erişim tarihi 31.03.2020.
  8. Burke, R. A., Hazardous Materials Chemistry for Emergency Responders, CRC Press, S 51-516, 2013.
  9. Petry, C. F., Capeletti, L. B., Stedile, F. C., dos Santos, J. H. Z., Pozebon, D., Determination of Titanium and Vanadium in Ziegler-Natta Catalysts by Inductively Coupled Plasma Atomic Emissin Spectrometry, Analytical, Sciences, The Japan Society for Analytical Chemistry, C 22, S 855-859, 2006.
  10. Mirzaei, M. Naeini A. K., Determination of Trace Amounts of Titanium by Flame Atomic Absorption Spectrometry after Cloud Point Extraction, Journal of Analytical Chemistry, C 68(7), S 595-599, 2013.
  11. Harris, D. C., Quantitative Chemical Analysis (8th edition) Translation Editor: Türker, A.R., Ankara, 2015.
  12. Url4, erişim tarihi 13.06.2020.
  13. Url-1, erişim tarihi 31.03.2020.