SavedAdd your journal

Journals / Journal of Scientific Reports-A / 2001 / Issue: 002

Flotation and Flotation Machines

FLOTASYON ve FLOTASYON MAKİNELERİ

İsmail Bentli
Pages
97–110
Publication Date
2001-06-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, research on flotation machines are carried out to reduce environmental hazards from waste disposal and clean waste/effluent water.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper mainly reviews flotation processes and conventional flotation machinery used in mineral processing applications.
📊
Key Findings & Data:The main development research activities concentrate on three basic categories.
💡
Conclusion & Impact:Finally, research on flotation machines are carried out to reduce environmental hazards from waste disposal and clean waste/effluent water.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Flotasyon · Mekanik flotasyon makineleri · Flotasyon kolonu

Abstract

This paper mainly reviews flotation processes and conventional flotation machinery used in mineral processing applications. It also presents geometrical, mechanical ratios and hydrodynamic properties of mechanical flotation machines. Some desired properties of flotation machines are high capacity, low operating cost, low energy consumption, great amounts of fine bubble creation and so on. The main development research activities concentrate on three basic categories. Primarily, the rehabilitation of existing flotation machinery are considered, which is most recently popular. Secondly, innovation and design of high capacity flotation machines are developed. Finally, research on flotation machines are carried out to reduce environmental hazards from waste disposal and clean waste/effluent water.

Özet

Bu çalışmada, flotasyon yöntemi ve mevcut klasik fiotasyon makineleri kısaca anlatılmıştır. Mekanik flotasyon makinelerinin tasarımında ve özelliklerinin belirlenmesinde kullanılan geometrik, mekanik oranlar ve hidrodinamik numaralar ise özetlenmiştir. Flotasyon makinelerinden yüksek kapasite, düşük maliyet, enerji tasarrufu, çok ince kabarcık çapı vs gibi özellikler istenmektedir. Flotasyon makineleri üzerinde yapılan çalışmalar üç temel noktada yoğunlaşmaktadır. Birincisi son yıllarda önemle üzerinde durulan, tesiste kullanılan mekanik flotasyon makinelerinin iyileştirilmesidir. İkincisi, büyük hacimli yeni tasarılar geliştirmektir. Sonuncusu ise çevresel problemleri azaltmak amacıyla katı atıkların geri kazanılması ve atık suların temizlenmesinde artan bir şekilde kullanılmasıdır.

🔖

Cite This Article

Bentli, İ. (2001). Flotation and Flotation Machines. Journal of Scientific Reports-A, Issue: 002, 97–110. https://ajindex.com/articles/1512580

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (31)

  1. Akar, A., 1985, “Cevher Hazırlama Tesis ve Dizaynı” Dokuz Eylül Üniversitesi Müh.- Mim. Fak. MM/MAD-85 EY 01, İzmir, 271 s.
  2. Arbiter, N., Harris, C.C., Yap, R.F., 1969, “Hydrodynamics of Flotation Cells” AIME Transactions, V:244, pp 134-148.
  3. Ata S., Önder, Y.Ü., 1997, “Yeni bir Flotasyon Teknolojisi: Jameson Flotasyon Hücresi” Madencilik, C: 36, No: 4, s 21-29.
  4. Atak, S., 1982, “Flotasyon İlkeleri ve Uygulamaları” İTÜ Maden Fakültesi, İstanbul, 222s.
  5. Aytekin, Y., Yamık, A., İpekoğlu, Ü., 1988, “Cevher Hazırlama ve Zenginleştirmedeki Gelişmeler” Akdeniz Üniversitesi İsparta Müh. Fak. Dergisi, Maden Müh. Seksiyonu, (Ed) Yamık, S: 1, İsparta, pp 1-13.
  6. Bentli, İ., 2000, “Flotasyon Makine Tasarımı” Osmangazi Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, Eskişehir, 215 s.
  7. Bischofberger, C., Schubert, M., 1996, “On the Microprocesses Air Dispersion and Particle-Bubble Attachment in Flotation Machines” Aufbereitungs Technik, V:37, N:5 pp 193-202.
  8. Degner, V.R., 1990, “Mechanical Flotation Machine Design”, Industrial Practice of Fine Coal Processing, SME-AIME, Ch.16, pp 135-146.
  9. Gorain, B.K., Franzidis, J.P., Manlapig, E.V., 1997, “Studies on Impeller Type, Impeller Speed and Air Flow Rate in an Industrial Scale Flotation Cell: Effect of Bubble Surface Area Flux on Flotation Performans” Minerals Engineering, V:10, N:4, pp 367-379.
  10. Harris, C.C., 1976, “Flotation Machines in Flotation” Gaudin Memorial Volume, SMEAIME, V:2, pp 753-815.
  11. Harris, C.C., Khandrika S.M., 1985, “Flotation machine design: Impeller-Stator Interaction” Powder Technology, V:43, pp 273-278.
  12. Harris, C.C., Lepetic V., 1966, “Flotation Cell Design” Society of Mining Engineering, September, pp 67-72.
  13. Kaya, M., 1998, Flotasyon El Kitabı, Osmangazi Üni. Müh.-Mim. Fak. Maden Müh., Tekam Yayın No: TN98-002-MK, 4.Baskı, Eskişehir, 146 s.
  14. Kaya, M., Kurama, H., 1999, “The Role of Flotation in Waste Recycling/Recovery” 8th Balkan Mineral Processing Conference, Belgrade, Yugoslavia, pp 729-736.
  15. Kaya, M., Laplante A.R., 1986a, “Factors influencing design, hydrodynamics, mixing, residence time distribution, scale-up, selection and sizing of mechanical flotation machines” Mineral Separation Systems, Seminar, McGill University 32 p.
  16. Kaya, M., Laplante A.R., 1986b, “Investigation of Batch and Continuous Flotation Kinetics in a Modified Denver Laboratory Cell” Canadian Metallurgical Quarterly, V:25 N:l, pp 1- 8.
  17. Kaya, M., Laplante, A.R., 1989, “Froth washing in mechanical flotation cells” 21st Canadian Mineral Processors Meeting (CMP), pp 497-541.
  18. Koivistoinen P., 1991, “High Grade Flotation Machine”, 17th International Mineral Processing Congress, Dresden, Almanya, sayfa 227-235.
  19. Leskinen, T., 1998, “Large Cell Flotation Improved Beneficiation”, Industrial Minerals, July, pp 55-57.
  20. Nelson M.G., Lelinski, D., 2000, “Hydrodynamic Design of Self-Aeration Flotation Machine”, Mineral Engineering, V:13, No:10-ll, pp 991-998.
  21. Önal, G., Acarkan, N., Güney A., 1996, “Cevher hazırlamadaki yeni gelişmeler” 21. Yüzyıla Girerken Türkiye Madenciliği, Cumhuriyet Üniversitesi Maden Mühendisliği Bölümü, Sivas, s 157-170.
  22. Öteyaka, B., Soto, H., 1992, “Modelling of negative bias column for coarse particle flotation”, Proceedings of 4th Int. Proc. Sym., (Ed.) Özbayoğlu, Antalya, Turkey, V: 1, pp 315-326.
  23. Özbayoğlu, G., Hiçyılmaz, C, 1984, “Geliştirilmiş Laboratuvar Flotasyon Hücresi” Madencilik, C: 23, No: 2, s 53-56.
  24. Parga, J.R., Mercado, H., Ojeda, H., Salazar, A., 1996, “New Flotation Cell for Precious Metal Recovery” Changing Scopes in Mineral Processing, (Ed) Kemal, Akar, Canbazoğlu, Printed in Balkema, Rotterdam, pp 365-370.
  25. Podobnik, D.M., Dunstan, P.L., Lawrence, G.A., 1985, “Performence Characteristics of Large Flotation Mechanisms Operating in a Copper Slime Circuit” Aufbereitungs Technik, V: 11, pp 652-659.
  26. Ross, V.E., 1997, “Particle-Bubble Attachment in Flotation Froths” Minerals Engineering, V:10, N:7, pp 695-706.
  27. Schubert, M., Bischofberger, C., 1978, “On the Hydrodynamics of Flotation Machines” Int. Journal of Mineral Processing, 5, Elsevier, pp 131-142.
  28. Terblanche, A.N., Grobler, W.A., Önal G., Güney, A., 1998, “Turbo Flotation Column with Enhanced Flotation Performance” Proceedings of 7th Int. Proc. Sym., (Eds.) Atak, Önal, Çelik, Istanbul, Turkey, pp 257-262.
  29. Wills. B.A., 1988, “Mineral Processing Technology (4lh edition)” Pergamon Press, New York, 584 p.
  30. Yoon R.H., 1991, “Hydrodynamic and Surface Forces in Bubble-Particle Interactions” 17th International Mineral Processing Congress, Dresden, Almanya, pp 17-31.
  31. Young P., 1982, “Flotation Machines” Mining Magazines, January, pp 35-59.